Zielinski, T., Riemer, O. 2023.
The influence of an energetic field on the diamond turning process of distinct metals. euspen’s 23rd International Conference & Exhibition, Copenhagen, DK, 12.-16. June 2023. Copenhagen, DK: euspen, 2023, 251-252.

Gelbrich, J. 2023.
How knowledge of material changes everything previously planned. 15th ICOM-CC group on Wet Organic Archaeological Materials Conference, Mainz 2023, Mainz,. Hovmand, I., Felter, M., Stelzner, I., Sangouard, E., Vadiljeva, N., Sulivan K., Hrsg. Mainz: 2023, 159-165. ISBN: 978-2-491997-62-5.

Gelbrich, J., Frick, J., Gänz, P., Simon, S. Conrad, S. Reichert, M. 2023.
Long-term properties of treated waterlogged archaeological wood - a comparative study of three treatments. 15th ICOM_CC Group an Wet Archaeological Materials Coference, Mainz,. Mainz: 2023, 67-75. ISBN: 978-2-491997-62-5.

Adam, B., Riemer, O., Rickens, K., Heinzel, C. 2023.
Precision grinding of BK7 glass with coarse-grained diamond grinding wheels. euspen’s 23rd International Conference & Exhibition, Technical University of Denmark, Copenhagen, DK, 12-16 June 2023. Riemer, O., Nisbet, C., Philips, D., Hrsg. Technical University of Denmark, Copenhagen, DK: euspen, 2023, 501-502. ISBN: 978-1-9989991-3-2.

Schönemann, L., Adam, B., Riemer, O., Karpuschewski, B. 2023.
Precision machining of glassy carbon. euspen’s 23rd International Conference & Exhibition, Technical University of Denmark, Copenhagen, DK, 12-16 June 2023. Riemer, O., Nisbet, C., Philips, D., Hrsg. Technical University of Denmark, Copenhagen, DK: euspen, 2023, 463-466. ISBN: 978-1-9989991-3-2.

Borysenko, D., Kundrák, J., Karpuschewski, B., Welzel, F., Maros, Z., Felhő, C. 2023.
Surface Residual Stresses in High-Feed Face Milling of Carbon Steel. Vehicle and Automotive Engineering 4, Cham, 2023. Jármai, K., Cservenák, Á., Hrsg. Cham: Springer International Publishing, 2023, 648-653. ISBN: 978-3-031-15211-5.

Buss, L., Falcone, M., Fritsching, U. 2022.
Towards an Understanding of Multiphase Fluid Dynamics inside a Tool Microchannel Applied to Minimum Quantity Lubrication: A Numerical Analysis. 14 th European Fluid Mechanics Conference - EFMC14, Athens, Greece, 13th-16th Sept. 2022. Athens, Greece: 2022,

Stodt, M.F.B., Kiefer, J., Fritsching, U. 2022.
Impact of atomization flow structure and turbulence on droplet microexplosions in the FSP process. ILASS Conference on liquid and atomization and spray systems. 2022,

Landgraf, P., Narayan, N., Frichting, U., Lampke, T. 2022.
Development of a prognosis tool to predict heat treatment results for heterogeneous gas quenching steels. 31st International Conference on Metallurgy and Materials (METAL 2022), Brno, Czech Republic, EU, 18-19.05.2022. Brno, Czech Republic, EU: TANGER Ltd, 2022, 395-401. DOI: https://doi.org/10.37904/metal.2022.4412. ISBN: 978-80-88365-06-8. OPEN ACCESS

Chouhan, A., Mädler, L., Ellendt, N. 2022.
Numerical modelling of defect formation in multi-material, multi-track and multi-layer Laser Powder Bed Fusion Process. Additive Fertigung – Werkstoffe – Prozesse – Wärmebehandlung, June 29th-30th, 2022. 2022, 100-110.

Lübben, T., Frerichs, F. 2022.
Quenching with Aqueous Polymer Solutions. 27th IFHTSE Congress & European Conference on Heat Ttreatment 2022, Salzburg,. Salzburg: 2022,

de Castro, P., Silveira, A. C. F., Dong, J., Turra, C. J., Rocha, A. S., Fechte-Heinen, R., Epp, J. 2022.
Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing. 27th IFHTSE Congress & European Conference on Heat Treatment 2022, Salzburg,. Salzburg: 2022,

Dörgeloh, T., Schönemann, L., Riemer, O., Karpuschewski, B. 2022.
Enhanced ultra-precision machining of discontinuous microstructures on monolithic surfaces. euspen's 22nd International Conference & Exhibition, Geneva, CH, 2022-05-30/2022-06-03. Geneva, CH: euspen, 2022, 471-474.

Weicht, A., Achelis, L., Peters, M., Uhlenwinkel, V., Fritsching, U. 2022.
Influence of Heated Gas on Atomization of Highly Viscous Melts. ILASS - The European Conference on Liquid Atomization & Spray Systems, Tel Aviv, Israel, 06.09.2022 - 08.09.2022. ILASS-Europe, Hrsg. Tel Aviv, Israel: ILASS-Europe, Institute for Liquid Atomization and Spray Systems, 31, 2022,

Frerichs, F., Lübben, T. 2022.
Determination of machining parameters for a specific adjustment of the residual stress profile by induction hardening. 27th IFHTSE Congress & European Conference on Heat Ttreatment 2022, Salzburg, Österreich,. Salzburg, Österreich: 2022,

Narayan, N., Landgraf, P., Lampke, T., Fritsching, U. 2022.
Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters. 27th IFHTSE Congress & European Conference on Heat Treatment (ECHT) 2022, Salzburg, Austria, 05-08.09.2022. Austria: 27, 2022, 81-87. OPEN ACCESS

Peters, M., Weicht, A., Achelis, L., Evers, S., Hlawatsch, F., Uhlenwinkel, V., Ufermann-Wallmeier, D., Fritsching, U. 2022.
Spray-Slag – Processing of liquid blast furnace slag.. Recy & DepoTech, Montanuniversität Leoben, Austria, 9. - 11.11.2022. Wien: Pomberger, R. Adam, J. Altendorfer, M. Bouvier-Schwarz, T. Haslauer, P. Kandlbauer, L. Khodier, K. Koinig, G. Kuhn, N. Lasch, T. Mhaddolkar, N. Nigl, T. Rutrecht, B. Sarc, R. Sattler, T. M. Schlögl, S. Stipanovic, H. Tischberger-Aldrian, A. Viczek, S. A., 16, 2022, 649 - 654. ISBN: 978-3-200-08675-3.

Rathmann, L., Hasselbruch, H., Mehner, A., Radel, T. 2022.
On the combination of nitrided surfaces and LIPSS. Proceedings of the 12th Laser Application Forum - laf 2022, Bremen, Germany, 23.-24 November 2022. Bremen, Germany: 2022, 1-5.

Guba, N., Schumski, L., Espenhahn, B., Fischer, A., Meyer, D. 2022.
Bedeutung der Wechselwirkung zwischen Kühlschmierstoff und Schleifscheibe für die Kühl- und Schmierwirkung beim Schleifen. Schweizer Schleif-Symposium, 2022, Zürich, 06-07.09.2022. Zürich: 2022,

Hasselbruch, H., Decho, H., Kröner, J., Bartz, M., Mehner, A. 2022.
POSEIDON – Entwicklung reibungsarmer Kohlenstoffschichtsysteme für den Einsatz unter tribokorrosiven Betriebsbedingungen. 63. Tribologie-Fachtagung der Gesellschaft für Tribologie e. V. (GfT), Göttingen, 26.-28. September 2022. Göttingen: 2022, 1-10.

Barbieri, M., Karlin, A., Achelis, L., Fritsching, U. 2022.
Effect of mixing chamber geometry of a Y-jet atomizer on spray asymmetry. 14th European Fluid Mechanics Conference EFMC 14, Athens, Greece, 13th-16th Sept. 2022. Athens, Greece: 2022,

Barbieri, M., Karlin, A., Achelis, L., Fritsching, U. 2022.
Impact of the Mixing Chamber Geometry of a Y-jet Atomizer on Atomization Efficiency and Spray Characteristics. 31th Conference on Liquid Atomization and Spray Systems - ILASS-Europe 2022, Tel Aviv (Virtual), Israel, 6-8 September 2022. Tel Aviv (Virtual), Israel: 2022, 8. OPEN ACCESS

Barbieri, M., Karlin, A., Achelis, L., Meier, H., Fritsching, U. 2022.
Impact of mixing chamber geometry of a Y-jet atomizer on spray droplet sizes and velocities. Jahrestreffen der ProcessNet-Fachgruppen Mehrphasenströmungen, Mechanische Flüssigkeitsabtrennung sowie Zerkleinern und Klassieren, Online event,. Online event: 2022,

Heinzel, J., Guba, N., Hüsemann, T., Heinzel, C. 2022.
Identifikation thermischer Prozessgrenzen beim Schleifen. Schweizer Schleif-Symposium, 2022, Zürich, 06-07.09.2022. Zürich: 2022,

Bastiani, F. H., Bianchi Neto, P., Buss, L., Fritsching, U., Noriler, D. 2022.
Modeling the Carbon Black Production in Enclosed FSP Reactor. 7 th World Congress on Momentum, Heat and Mass Transfer, Lisbon, Portugal (on-line),. Lisbon, Portugal (on-line): 2022, DOI: 10.11159/icmfht22.148. OPEN ACCESS

Hlawatsch, F., Aycil, H., Küstermann, R., Peters, M., Küver, J., Kropp, J., Ufermann-Wallmeier, D. 2022.
Der Wertstoff Porenbeton-Bruch - Vorschlag für eine umfassende Verwertungsstrategie. 16. Recy & DepoTech-Konferenz, Montanuniversität Leoben, Österreich, 09.-11.11.2022. Leoben: Pomberger, R. Adam, J. Altendorfer, M. Bouvier-Schwarz, T. Haslauer, P. Kandlbauer, L. Khodier, K. Koinig, G. Kuhn, N. Lasch, T. Mhaddolkar, N. Nigl, T. Rutrecht, B. Sarc, R. Sattler, T. M. Schlögl, S. Stipanovic, H. Tischberger-Aldrian, A. Viczek, S., 16, 2022, 687-692. ISBN: 978-3-200-08675-3.

Hoja, S., Haupt, N., Steinbacher, M., Fechte-Heinen, R. 2022.
Martensitic Induction Hardening of Nitrided Layers. 27th IFHTSE Congress & European Conference on Heat Treatment, Salzburg, Austria,. Leoben, Austria: ASMET, 2022,

Bäuerlein, B., Schanz, D., Schröder, A., Avila, K. 2022.
Lagrangian particle tracking and measurements of particle rotation elucidate dynamics of pulsatile particle-laden pipe flow. Fachtagung “Experimentelle Strömungsmechanik”, Ilmenau, Germany, 06.09.-08.09.2022. Cierpka, C., Hrsg. Karlsruhe: Deutsche Gesellschaft für Laser-Anemometrie GALA e.V, 29, 2022, 10-11. ISBN: 9783981676488. OPEN ACCESS

Schönemann, L., Dörgeloh, T., Riemer, O., Schreiber, P., Klemme, H., Denkena, B. 2022.
Ultra-precision high performance cutting of nickel silver using a magnetically levitated feed axis. euspen's 22nd International Conference & Exhibition, Geneva, CH, 2022-05-30/2022-06-03. Geneva, CH: euspen, 2022, 505-508.

Schönemann, L., Meyer, D., Uhlenwinkel, V., Karpuschewski, B. 2022.
Digital twin for material-oriented production of complex functional parts via additive-subtractive hybrid manufacturing. Additive Fertigung - Werkstoffe - Prozesse - Wärmebehandlung 2022, Bremen, 2022-06-29/30. Bremen: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e. V. (AWT), 2022, 201-210.

Schönemann, L., Riemer, O. 2022.
Towards digital ultra-precision manufacturing. 37th ASPE Annual Meeting, Bellevue, WA, USA, 10.-14.10.2022. Bellevue, WA, USA: American Society for Precision Engineering, 78, 2022, 371-374.

Soltmann, C., Pille, D., Heuser, M., Horeis, R., Peters, M. 2022.
Collapsible cores for aluminium investment casting. 31st EICF International Conference “Materials & Supplies – Challenges for the Investment Casting Industry”, Santander, Spain, 16.05.2022. Santander, Spain: European Investment Casters Federation – EICF, 2022,

Buss, L., Bianchi Neto, P., Noriler, D., Fritsching, U. 2021.
Gas Dynamics Impact on the Particle Structure and Properties Synthesized via Heterogeneous Flame Spray Process. 13th European Congress of Chemical Engineering and 6th European Congress of Applied Biotechnology, online, 20-23 Sep. 2021. online: EFCE, 2021,

Stodt, M., Fritsching, U., Kiefer, J. 2021.
Laser-based investigation of the spray evaporation of drops in a heterogeneous spray for flame spray pyrolysis. Experimentelle Strömungsmechanik GALA 2021, Bremen, 7-9 Sep. 2021. Bremen: 2021,

Stodt, M., Groeneveld, J., Mädler, L., Kiefer, J., Fritsching, U. 2021.
Combustion of Multi-Component Drops during Flame Spray Pyrolysis. International Conference on Liquid Atomization and Spray Systems (ICLASS), Edinburgh, UK,. Edinburgh, UK: 1, 2021, 9. DOI: doi.org/10.2218/iclass.2021.5836. OPEN ACCESS

Stodt, M. F. B., Fritsching, U., Kiefer, J. 2021.
Laser-based investigation of the spray evaporation of drops in a heterogeneous spray for flame spray pyrolysis. Experimentelle Strömungsmechanik GALA 2021, Bremen, 7-9 Sep. 2021. Bremen: 2021,

Charni, D., Ishkina, S., Epp, J., Herrmann, M., Schenck, C., Kuhfuss, B. 2021.
Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars. 13th International conference on the Technology of Plasticity ICTP2021, Online, 25-30.07.2021. Online: Springer International Publishing, 2021, 10. DOI: 10.1007/978-3-030-75381-8.

Surm, H. 2021.
Advanced distortion analysis in the complex plane. ECHT 2021 and QDE – 2nd International Conference on Quenching and Distortion Engineering, Online, 27.-28.04.2021. Online: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e. V., 2021, 158-167.

Li, M., Karpuschewski, B., Riemer, O. 2021.
Control of shear thickening rheological properties of polishing slurry. euspen’s 21st International Conference & Exhibition, Copenhagen, DK, June 2021, virtual,. euspen, Hrsg. virtual: euspen, 2021, 2.

Lübben, T., Kagathara, J., Fechte-Heinen, R. 2021.
Influence of the quenching process on the distortion behavior of a weight-reduced counter gear. ECHT 2021 and QDE 2021, online, 27.-28.04.21. Lübben, T., Kleff, J., Hrsg. online: AWT e.V., 2021, 177-187.

Wang, Y., Zhou, T., Riemer, O., Heidhoff, J., Karpuschewski, B. 2021.
FEM simulation of tribological performance with structured surface. euspen’s 21st International Conference & Exhibition, Copenhagen, DK, June 2021, virtual,. euspen, Hrsg. virtual: euspen, 2021, 2.

Mehdi, B., Gopalkrishna, S.B., Narayan, N., Ryll, S., Woche, H., Specht, E., Fritsching, U. 2021.
Quenching of moving metal plates with flat sprays and single full jet nozzle. 3. Aachener Ofenbau-und Thermoprozess Kolloquium, Aachen, Germany, Aachen, Germany, 07-08.10.2021. IOB and RWTH Aachen Germany, Hrsg. Germany: 3, 2021, 323-330. ISBN: 978-3-96463-021-6. OPEN ACCESS

Fechte-Heinen, R., Lübben, T. 2021.
Quenching and Distortion. ECHT 2021 and QDE 2021, online, 27.-28.04.21. Lübben, T., Kleff, J., Hrsg. online: AWT e.V., 2021, 189-208.

Zerwas, A. A., Avila, K., de Paiva, J. L., Guardani, R., Achelis, L., Fritsching, U. 2021.
Image Analysis of the Atomization Process in a Molten Metal Close-Coupled Atomizer for Different Gas Pressures and Temperatures. International Conference on Liquid Atomization and Spray Systems (ICLASS), Edinburgh, UK,. Edinburgh, UK: 1, 2021, 8. DOI: doi.org/10.2218/iclass.2021.5813. OPEN ACCESS

Narayan, N., Fritsching, U., Gopalkrishna, S.B., Mehdi, B., Woche, H., Specht, E. 2021.
Investigation of Heat Transfer in Arrays of Water Jets Modelling/ Simulation and Experimental Approach. ECHT 2021 and QDE 2021, Online Conference, April 27th – 28th, 2021, Online, 27.-28.4.2021. Online: AWT, 2021, 10. OPEN ACCESS

Offley, S., Taake, M., Lübben, T. 2021.
Monitoring product temperature in a combined carburising furnace and oil quench bath. ECHT 2021 and QDE 2021, online, 27.-28.04.2021. Lübben, T., Kleff, J., Hrsg. online: AWT e.V., 2021, 99-106.

Rafagnim, N., Bianchi Neto, P., Fritsching, U., Noriler, D. 2021.
OpenFOAM custom solver for Flame Spray Pyrolysis simulation. International Conference on Liquid Atomization and Spray Systems (ICLASS). 1, 2021, DOI: doi.org/10.2218/iclass.2021.6153. OPEN ACCESS

Rafagnim, N., Neto, P. B., Fritsching, U., Noriler, D. 2021.
OpenFOAM custom solver for Flame Spray Pyrolysis simulation. International Conference on Liquid Atomization and Spray Systems (ICLASS), Edinburgh, UK, 29.08.-02.09.2021. Edinburgh, UK: 1, 2021, 8. DOI: doi.org/10.2218/iclass.2021.6153. OPEN ACCESS

Rafagnim, N. Z., Bianchi Neto, P., Noriler, D., Fritsching, U. 2021.
Influence of Double Flame Spray Pyrolysis on nanoparticle size. EPTT 2020 12th Spring School on Transition and Turbulence. 2021, DOI: 10.26678/ABCM.EPTT2020.EPT20-0002.

Rafagnim, N.Z., Neto, P., Noriler, D., Fritsching, U. 2021.
Influence of Double Flame Spray Pyrolysis on nanoparticle size. EPTT 2020 12th Spring School on Transition and Turbulence. 2021, DOI: 10.26678/ABCM.EPTT2020.EPT20-0002.

Giefer, P., Fritsching, U. 2021.
Numerical investigation of capillary driven droplet breakup due to fluiddynamic instabilities. International Conference on Liquid Atomization and Spray Systems (ICLASS), Edinburgh, UK, 29.08. - 02.09.2022. Edinburgh, UK: 1, 2021, 8. DOI: doi.org/10.2218/iclass.2021.6015. OPEN ACCESS

Giefer, P., Fritsching, U. 2021.
Contact Angle Effect on Drop Deformation and Breakup in Microchannels. SURFACE WETTABILITY EFFECTS ON PHASE CHANGE PHENOMENA, Brighton, 6 - 8 Oct. 2021. Marengo, M., Hrsg. Brighton: 2021, OPEN ACCESS

Adam, B., Riemer, O., Karpuschewski, B. 2021.
Velocity dependent material removal in abrasive subaperture polishing. euspen’s 21st International Conference & Exhibition, Copenhagen, DK, June 2021, virtual, 07.-10. Juni 2021. euspen, Hrsg. virtual: euspen, 2021, 2. ISBN: 978-0-9957751-9-0.

Heidhoff, J., Beckschwarte, B., Riemer, O., Schönemann, L., Herrmann, M., Schenck, C., Kuhfuß, B. 2021.
Electromagnetic Embossing of Optical Microstructures with High Aspect Ratios in Thin Aluminum Sheets. 24th International Conference on Material Forming (ESAFORM 2021), Belgien, Lüttich (online), 14.04.2021. Belgien, Lüttich (online): 2021, 9. DOI: 10.25518/esaform21.4337. OPEN ACCESS

Barbieri, M., Utzig, J., Meier, H., Achelis, L., Fritsching, U. 2021.
Spray characterization of an internal-mixing atomizer at different air-to-liquid ratios. Jahrestreffen der ProcessNet Fachgruppen Mehrphasenströmung (MPH) und Computational Fluid Dynamics (CFD), Online event,. Online event: 2021,

Barbieri, M., Utzig, J., Meier, H. F., Achelis, L., Fritsching, U. 2021.
Coupled analysis of the spray quality of an internal-mixing atomizer for FCC application. 13th European Congress of Chemical Engineering and 6th European Congress of Applied Biotechnology, online,. online: EFCE, 2021,

Barbieri, M., Zerwas, A., Avila, K., Meier, H. F., Guardani, R., Achelis, L., Fritsching, U. 2021.
Characterizing the spatio-temporal dynamics of sprays from high speed recordings of gas assisted atomizers. Droplets 2021, Darmstadt,. Darmstadt: 2021,

Barbieri, M., Zerwas, A., Utzig, J., Meier, H. F., Achelis, L., Fritsching, U. 2021.
Drop dynamics and size distribution in a dense spray produced by a twin-fluid atomizer. International Conference on Liquid Atomization and Spray Systems (ICLASS). 1, 2021, DOI: doi.org/10.2218/iclass.2021.5804. OPEN ACCESS

Bäuerlein, B., Avila, K. 2021.
Three-dimensional particle tracking in pipe flows from distorted images. Fachtagung “Experimentelle Strömungsmechanik”, Bremen, Germany, 07.-09. 09. 2021. Bremen, Germany: Deutschen Gesellschaft für Laser-Anemometrie GALA e.V., 28, 2021, 7. ISBN: 978-3-9816764-7-1. OPEN ACCESS

Hunkel, M. 2021.
Experimental determination and modelling of tempering effects of martensite during quenching and annealing of a bearing steel EN 100Cr6. ECHT 2021 and QDE – 2nd International Conference on Quenching and Distortion Engineering, Online, 27.-28.04.2021. Online: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e. V., 2021, 126-136.

Bianchi Neto, P., Buss, L., Fritsching, U., Noriler, D. 2021.
Modelling polydisperse nanoparticle production in an enclosed flame spray pyrolysis reactor. 15 th International Conference on Liquid Atomization and Spray Systems (ICLASS 2021), Edinburgh, Scotland (Online), 29.08.-02.09.2021. Edinburgh, Scotland (Online): ILASS – Europe, Institute for Liquid Atomization and Spray Systems, 1, 2021, 8. DOI: 10.2218/iclass.2021.6108. OPEN ACCESS

Kamenov, D., Achelis, L., Uhlenwinkel, V., Fritsching, U. 2021.
Investigating the performance of an airblast pressure swirl atomizer. International Conference on Liquid Atomization and Spray Systems (ICLASS), Edinburgh, UK,. Edinburgh, UK: 1, 2021, 8. DOI: doi.org/10.2218/iclass.2021.5963. OPEN ACCESS

Karpuschewski, B., Heinzel, C., Eckerbrecht, J. 2021.
Funktionsorientierte Feinbearbeitung von Hochleistungswerkstoffen. Moderne Schleiftechnologie und Feinstbearbeitung, Villingen - Schwenningen,. Azarhoushang, B., Hrsg. Villingen - Schwenningen: Abricht- und Schleiftechnologie GbR, 13, 2021, 26. ISBN: 978‐3‐9821211‐9‐2.

Zielinski, T., Rickens, K., Riemer, O., Karpuschewski, B. 2020.
Ultrasonic assisted diamond turning of conventional and additive manufactured steel materials for optical components. euspen’s 20th International Conference & Exhibition, Genf, Schweiz,. Leibniz Institute for Materials Engineering, Laboratory for Precision Machining, Hrsg. Bedford, UK: euspen, 2020, 421-422. OPEN ACCESS

Rafagnim, N.Z., Neto, P., Noriler, D., Fritsching, U. 2020.
Influence of Double Flame Spray Pyrolysis on nanoparticle size. EPTT 2020 12th Spring School on Transition and Turbulence, Blumenau, Brasilien,. Blumenau, Brasilien: 2020, DOI: 10.26678/ABCM.EPTT2020.EPT20-0002.

Rickens, K., Riemer, O., Lucca, D. A. 2020.
Analysis of surface integrity of orthogonal diamond cut single-crystal Calcium Fluoride for ultraviolet and vacuum ultraviolet wavelength applications. euspen 2020, Geneva, CH,. Geneva, CH: euspen, 2020, 2.

Schoenemann, L., Riemer, O., Karpuschewski, B. 2020.
Performance of ultraprecision milling with thermally adjustable cutting edges. euspen’s 20th International Conference & Exhibition, Geneva, CH (virtual),. Geneva, CH (virtual): 2020, 367-370.

Kagathara, J., Lübben, T. 2020.
Case Hardening Simulation of a Complex Spur Gear. ECHT 2020, Antwerp, Belgium, 25.-27.03.2020. Antwerp, Belgium: A3TS, VWT, 2020, 9.

Klemm, R., Pimentel, J., Irretier, A., Dalgic, M., Zoch, H. W., Krieger, K. L. 2020.
In-situ Detection of Fatigue Cracks by Acoustic Emission Techniques in Large Trailer Frames. ASNT 2020. American Society for Nondestructive Testing, 2020, 10.

Stadlbauer, E., D’ham, G., Ehling, A., Niemeyer, R., Reulecke, C., Rinne, A., Schlütter, F., Skasa-Lindermeir, B. 2020.
Preservation and conservation of Goslar slate - The example of the Mönchehaus in the world heritage historic city of Goslar, Germany. International Congress on the Deterioration and Conservation of Stone. Siegesmund, S., Middendorf, B., Hrsg. Mitteldeutscher Verlag, 2020,

Stodt, M., Buss, L., Kiefer, J., Fritsching, U. 2019.
Atomization and Spray Characteristics of the SpraySyn-nozzle. ICMF 10th International Conference on Multiphase Flow, Rio de Janeiro, Brazil, May 19.-24, 2019. Rio de Janeiro, Brazil: Elsevier, 2019,

Buss, L., Sander, S., Noriler, D., Fritsching, U. 2019.
Particle-Residence-Time in Production and Separation Processes in Enclosures. 10th International Conference on Multiphase Flow, Rio de Janeiro, Brazil,. Rio de Janeiro, Brazil: Elsevier Ltd, 2019, CD-ROM. DOI: 10.1016/j.applthermaleng.2020.116354. ISBN: 1359-4311. OPEN ACCESS

Li, H., Mädler, L. 2019.
Nanoparticle synthesis in spray flames: Single droplet combustion of the flame spray pyrolysis precursor-solvent solutions. Photon Tools for Physical Chemistry, Beatenberg, Switzerland, 08.-11.01.2019. Beatenberg, Switzerland: Schweizerischer Chemiker-Verband, 73, 2019, CD-ROM. ISBN: 0009-4293.

Li, H., Wu, Y., Riefler, N., Wriedt, T., Wu, X., Mädler, L. 2019.
Preliminary investigation on single isolated burning droplet using digital in-line holography.. The 18th Electromagnetic and Light Scattering Conference, HangZhou, China,. HangZhou, China: 2019, CD-ROM.

Cui, C., Nadolski, D., Schulz, A. 2019.
Development of composite tool steels via successive spray forming and selective heat treatment. Tooling 2019 Conference & Exhibition, Aachen, 12-16 May 2019. Broeckmann, C., Hrsg. Aachen, Germany: TEMA Technologie Marketing AG, 2019, 1-8. DOI: 10.3139/105.110371.

Tosello, G., Gulcur, M., Whiteside, B.;, Coates, P., Luca, A., Fook, P., Riemer, O., Danilov, I., Yahyavi Zanjani, M., Hackert‐Oschätzchen, M., Schubert, A., Baruffi, F., Ben Achour, S., Calaon, M., Valentin Nielsen, C., Bissacco, G., Rasmussen, A., Bellotti, M., Saxena, K., Qian, J., Reynaerts, D., Santoso, T., Syam, W., Leach, R., Kuria Kose, S., Parenti, P., Annoni, M., Cai, Y., Luo, X., Qin, Y., Zeidler, H. 2019.
Micro product and process fingerprints for zero-defect net-shape micromanufacturing. 19th international conference of the european society for precision engineering and nanotechnology, Bilbao, Spain,. Bilbao, Spain: euspen, 2019, CD-ROM. ISBN: 978-0-9957751-4-5.

Uhlenwinkel, V., Schulz, A., Cui, C., Theisen, W., Röttger, A., Boes, J., Zoch, H.-W., Walther, F., Tenkamp, J., Stern, F. 2019.
High-alloyed steel powders with increased nitrogen content for laser additive manufacturing. Tooling 2019 Conference & Exhibition, Aachen, 12-16 May 2019. Broeckmann, C., Hrsg. Aachen, Germany: TEMA Technologie Marketing AG, 2019, 1-8.

Lopushenko, I., Wriedt T. 2019.
The Generalized Multipole Method for the Simulation of Light Scattering by Superellipsoids.. Bremen Workshop 2019., Bremen, 18.-19.03.2019. Wriedt T., Hrsg. Berlin, Germany: Epubli, 2019, 128. ISBN: 9783750249899.

Lu, Y., Hasselbruch, H., Messaoudi, H., Mehner, A., Werner, C., Vollertsen, F. 2019.
Micro-structuring of multi-layered a-C:H:W/a-C:H coatings using ultrashort laser pulses. 11. Mittweidaer Lasertagung, Mittweida,. Mittweida: Hochschule Mittweida, 2019, 21-24.

Lübben, T., Kagathara, J. 2019.
Distortion of gears as consequence of lightweight construction – influence of toothing. European Conference on Heat Treatment, Bardolino, Italy,. Bardolino, Italy: Milano: Associazione italiana di metallurgia, 2019,

Decho, H., Mehner, A. 2019.
Entwicklung von wasserstoffhaltigen amorphen Kohlenstoffschichten (a-C:H) für mediengeschmierte Anwendungen in korrosiven Umgebungsmedien. 60. Tribologie-Fachtagung, Göttingen, Deutschland, 23-25.09.2019. Aachen: Gesellschaft für Tribologie e.V., 2019, 1-4. ISBN: 9783981745146.

Luca, A., Flosky, C., Riemer, O. 2019.
Effect of thermal conductivity on the achievable flow length of micro injection moulded parts. Proceedings of the 19th international conference of the european society for precision engineering and nanotechnology, Bilbao, Spain,. Bedford, UK: euspen, 2019, CD-ROM. ISBN: 9780995775145. OPEN ACCESS

Mensching, N., Meyer, D. 2019.
Potential of deep rolling as a finishing process directly after SLM to generate beneficial surface and subsurface properties. euspen' 19th International Conference & Exhibition, 2019, Bilbao, Spanien,. Bilbao, Spanien: euspen, 2019, 370-371. ISBN: 978-0-9957751-4-5.

Fook, P., Riemer, O., Karpuschewski, B. 2019.
Surface integrity investigation of ground ceramic workpieces for biomedical applications. 19th international conference of the european society for precision engineering and nanotechnology, Bilbao, Spain,. Bedford, UK: euspen, 2019, 288-291. ISBN: 978-0-9957751-4-5.

Frerichs, F., Lübben, T. 2019.
Application of different measuring techniques for characterization of quenching processes in water based polymer solutions. 26th IFHTSE Congress, Moskau, Russland,. Moscow: Metallurgizdad: Metallurgizdat, Proc. 26th IFHTSE Congress, Sept. 17.-19., 2019, 2019, 157-162. ISBN: 9785604340301.

Naatz, H., Pokhrel, S., Mädler, L. 2019.
Solid State Diffusion Controlled Dissolution of Iron-doped Copper Oxide Nanoparticles Opens a Therapeutic Window for Cancer Therapy In-Vitro and In-Vivo. Proc. MRS Boston, Boston, USA, Dec. 1.-6, 2019. Boston, USA: Materials Research Society, 2019,

Okulov, I., Okulov, A. V., Soldatov, I. V., Volegov, A. S., Kato, H., Mädler, L. 2019.
Towards a new class of biomedical materials: open porous metals and interpenetrating-phase composites by liquid metal dealloying.. EUROMAT 2019, Stockholm, Sweden,. Millersville, PA: Materials research proceedings, 16, 2019, CD-ROM.

Pokhrel, S., Gockeln, M., Mädler, L. 2019.
Designing Energy Storage Materials and Layer Fabrication Procedures for the Thin/Thick film Batteries. Proc. MRS Boston, Boston, USA, Dec. 1.-6, 2019. Boston, USA: Materials Research Society, 2019,

Prado, M. V., Jüngst, N., Fritsching, U., Noriler, D. 2019.
Development of an Aerosol reactor model for the synthesis of nanoscale materials. ICMF 10th International Conference on Multiphase Flow, Rio de Janeiro, Brazil, May 19.-24., 2019. Rio de Janeiro, Brazil: Elsevier, 2019,

Rafagnim, N. Z., Hodapp, M. H., Bianchi, N.P., Meier, H. F., Fritsching, U., Noriler, D. 2019.
Numerical Analysis of the Mixing Process on the Double Flame Spray Pyrolysis. ICMF 10th International Conference on Multiphase Flow, Rio de Janeiro, Brazil, May 19.-24., 2019. Rio de Janeiro, Brazil: Elsevier, 2019,

Sackmann, D., Heinzel, J., Karpuschweski, B. 2019.
An approach for reliable classification of process specific influences using the Barkhausen noise multiparameter analysis. 13th International Conference on Barkhausen Noise and Micromagnetic Testing, Prague, Czech Republic,. Prague, Czech Republic: Charles University, 2019, 1-9.

Gulcur, M., Whiteside, B., Fook, P., Rickens, K., Riemer, O. 2019.
Process and product fingerprint concept for microinjection moulding of thermoplastic microneedle arrays. 19th international conference of the european society for precision engineering and nanotechnology, Bilbao, Spain,. Bilbao, Spain: euspen, 2019, 2. ISBN: 978-0-9957751-4-5.

Schluetter, F., Johannsen, Ch. 2019.
Die Restaurierungsarbeiten an der Marienkirche Lübeck – Vorgeschichte, aktuelle Vorgehensweise, Analytik und Lösungsansätze.. Giphaltiges Mauerwerk am Baudenkmal, Erhalten – Instansetzen – Ersetzen?, Mühlhausen, Germany,. Mühlhausen, Germany: Institut für Steinkonservierung e.V., 2019, 57-70. ISBN: ISSN 0945-4748.

Acar, S., Gerstein, G., Nürnberger, F., Cui, C., Schulz, A., Steinbacher, M., Wunde, M., Kurzynski, J. 2019.
Deep Cryogenic Treatment of X153CrMoV12 Cold-work Tool Steel. Tooling 2019 Conference & Exhibition, Aachen, 12-16 May 2019. Broeckmann, C., Hrsg. Aachen, Germany: TEMA Technologie Marketing AG, 2019, 8.

Schlütter, F. 2019.
Umgang mit hydrophobiertem Ziegel- und Natursteinmauerwerk – Materialkundliche Zusammenhänge, Untersuchungen und Lösungsansätze.. Tagungsband der EIPOS-Sachverständigentage Immobilienbewertung und Sachverstand am Bau 2019, Dresden,. Stuttgart: EIPOS GmbH, 2019, 82-107. ISBN: 978-3-7388-0314-3 3738803149.

Heinzel, C., Eckebrecht, J., Karpuschewski, B., Jermolajev, S. 2019.
Process performance, energy efficiency and surface integrity in grinding.. 18th Intern. Manufacturing Conference, Shenyang, China,. Shenyang, China: Shenyang University of Science and Technology, 2019, 28-40.

Beinhauer, A., Vetter, K., Heinzel, C., Riemer, O., Freiße, H. 2019.
Influence of the alloy composition on acoustic emission signals in discontinuous micro turning. 19th euspen International Conference & Exhibition, Bilbao, Spain,. euspen, Hrsg. Bilbao, Spain: euspen, 2019, 402–403. ISBN: 9780995775145.

Schönemann, L., Riemer, O., Brinksmeier, E., Karpuschewski, B. 2019.
Surface simulation for ultra-precision milling with multiple cutting edges. 69th General Assembly, Birmingham, United Kingdom,. International Academy for Production Engineering, Hrsg. Birmingham, United Kingdom: Elsevier, 2019, CD-ROM.

Birkhofer, H., Taylor, B., Romero, H. P., Lübben, T. 2019.
Distortion of a fixture hardened planet gear blank - a Finite Element simulation study. 26th IFHTSE Congress, Moscow, Russia,. Moscow, Russia: Metallurgizdat, 2019, 202-206. ISBN: 9785604340301.

Schulz, A., Fritsching, U. 2019.
Comparison of numerical approaches for drop breakup in microporous channels ECCE12.. 12th European Congress Of Chemical Engineering, Florence, Italy, Sept. 15.-19., 2019. Milan: AIDIC servizi SRL, 2019, 572-573. DOI: 10.3303BOA1901. ISBN: 9788895608754.

Schulz, A., Fritsching, U. 2019.
Modeling of transport of rheological complex multiphase fluids in pores and porous membranes.. ICMF 10th International Conference on Multiphase Flow, Rio de Janeiro, Brazil, May 19.-24., 2019. Rio de Janeiro, Brazil: Elsevier, 2019, CD-ROM.

Bobrov, I., Epp, J. 2019.
High throughput material state analysis via Barkhausen Noise-Eddy current microscope. 13th International Conference on Barkhausen Noise and Micromagnetic Testing, Prague, Czech Republic, September 23-26. Proceedings auf Datenstick, Hrsg. Prague, Czech Republic: Fraunhofer Publica, 2019, 8.

Karpuschewski, B., Kundrák, J., Felh ő , C., Varga , G., Borysenko, D. 2019.
Effects of the tool edge design on the roughness of face milled surfaces. XXIII International Conference on Manufacturing (Manufacturing 2018), Kecskemét, Hungary,. London: IOP Publishing, 448, 2019, CD-ROM. DOI: 10.1088/1757-899X/448/1/012056.

Klümper-Westkamp, H., Hoja, S., Skalecki, M. G. 2019.
Carbonitriding of forging dies to improve lifetime. 11. Tooling Conference & Exhibition, Aachen,. Aachen: TEMA Technologie Marketing AG, 2019, CD-ROM.

Klümper-Westkamp, H., Skalecki, M. G. 2019.
Non-destructive material microstructure analysis during heat treatment - A building block for industry 4.0.. 5th International Symposium on Nondestructive Characterization of Materials, Portoroz, Slovenien,. Portoroz, Slovenien: Gordon & Breach Science Publishers Ltd., 2019, CD-ROM. ISBN: 2881248470 978-2881248474.

Seidel, B., Heinzel, C., Meyer, D., Geilert, P., Karpuschewski, B. 2019.
Sustainable machining by energy- and resource-efficient application of metalworking fluids.. 17th Global Conference on Sustainable Manufacturing, Shanghai, China,. Amsterdam: Elsevier, 43, 2019, 151-158. DOI: 10.1016/j.promfg.2020.02.129. ISBN: 2351-9789.

Stodt, M., Wagenfeld, S., Fritsching, U., Kiefer, J. 2018.
Spektroskopische Analyse von Präkursoren für die Flammensprühpyrolyse. Experimentelle Strömungsmechanik, 26. Fachtagung, Rostock,. Grundmann, S., Brede, M., Ruck, B., Leder, A., Dopheide, D., Hrsg. Karlsruhe: Deutsche Gesellschaft für Laser-Anemometrie GALA e.V., 2018, CD-ROM. ISBN: 978-3-9816764-5-7 ISSN 2194-2447. OPEN ACCESS

Calaon, M., Quagliotti, D., Loaldi, D., Zhang, Y., Riemer, O., Schönemann, L., Tosello, G. 2018.
Tolerance chain verification in nano surface manufacturing - from clean room to functional tests. 68th CIRP General Assembly, Tokyo, Japan, 19-25.08.2018. Tokyo, Japan: Elsevier, 2018, CD-ROM.

Lübben, T., Surm, H., Zoch, H.-W. 2018.
Distortion of gear base bodies in consideration of lightweight construction. 1st Int. Conf. on Quenching and Distortion Engineering, Nagoya, Japan,. Nagoya, Japan: QDE, 2018, 1-6.

Dong, J., Epp, J., Lipinski, R., Sorg, M., Zoch, H.-W., Fischer, A. 2018.
Development of a non-destructive photothermal technique for in-process analysis of nitriding. European Conference on Heat Treatment, Friedrichshafen,. Bremen, Germany: AWT - Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V., 2018, 23-32. ISBN: 9783000611674.

Luca, A., Siesenis, H., Riemer, O. 2018.
Prediction of shrinkage and warpage effects of a micro component via injection molding process simulation. Conference: WCMNM 2018, At Portorose, Slovenia,. At Portorose, Slovenia: WCMNM, 2018, 167-170. DOI: 10.3850/978-981-11-2728-1_08. OPEN ACCESS

Wieland, S., Kagathara, J., Gärtner, E., Uhlenwinkel, V., Steinbacher, M. 2018.
Powder, process parameters and heat treatment conditions for Laser Beam Melting of LaFeSi-based alloys. International Conference on Caloric Cooling: Thermag VIII, Darmstadt, Germany,. Paris, France: International Institute of Refrigeration, 5, 2018, DOI: 10.18462/iir.thermag.2018.0003. ISBN: 9782362150289.

Willert, M., Rickens, K., Riemer, O. 2018.
Surface integrity in ultrasonic assisted diamond cutting of steel. 6th International Conference on Nanomanufacturing, Brunel, University London, UK,. Brunel, University London, UK: Leibniz Institute for Materials Engineering - IWT, 2018, CD-ROM.

Engler, T., Käfer, S., Schumacher, J., Kripak, G., Oechsner, M., Melz, T., Zoch, H.-W. 2018.
Erarbeitung und experimentelle Verifizierung einer Methodik zur Absicherung von zyklischen hochbelasteten Motorkomponenten in korrosiven Kraftstoffen. Tagungsband Informationstagung Motoren: FVV-Herbsttagung, Würzburg, Deutschland,. Frankfurt am Main: Forschungsvereinigung Verbrennungskraftmaschinen e.V., 584, 2018, 310.

Willert, M., Riemer, O., Karpuschewski, B. 2018.
Analysis of mechanical impact in precision cutting processes. euspen's 18th International Conference & Exhibition, Venedig, Italien,. Bedford, UK: euspen, 2018, 359–360. ISBN: 9780995775121.

Fook, P., Rickens, K., Riemer, O. 2018.
Surface and subsurface characterization of Bioceramic workpieces machined by micro-grinding. euspen's 18th international conference & exhibition, Venice, Italy,. Bedford, UK: Euspen, 2018, 463-464. ISBN: 9780995775121.

Fook, P., Riemer, O. 2018.
Characterisation of Zirconia-based Ceramics after Micro-Grinding. WCMNM 2018 World Congress on Micro and Nano Manufacturing, Portoro ž, Slowenien,. New York, NY: ASME, 2018, 175-178. DOI: 31.

Frerichs, F., Lübben, T. 2018.
Simulation of High Speed Quenching of Grooved steel cylinders. 1st International Conference on Quenching and Distortion Engineering, Nagoya, Japan,. Nagoya, Japan: QDE, 2018,

Mostaghimi, F., Fischer-Bühner, J., Heemann, L., Hofmann, P., von Hehl, A., Uhlenwinkel, V. 2018.
Anti-satellite system for the improvement of powder quality in Additive Manufacturing using a Fe-Mn alloy. Euro PM2018 Congress & Exhibition, Bilbao, Spanien,. Shrewsbury, United Kingdom: European Powder Metallurgy Association (EMPA), 2018, 1-6. ISBN: 978-1-899072-50-7.

Fritsching, U., Buss, L., Meier, H. F., Noriler, D. 2018.
Spray Formation and Propagation in Open and Enclosed Reactors. DIPSI Workshop 2018 on Droplet Impact Phenomena and Spray Investigation, Bergamo, Italien,. Cossali, Gianpietro Elvio; Tonini, Simona, Hrsg. Bergamo: Università degli studi di Bergamo, 2018, 9-12. DOI: 10.6092/DIPSI2018_pp09-12. ISBN: 9788897413271. OPEN ACCESS

Schlütter, F. 2018.
Erfahrungen mit hydrophobiertem Ziegelmauerwerk. , Kassel, 26.06.2018. Institut für Steinkonservierung e.V., Hrsg. Kassel: 54, 2018, 25-36. ISBN: 0954-4748.

Schlütter, F., Ziemann, M., Joksch, U. 2018.
Seltene Pigmente in Wandmalereien im Nordosten Brandenburgs - Nachweis, Herkunft und Veränderungen. Tagungsband Archäometrie und Denkmalpflege, Hamburg, 20-24.03.2018. Glaser, L., Hrsg. Hamburg: Verlag Deutsches Elektonen Synchrotron, 2018, 264-267. ISBN: 978-3-945931-16-5.

Hlawatsch, F., Aycil, H., Kropp, J. 2018.
Autoclaved aerated concrete (AAC) rubble for new recycling building products: In dry premixed mortars for masonry, in masonry blocks, and in lightweight blocks. 6th Int. Conf. on Autoclaved Aerated Concrete (ICAAC), Potsdam,. Potsdam: Ernst & Sohn, 2, 2018, 457-464. DOI: 10.1002/cepa.877. ISBN: 25097075. OPEN ACCESS

Hlawatsch, F., Juling, H. 2018.
Systematische mikroskopische Untersuchung der Abbindeprozesse in flugstaubhaltigen Betonen. Tagungsband 20. Int. Baustofftagung ibausil, Weimar,. Weimar: F. A. Finger-Institut für Baustoffkunde, Bauhaus-Universität Weimar, 1, 2018, 699-706. ISBN: 978-3-00-059950-7.

Hlawatsch, F., Küstermann, R., Kropp, J. 2018.
Grobe Rezyklat-Körnungen aus Porenbetonbruch in geschäumten Mauerwerkselementen - eine nachhaltige Verwertungsstrategie. Mineralische Nebenprodukte und Abfälle 5, Neuruppin,. Neuruppin: TK Verlag, 2018, 422–442. ISBN: 978-3-944-310-41-1.

Hlawatsch, F., Küstermann, R., Kropp, J. 2018.
Leichter Schaumstein aus groben Porenbetongranulaten. Tagungsband 20. Int. Baustofftagung ibausil, Weimar,. Weimar: F. A. Finger-Institut für Baustoffkunde, Bauhaus-Universität Weimar, 2018, 335-342. ISBN: 978-3-00-059951-4.

Schönemann, L. 2018.
Ultra-Precision High Performance Cutting. 4th International Summer School on Trends in ultra-precision optical surface engineering, Leipzig, 04.09.2018. Leipzig: IOM Leipzig, 2018, CD-ROM.

Hoja, S., Hoffmann, F., Klümper-Westkamp, H., Zoch, H.-W. 2018.
Investigation of the tempering effect during Nitriding. European Conference on Heat Treatment, ECHT2018, Friedrichshafen, Deutschland,. Klümper-Westkamp, H., Winter, K.-M., Hrsg. Bremen, Germany: AWT - Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V., 2018, 51–59. ISBN: 9783000611674.

Bauerdick, C., Klümper-Westkamp, H. 2018.
Energieeffiziente Wärmebehandlung. ETA – Die Modell Fabrik, Energieeffizienz weiter gedacht, Darmstadt,. Abele, E., Schneider, J., Beck, M., Maier, A., Hrsg. Darmstadt: 2018, 19–23. ISBN: 978-3-00-059397-0. OPEN ACCESS

Holthusen, A.-K., Riemer, O., Brinksmeier, E. 2018.
FTS-Diamond turning of structured surfaces and impact of the structure angle on the process forces. 18th International Conference euspen, Venedig, Italien,. Bedford, UK: euspen, 2018, ISBN: 9780995775121.

Holthusen, A.-K., Riemer, O., Karpuschewski, B. 2018.
Euspen SIG Meeting. International Conference of the European Society for Precision Engineering and Nanotechnology 2018, Paris, Frankreich,. Paris, Frankreich: euspen, 2018,

Holthusen, A.-K., Riemer, O., Karpuschewski, B. 2018.
Fast Tool Servo diamond machining of structured freeform-surfaces. Euspen SIG Meeting 2018, Paris, France,. Paris, France: euspen, 2018, aud CD.

Beinhauer, A., Riemer, O., Heinzel, C. 2018.
Influence of alloy composition and heat treatment on the cutting force in discontinuous micro turning. 6th International Conference on Nanomanufacturing, nanoMan2018, Brunel University London, UK,. Brunel University London, UK: MAPEX Center for Materials and Processes, 2018, 5.

Schönemann, L., Holthusen, A.-K., Riemer, O. 2018.
Process chains for the mass production of functional structured surfaces. Proc. 33rd ASPE Annual Meeting, Las Vegas, NV, USA,. Raleigh, NC: American Society for Precision Engineering, 2018, CD-ROM. ISBN: 9781887706773.

Berger, D., Schönemann, L., Riemer, O., Brinksmeier, E. 2018.
High speed cutting of monocrystalline silicon by off-axis diamond turning.. 33rd ASPE Annual Meeting, Las Vegas, NV, USA,. Raleigh, NC: American Society for Precision Engineering (ASPE), 70, 2018, 184-189. ISBN: 9781510876460.

Juling, H. 2018.
Untersuchungen zur Korrosion von Orgelpfeifen aus dem 17. Und 18. Jahrhundert. Jahrestagung am Deutschen Elektronen Synchrotron, Hamburg, 20.-24.03.2018. Glaser, L., Hrsg. Hamburg: Verlag Deutsches Elektronen Synchrotron, 2018, 22-24. ISBN: 978-3-945931-16-5.

Birkhofer, H., Flach, H., Lübben, T. 2018.
Optimizing mandrel dimensions for a fixture hardening process by Finite-Element-simulation. 1st Int. Conf. on Quenching and Distortion Engineering, Nagoya, Japan,. Nagoya, Japan: ATT, 2018, 6. OPEN ACCESS

Kagathara, J., Hunkel, M. 2018.
A Process Chain Simulation of Cold Forming and Heat Treatment Incorporating Segregation. 1st Int. Conf. on Quenching and Distortion Engineering, Nagoya, Japan,. Nagoya, Japan: QDE, 2018, 6.

Kämmler, J., Borchers, F., Meyer, D., Heinzel, C. 2018.
Material removal mechanisms and deformation analysis by flycutting tests with round and polygon shaped tools on AISI4140 steel. euspen’s 18" International Conference & Exhibition, Venedig, Italien,. Venedig, Italien: euspen, 2018, 341-342. ISBN: 9780995775121. OPEN ACCESS

Kämmler, J., Guba, N., Vetter, K., Vollertsen, F., Meyer, D. 2018.
Material characterization by deep rolling of laser deep alloyed micro-sample. euspen’s 18" International Conference & Exhibition, Venedig, Italien,. Venedig, Italien: euspen, 2018, 335-336. ISBN: 9780995775121. OPEN ACCESS

Bobrov, I., Epp, J., Zoch, H. W. 2018.
Micromagnetic Analysis of Residual Stress Distribution in 42CrMo4 Steel after Thermal and Mechanical Surface Treatment. Residual Stresses 2018, Leuven, Belgium, 11.-14. Septmber, 2018. Seefeldt, M., Hrsg. Millersville, PA, USA: Materials Research Forum LLC, 6, 2018, 109-114. DOI: 10.21741/9781945291890-18. ISBN: 2474-395x. OPEN ACCESS

Kiewidt, l., Wriedt, T. 2018.
The Generalized Multiple Method: Towards Light Scattering by Arbitrary Shaped Particles.. Bremen Workshop 2018, Bremen,. Wriedt T., Hrsg. Berlin: Epubli, 2018, CD-ROM. ISBN: 978-3-7502-4987-5.

Klümper-Westkamp, H., Skalecki, M.G., Zoch, H.-W. 2018.
Process control of carbonitriding. ITG-Fachberichte 281: Sensoren und Messsysteme, Nürnberg,. Nürnberg: VDE Berlin, 2018, ISBN: 978-3-8007-4683-5. OPEN ACCESS

Klümper-Westkamp, H., Winter, K. M. 2018.
Nitriding and Nitrocarburising: European Conference on Heat Treatment. ECHT 2018, Friedrichshafen, Deutschland,. Klümper-Westkamp, H., Winter, K. M., Hrsg. Bremen: AWT Bremen, 2018, 224. ISBN: 798-3-00-061167-4.

Sonnenberg, H.;, Clausen, B. 2018.
Compression tests on spherical micro samples. Tagung Werkstoffprüfung, Bad Neuenahr, 06.12.2018 - 07.12.2018. Moninger, G., Hrsg. Düsseldorf: Stahlinstitut VDEh, 2018, 1-6. ISBN: 9783941269996.

Sonnenberg, H., Clausen, B. 2018.
Mikrodruckprüfung an sphärischen Proben. Tagungsband Werkstoffprüfung 2018, Bad-Neuenahr, Deutschland,. Moninger, G., Hrsg. Bad-Neuenahr, Deutschland: 2018, 143-148.

Burkart, K., Clausen, B., Zoch, H.-W. 2017.
Evaluation of multiple-flaw failure of bearing steel 52100 in the VHCF regime and description of the single-flaw behaviour. Proc. 7th Int. Conf. on VHCF (VHCF-7), Dresden,. Zimmermann, M., Christ, H.-J., Hrsg. Siegen, Germany: Universität, Lehrstuhl für Materialkunde und Werkstoffprüfung, 2017, 6. ISBN: 9783000569609.

Buss, L., Bianchi Neto, P., Meier, H. F., Fritsching, U., Noriler, D. 2017.
Numerical Analysis of the Flame Spray Process Applied to Nanoparticle Production. ILASS 29th Annual Conference on Liquid Atomization and Spray Systems, Atlanta, GA, USA,. Atlanta, GA, USA: ILASS – Europe, Institute for Liquid Atomization and Spray Systems, 2017, auf CD. OPEN ACCESS

Buss, L., Bianchi Neto, P., Meier, H. F., Fritsching, U., Noriler, D. 2017.
Numerical Analysis of the Flame Spray Process: Influence of the Combustion Kinetic Mechanism. World Congress of Chemical Engineering WCCE 2017, Barcelona, Spain,. Amsterdam: Elsevier Science, 2017, auf CD.

Kunze, A., von Hehl, A., Zoch, H.-W. 2017.
Weldable Metallic Joining Elements in Fibre Reinforced Thermoplastics. 2nd International Conference on Light Materials (LightMAT 2017), Bremen, Deutschland,. Hirsch, J., Kainer, K., Leyens, C., von Hehl, A., Hrsg. Bremen, Deutschland: Fraunhofer Publica, 2017, auf CD.

Kunze, A., von Hehl, A., Zoch, H.-W. 2017.
Weldable Metallic Force Transmission Elements in Fibre Reinforced Thermoplastics. European Congress & Exhibition on Advanced materials and Processes (Euromat2017), Thessaloniki, Griechenland,. Thessaloniki, Griechenland: Federation of European Materials Societies, 2017, auf CD.

Lehmhus, D., von Hehl, A., Basyrov, R., Bethke, M., Koesters, R., Busse, M., Zoch, H.-W. 2017.
Internal structuring in additively manufactured metal parts: A theoretical study on potentials and approaches based on the binder jetting process. European Congress & Exhibition on Advanced materials and Processes (Euromat2017), Thessaloniki, Griechenland,. Thessaloniki, Griechenland: Federation of European Materials Societies, 2017, auf CD.

Leonhardt, C., Otto, M., Stahl, K., Nadolski, D., Surm, H., Steinbacher, M., Zoch, H.-W. 2017.
Lightweight gearwheel design using separate gear ring and wheel body – Part I: Joining by heat treatment and testing. 5th International Conference on Steel in Cars and Trucks (SCT 2017), Amsterdam, NL,. Düsseldorf, Germany: Steel Institute VDEh, 2017, auf CD. ISBN: 9783514009066.

Tönjes, A., Ishkina, S., von Hehl, A., Schenck, C., Zoch, H.-W., Kuhfuss, B. 2017.
Untersuchung der inneren Struktur von exzentrisch rundgekneteten Bauteilen aus X5CrNi18-10. Tagungsband 8. Koll. Mikroproduktion, Bremen,. Vollertsen, F., Hopmann, C., Schulze, V., Wulfsberg, J., Hrsg. Bremen: BIAS Verlag, 2017, 107-112. ISBN: 978-3-933762-56-6.

Tönjes, A., von Hehl, A. 2017.
Method for efficient development of fast and accurate models predicting the mechanical properties of precipitation-hardenable aluminium alloys after heat treatment. 2nd Conference & Exhibition on Light Materials, Bremen,. Hirsch, J., Kainer, K., Leyens, C., von Hehl, A., Hrsg. Sankt Augustin: Deutsche Gesellschaft für Materialkunde, 2017, CD-ROM. OPEN ACCESS

Cui, C., Schulz, A., Nadolski, D. 2017.
Co-spray forming and tailored heat treatment of composite tool steels. 21st International Conference on Composite Materials, Xi’an, China,. Xi’an, China: ICCM-21, 2017, 1-11. OPEN ACCESS

Cui, C., Schulz, A., Nadolski, D. 2017.
Selective Heat Treatment of Spray-Formed Composite Tool Steel. Materials science and technology, Pittsburgh, PA, USA,. Pittsburgh, PA, USA: Association for Iron & Steel Technology, 2017, 1164-1171. DOI: 10.7449/2017/mst_2017_1164_1171.

von Hehl, A., Egorova, A. 2017.
Thermal and thermo-mechanical treatment of micro specimen for the high-throughput development of novel alloys with advanced structural properties. European Congress & Exhibition on Advanced materials and Processes (Euromat2017), Thessaloniki, Griechenland,. Thessaloniki, Griechenland: Federation of European Materials Societies, 2017, auf CD.

von Hehl, A., Kunze, A., Schumacher, J. 2017.
Advanced hybrid engineering materials – Methods for analysing complex failure mechanisms. European Congress & Exhibition on Advanced Materials and Processes (Euromat2017), Thessaloniki, Griechenland,. Thessaloniki, Griechenland: Federation of European Materials Societies, 2017, auf CD.

Waldeck, S., Fritsching, U. 2017.
Heat Transfer in the Boiling Regime of Impinging Liquid Jets. Proceedings of the 2nd World Congress on Momentum, Heat and Mass Transfer, Barcelona, Spain,. Barcelona, Spain: International ASET Inc., 2017, CD-ROM. DOI: 10.11159/icmfht17.128. ISBN: 978-1-927877-30-2. OPEN ACCESS

Luca, A., Menten, A., Flosky, C., Riemer, O. 2017.
Influence of variotherm injection moulding on the flow length of a micro part. 2017 World Congress on Micro and Nano Manufacturing, Kaohsiung, Taiwan,. Kaohsiung: WCMNM, 2017, 357-360. OPEN ACCESS

Luca, A., Riemer, O., Flosky, C. 2017.
Process/Product Fingerprint concept for micro injection moulding of a medical micro component. 8. Kolloquium Mikroproduktion, Bremen,. Bremen: BIAS Verlag, 2017, 77-82. ISBN: 978-3-933762-56-6. OPEN ACCESS

Luca, A., Riemer, O., Flosky, C. 2017.
Analysis of mould design affecting the filling behaviour of an injection moulded micro part. 17th International Conference of the European Society for Precision Engineering and Nanotechnology, Hannover, Deutschland,. Bedford: euspen, 2017, 241-243. ISBN: 9780995775107.

Dörgeloh, T., Schönemann, L., Riemer, O., Brinksmeier, E. 2017.
Diamond Micro Chiseling of retroreflective arrays on curved surfaces. euspen’s 17th International Conference & Exhibition, Hannover,. Bedford: euspen, 2017, 126-127. ISBN: 9780995775107.

Luhede, L., Fritsching, U. 2017.
Droplet breakup in multiple emulsions under application of shear stress. 3rd International Conference on Droplets, Los Angeles, USA,. Los Angeles, USA: 2017, auf CD.

Luhede, L., Schulz, A., Fritsching, U. 2017.
Stability of Stressed Emulsions prepared by Membrane Emulsification. 14th International Conference on Multiphase Flow in Industrial Plants, Desenzano del Garda (Brescia), Italien,. Desenzano del Garda (Brescia), Italien: 2017, auf CD.

Dumstorff, G., Willert, M., Riemer, O., Lang, W. 2017.
Characterizing precision cutting process by workpiece integrated printed thermocouples. 17th International Conference of the Euspen, Hannover, Deutschland,. Bedford: euspen, 2017, 60-61. ISBN: 9780995775107. OPEN ACCESS

Wellsandt, S., Putze, S., Porzel, R., Burkart, K., Hahn, M., Dalgic, M., Klein, P., Irretier, A., Thoben, K.-D., Malaka, R., Zoch, H.-W., Herrmann, A. 2017.
Forschungsdatenmanagement mit InfoSys – Ein Ansatz zum Teilen von Forschungsdaten in den Materialwissenschaften. Tagung Werkstoffprüfung, Berlin, Deutschland,. Frenz, H., Hrsg. Berlin: Deutscher Verband für Materialforschung und -prüfung e.V. (DVM), 2017, auf CD. ISBN: 9783981451672.

Willert, M., Rickens, K., Wolf, A., Riemer, O. 2017.
Study on the critical chip thickness in microcutting SiC single crystals. Proc. 17th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen), Hannover, Deutschland,. Bedford: euspen, 2017, 312-313. ISBN: 9780995775107.

Elsner-Dörge, F., Riemer, O. 2017.
Charakteristische Kraftverläufe und resultierende Formabweichungen beim Mikrofräsen von Strukturen in einer Cobalt-Chrom-Legierung. 8. Kolloquium Mikroproduktion, Bremen,. Bremen: BIAS-Verlag, 2017, 155-162. ISBN: 978-3-933762-56-6. OPEN ACCESS

Meierhofer, F., Fritsching, U. 2017.
Characterization of flame sprays generated by an air- assisted atomization nozzle. ILASS 29th Annual Conference on Liquid Atomization and Spray Systems, Atlanta, GA, USA,. Atlanta, GA, USA: 2017, auf CD.

Wollborn, T., Fritsching, U. 2017.
Adsorption behavior of beta-Lactoglobulin at liquid- liquid interfaces and degradation due to mechanical stresses. CECAM-Workshop Tackling complexity of the nano/bio interface – computational and experimental approaches, Bremen, Deutschland,. Bremen, Deutschland: Bremen Center for Computational Materials Science – BCCMS, 2017, auf CD.

Epp, J. 2017.
Effects of Hydrostatic 2nd Kind Residual Stresses and of Carbon Partitioning During Martensitic Quenching of Low Alloy Steel. International Conference on Residual Stresses, Sydney, Australia, 3-7 July, 2018. Holden, T. M., Muránsky, O., Edwards, L., Hrsg. Millersville, PA, Millersville, PA, USA: Materials Research Forum LLC, 2, 2017, 283-288. DOI: 10.21741/9781945291173-48.

Epp, J., Dong, J., Prekel, H., Fischer, A. 2017.
Combined X-ray diffraction and photothermal radiometry methods for in-situ analysis of nitriding treatment. 24th IFHTSE/A3TS Congress, Nizza, Frankreich,. Paris: A3TS, 2017, 1-10.

Wollborn, T., Knoop, C., Fritsching, U. 2017.
Dispersion of agglomerated particles in flow fields and mechanical characterization by direct tensile and compressive tests. World Congress Chemical Engineering (WCCE 2017), Barcelona, Spanien,. Amsterdam: Elsevier Science B.V., 2017, auf CD.

Fook, P., Flosky, C., Riemer, O. 2017.
Process Fingerprint for Micro Grinding of Dental Ceramic Implants. 8. Kolloquium Mikroproduktion, Bremen,. Bremen: BIAS-Verlag, 2017, 163-170. ISBN: 978-3-933762-56-6. OPEN ACCESS

Mohr, G., Johannsen, J., Knoop, D., Gärtner, E., Hummert, K., Emmelmann, C.: 2017.
Processing of a high-strength Al-Fe-Ni alloy using laser beam melting and its potential for in-situ graded mechanical properties. Lasers in Manufacturing Conference 2017, München,. Erlangen: Wissenschaftliche Gesellschaft Lasertechnik e.V., 2017, CD-ROM.

Nawaya, T., von Hehl, A., Zoch, H.-W. 2017.
Material behavior and properties of the shaped sheet parts of titanium alloys during hot creep forming. European Congress & Exhibition on Advanced materials and Processes (Euromat2017), Thessaloniki, Griechenland,. Thessaloniki, Griechenland: Federation of European Materials Societies, 2017, auf CD.

Nawaya, T., von Hehl, A., Zoch, H.-W., Wagner, S., Beck, W. 2017.
Investigation and evaluation of hot deep drawing parameters to manufacture titanium sheet metal parts for high temperature applications. 2nd International Conference on Light Materials (LightMAT 2017), Bremen, Deutschland,. Hirsch, J., Kainer, K., Leyens, C., von Hehl, A., Hrsg. Bremen, Deutschland: Fraunhofer Publica, 2017, auf CD.

Pimentel, J., Klemm, R., Dalgic, M., Irretier, A., Zoch, H.-W., Krieger, K. L. 2017.
Monitoring crack formation in metal structures with a percussion-inspired detection method. 9th NDT in Progress, Prag, Tschechische Republik,. Prag, Tschechische Republik: Institute of Thermomechanics AS CR, 2017, 67-74. ISBN: 9788087012635. OPEN ACCESS

Reimche, W., Bruchwald, O., Barton, S., Maier, H. J., Klümper-Westkamp, H., Zoch, H.-W. 2017.
Inline application of bainite sensor technology for characterizing phase transformation during cooling. Bainite – from nano to macro, Symposium on Science and Application of Bainite, Wiesbaden, 01.-02.06.17. Lohrmann, M., Zoch, H.-W., Hrsg. Bremen, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V., 2017, 153-162. ISBN: 978-3-00-057545-7.

Riefler, N., Wriedt, T., Fritsching, U. 2017.
Flexible Piezoelectric Drop-On-Demand Droplet Generation. Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems, CMT-Motores Térmicos - Politècnica de València - Spain,. Payri, Raul ; Margot, Xandra, Hrsg. Valencia: Editorial Universitat Politècnica de València, 2017, CD-ROM. DOI: 10.4995/ilass2017.2017.4846. OPEN ACCESS

Robert, C., Messaoudi, H., Riemer, O., Brinksmeier, E., Vollertsen, F. 2017.
Modifikation der Oberflächenfeingestalt monokristalliner Diamanten. 8. Koll. Mikroproduktion, Bremen,. Bremen: BIAS Verlag, 2017, 187-194. ISBN: 978-3-933762-56-6. OPEN ACCESS

Robert, C., Riemer, O., Brinksmeier, E. 2017.
Micro-structuring of single crystal diamond by ultrasonic assisted friction polishing. 17th International Conference of the European Society for Precision Engineering and Nanotechnology, Hannover, Deutschland,. Bedford: euspen, 2017, 188-189. ISBN: 9780995775107.

Robert, C., Riemer, O., Brinksmeier, E. 2017.
Bestimmung der Diamantabtragsmechanismen beim Reibungspolieren. 8. Koll. Mikroproduktion, Bremen, Deutschland,. Bremen: BIAS-Verlag, 2017, 123-128. ISBN: 978-3-933762-56-6.

Saddei, P. 2017.
Alternative mehrphasige Randschichtgefüge beim Einsatzhärten zur Steigerung der Festigkeitseigenschaften von verzahnten Getriebebauteilen. FVA Informationstagung, Würzburg,. Frankfurt: FVA, Forschungsvereinigung Antriebstechnik e.V, 2017, 19-20. OPEN ACCESS

Saddei, P. 2017.
Tragfähigkeitspotentiale und fertigungsbezogene Randzonenanalyse carbonitrierter Kegelradverzahnungen. HärtereiKongress, Köln, Deutschland,. Köln, Deutschland: Fraunhofer Publica, 2017, 31.

Saddei, P. 2017.
Metallografische Detailbetrachtung des Randschichtgefüges carbonitrierter Einsatzstähle infolge variierter Anlassbehandlungen. Tagungsband der 51. Materialografie-Tagung, Aalen, Deutschland,. Sankt Augustin: Inventum GmbH, 2017, 137-142. ISBN: 9783883554150.

Sander, S., Roloff, O., Thévenin, D., Fritsching, U. 2017.
Determination of particle drift in electrostatic precipitators using PIV. World Congress of Chemical Engineering (WCCE 2017), Barcelona, Spanien,. Barcelona, Spanien: Elsevier Science B.V., Amsterdam, 2017, auf CD.

Sarma, M., Borchers, F., Heinzel, C., Lang, w. 2017.
In situ strain measurement during a grinding process using a sensor-integrated workpiece. euspen’s 17th International Conference & Exhibition, Hannover,. Bedford: euspen, 2017, 364-365. ISBN: 9780995775107.

Güntner, C., Dobler, F., Tobie, T., Stahl, K., Nadolski, D., Steinbacher, M., Zoch, H.-W. 2017.
Load Carrying Capacity of Induction “Contour” Hardened Gears. 5th International Conference on Steel in Cars and Trucks (SCT 2017), Amsterdam, The Netherlands,. Düsseldorf, Germany: Steel Institute VDEh, 2017, auf CD. ISBN: 9783514009066.

Schlütter, F. 2017.
Naturwissenschaftler und Restauratoren als Partner beim Kulturguterhalt. Forum Wissenschaftliches Arbeiten in Restaurierung und Denkmalpflege, Berlin, 30.06.2017. Berlin: Verband der Restauratoren e.V., 2017, 85-92. ISBN: 978-3-930015-02-3. OPEN ACCESS

Schlütter, F., Juling, H. 2017.
Baustoffliche Besonderheiten und Analysen im Rah-men der Sanierungsplanung für das Antikolonial-denkmal in Bremen. Altbausanierung 12: Erfolgreich sanieren-normativ oder sachverständig? 28. Hanseatische Sanierungstage, Ostseebad Heringsdorf/Usedom, 02.-04. November 2017. BuFAS e.V., Hrsg. Ostseebad Heringsdorf/Usedom: Fraunhofer IRB Verlag, 2017, 61-72. ISBN: 978-3-7388-0038-8. OPEN ACCESS

Hasselbruch, H., Mehner, A., Zoch, H.-W. 2017.
Einfluss der Plasmanitrierparameter und anschließenden Oberflächenveredelung auf die Haftfestigkeit von Wolfram dotierten PVD-a-C:H-Schichtsystemen. 58. Tribologie-Fachtagung, Göttingen, Deutschland,. Wincierz, C., Hrsg. Aachen: GfT Gesellschaft für Tribologie e.V., 1, 2017, auf CD. ISBN: 9783981745122.

Hasselbruch, H., Mehner, A., Zoch, H.-W. 2017.
Influence of plasma nitriding parameters and subsequent surface finishing on the adhesion strength of tungsten doped PVD a-C:H coatings. 13th International Conference of THE”A” Coatings in manufacturing engineering, Thessaloniki, Griechenland,. Thessaloniki, Greece: Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department, Aristoteles University of Thessaloniki, 1, 2017, auf CD. ISBN: 9786188087859 9786188087842.

Heemann, L., Knoop, D., von Hehl, A., Mostaghimi, F., Uhlenwinkel, V., Schoob, B., Schubert, F., Kroll, L. 2017.
Approach to a faster alloy development for additive manufacturing using medium manganese steel. European Congress & Exhibition on Advanced materials and Processes (Euromat2017), Thessaloniki, Griechenland,. Thessaloniki, Griechenland: Federation of European Materials Societies, 2017, auf CD.

Heemann, L., Knoop, D., von Hehl, A., Zoch, H.-W., Wessarges, Y., Hermsdorf, J., Kaierle, S. 2017.
Feasibility of manufacturing magnesium microscale structures by selective laser melting. 2nd Internatioal Conference on Light Materials (LightMAT 2017), Bremen, Germany,. Hirsch, J., Kainer, K., Leyens, C., von Hehl, A., Hrsg. Sankt Augustin: Deutsche Gesellschaft für Materialkunde e.V., c/o INVENTUM, 2017, auf CD.

Hering, O., Ossenkemper, S., Dahnke, C., Tekkaya, A. E., Nadolski, D., Schulz, A., Hoffmann, F., Zoch, H.-W. 2017.
Cold forging and heat treament induced distortion. 5th International Conference on Steel in Cars and Trucks (SCT 2017), Amsterdam, NL,. Düsseldorf, Germany: Steel Institute VDEh, 2017, auf CD. ISBN: 9783514009066.

Herrmann, M., Böhmermann, F., Hasselbruch, H., Kuhfuss, B., Riemer, O., Mehner, A., Zoch, H.-W. 2017.
Forming without Lubricant - Functionalized Tool Surfaces for Dry Forming Applications. 4th Global Conference on Sustainable Manufacturing, GCSM 3-5 October 2016, Stellenbosch, South Africa,. Stellenbosch, South Africa: Procedia Manufacturing, 8, 2017, 533-540. DOI: 10.1016/j.promfg.2017.02.068. ISBN: 23519789.

Schönemann, L. 2017.
High speed ultra-precision manufacturing. WGP-Symposium “Production for Tomorrow”, Hannover,. University of Bremen, Hrsg. Hannover: EMO Hannover, 2017, CD-ROM.

Beinhauer, A., Heinzel, C., Riemer, O. 2017.
Determination of material properties by evaluation of machinability in multi-scale precision turning. euspen’s 17thInternational Conference & Exhibition, Hannover,. euspen, Hrsg. Hannover: euspen, 2017, 130-131. OPEN ACCESS

Huhn, S., Sonnenberg, H., Eggersglüß, S., Clausen, B., Drechsler, R. 2017.
Revealing Properties of Structural Materials by Combining Regression-based Algorithms and Nano Indentation Measurements. 10th IEEE Symposium Series on Computational Intelligence (SSCI), Hawaii, USA,. Hawaii, USA: IEEE, 2017, 1935-1940. DOI: 10.1109/SSCI.2017.8285180. ISBN: 978-1-5386-4058-6. OPEN ACCESS

Beinhauer, A., Heinzel, C., Riemer, O. 2017.
Mikrozerspanuntersuchungen zur Korrelation von Zerspanbarkeitskennwerten mit Werkstoffkennwerten. 8. Kolloquium Mikroproduktion, Bremen, 27.-28.11.17. Vollertsen, F., Hopmann, C., Schulze, V.,, Wulfsberg, J. P., Hrsg. Bremen: BIAS Verlag, 2017, 141-147. ISBN: 978-3-933762-56-6.

Hunkel, M., Said Schicchi, D. 2017.
Modeling of bainitic transformations under high stresses. Bainite – from nano to macro, Wiesbaden,. Lohrmann, M., Zoch, H.-W., Hrsg. Bremen, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V., 2017, 172-181. ISBN: 9783000575457.

Schönemann, L., Riemer, O. 2017.
Mikrozerspanung zur Erzeugung finish-bearbeiteter Flächen. Innovative Oberflächen für die Feinmechanik und den Präzisionsgerätebau, Dresden,. Dresden: EFDS Europäische Forschungsgesellschaft Dünne Schichten e.V., 2017, CD-ROM.

Schönemann, L., Riemer, O., Brinksmeier, E. 2017.
Challenges of nanometer-precise tool setting by using a thermal actuator in diamond milling. 67th General Assembly of CIRP, Lugano, Switzerland,. Oxford, Amsterdam, Boston, London: Elsevier, 2017, CD-ROM.

Böhmermann, F., Riemer, O. 2017.
Mikrofräsen von Wolframkarbid für den Mikroformenbau.. 8. Kolloquium Mikroproduktion, Bremen,. Bremen: BIAS-Verlag, 2017, 179-186. ISBN: 978-3-933762-56-6. OPEN ACCESS

Schumacher, J., Clausen, B. 2017.
Influence of an additional heat treatment on the dimensional stability and the fatigue behavior of die cast specimens made of the alloy AlSi9Cu3(Fe). 2nd Int. Conf. on Light Materials, LightMAT 2017, Bremen,. Hirsch, J., Kainer, K., Leyens, C., von Hehl, A., Hrsg. Bremen: Fraunhofer Publica, 2017, 1-4.

Klümper-Westkamp, H., Vetterlein, J., Zoch, H.-W., Reimche, W., Bruchwald, O., Maier, H. J. 2017.
New bainite sensor technology allows for a detailed view on material transformation. Bainite – from nano to macro, Symposium on Science and Application of Bianite, Wiesbaden, 01.-02.06.17. Lohrmann, M., Zoch, H.-W., Hrsg. Bremen, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V., 2017, 145-152. ISBN: 978-3-00-057545-7.

Klümper-Westkamp, H., Vetterlein, J., Zoch, H.-W., Skalecki, M. G., Bischoff, S. 2017.
Sensor system for controlled carbonitriding. 24th IFHTSE/A3TS Congress, Nizza, Frankreich,. Paris: A3TS, 2017, auf CD.

Köhler, B., Clausen, B. 2017.
Untersuchung und Charakterisierung von rundgekneteten Mikrodrähten des Stahls X5CrNi18-10. Tagung Werkstoffprüfung 2017, Berlin, 30.11.-01.12.2017. Frenz, H., Langer, J., Hrsg. Berlin: DVM u.a., 2017, 141-146. ISBN: 978-3-9814516-7-2.

Sizemore, N. E., Meyer, D., Owen, J. D., Davies, M. A 2017.
Cutting mechanics in ultra-precision machining of geranium. ASPEN/ASPE 2017 Tropical Meeting, CZ,. CZ: 2017, 61-64.

Brinksmeier, E., Schönemann, L. 2017.
Speeding up ultra-precision manufacturing. euspen’s 17th International Conference & Exhibition, Hannover,. University of Bremen, LFM – Laboratory for Precision Machining, Hrsg. Hannover: euspen, 2017, 100-101.

Köhler, B., Clausen, B., Zoch, H.-W. 2017.
Einfluss der Vorschubgeschwindigkeit beim Rundkneten des Stahls X5CrNi18-10 (1.4301) auf deren mechanische Eigenschaften sowie Gefügeeigenschaften. Tagungsband 8. Koll. Mikroproduktion, Bremen,. Vollertsen, F., Hopmann, C., Schulze, V., Wulfsberg, J., Hrsg. Bremen: BIAS Verlag, 2017, 91-98. ISBN: 978-3-933762-56-6.

Kovac, J., Mehner, A., Köhler, B., Clausen, B., Zoch, H.-W. 2017.
Ermittlung der mechanischen Eigenschaften dünner PVD-X75Cr17/X5CrNi18-10 Bimetallfolien. Tagungsband 8. Koll. Mikroproduktion, Bremen,. Vollertsen, F., Hopmann, C., Schulze, V., Wulfsberg, J., Hrsg. Bremen: BIAS Verlag, 2017, 113-121. ISBN: 978-3-933762-56-6.

Kunze, A., Clausen, J., Van der Auwera, R., von Hehl, A., Zoch, H.-W., Busse, M. 2016.
Influence of material parameters on the tensile force of integral aluminium CFRP hybrid structures fabricated by casting technology. Euro Hybrid Materials and Structures 2016, Kaiserslautern, 20.-21. April 2016. Hausmann, J., Siebert, M., Hrsg. Frankfurt: Deutsche Gesellschaft für Materialkunde e.V., 2016, 30-35. ISBN: 9783883554143. OPEN ACCESS

Kunze, A., Jansen, F., von Hehl, A. 2016.
Numerical Simulation of weldable metallic force transmission points in fibre reinforced thermoplastics (FRTP). ECCM17 - 17th European Conference on Composite Materials, München, 26.-30. June 2016. European Society for Composite Materials, Hrsg. Augsburg, Germany: MAI Carbon Cluster Management GmbH, 2016, 1-6. ISBN: 9783000533877.

Kunze, A., von Hehl, A., Jansen, F., Meyer, M. 2016.
Structural design of spot weldable force transmission elements for FRTP automotive panels. Materials in Car Body Engineering Conference 2016, Bad Nauheim, Germany,. Hannover: Vincentz Network, 2016, 175-186.

Buss, L., Meierhofer, F., Noriler, D., Meier, H. F., Fritsching, U. 2016.
Influence of air entrainment on the flame spray process. Proc. 27th Annual Conf. on Liquid Atomization and Spray Systems, Brighton, UK,. Brighton, UK: ILASS – Europe, Institute for Liquid Atomization and Spray Systems, 2016, CD-ROM. OPEN ACCESS

Caggiano, A., Said Schicchi, D., Etse, G., Martinelli, E. 2016.
Meso-Scale Modeling of Hybrid Industrial/Recycled Steel Fiber-Reinforced Concrete. VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete Island, Greece,. Crete Island, Greece: Institute of Structural Analysis and Antiseismic Research, School of Civil Engineering, National Technical University of Athens (NTUA), 2016, 2353-2362. DOI: 10.7712/100016.1965.9036. ISBN: 9786188284401. OPEN ACCESS

Caggiano, A., Said Schicchi, D., Martinelli, E., Etse, G. 2016.
Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel FRC. 4th Workshop on New Boundaries of Structural Concrete, Capri, Italien,. Capri, Italien: IMREADY Srl, 2016, 401-410. OPEN ACCESS

Lampa, A., Sander, S., Schwenck, D., Fritsching, U. 2016.
Recirculation, Entrainment and Cluster Formation in bounded Sprays. 9th International Conference on Multiphase Flow (ICMF 2016), Florence, Italy,. Florence, Italy: 2016, CD-ROM.

Langstädtler, L., Schönemann, L., Schenck, C., Kuhfuss, B. 2016.
Sequenced electromagnetic embossing and forming of optical microstructures. EUSPEN Special Interest Group Meeting Structured and Freeform Surfaces Meeting, DTU Copenhagen,. DTU Copenhagen: Euspen, 2016, CD-ROM. DOI: https://doi.org/10.17877/DE290R-17816.

Lin, M., Prahl, U., Said Schicchi, D., Hunkel, M., Weikamp, M., Hüter, C., Spatschek, R. 2016.
Multiscale finite-element and phase-field model of bainitic transformation during press hardening. Materials Science and Engineering Congress (MSE 2016), Darmstadt, Germany,. Darmstadt, Germany: German Materials Society (DGM), 2016, CD-ROM.

Cui, C., Schulz, A., Moumi, E., Kuhfuß, B., Böhmermann, F., Riemer, O. 2016.
Graded Tool Material For Micro Cold Forming Via A Novel Spray Forming Process. Proc. 10th TOOL Conf. 2016, Bratislava, Slowakei,. Bratislava, Slowakei: ASMET - The Austrian Society for Metallurgy and Materials, 2016, CD-ROM. ISBN: 9783200047860.

Londershausen, T., Schmidt, E., Sander, S., Fritsching, U. 2016.
Characterisation of Dustiness – Influence of deposit thickness. PARTEC 2016 : International Congress on Particle Technology, Nürnberg, Deutschland,. Düsseldorf: VDI Wissensforum GmbH, 2016, 66. ISBN: 978-3-18-092283-6.

Waldeck, S., Fritsching, U., Woche, H., Specht, E. 2016.
Wärmeübergang bei der Kühlung heißer Metalloberflächen mit Wasserstrahlen. Tagungsband Jahrestreffen der Fachgruppe Wärme- und Stoffübertragung, Kassel, Deutschland,. Kassel, Deutschland: VDI, DECHEMA e.V., 2016,

Lübben, T., Surm, H. 2016.
Influence of Design on Distortion of Gas and Oil Quenched Gear Base Bodies. Proc. 23rd IFHTSE Congress, Savannah, Georgia, USA,. Savannah, Georgia, USA: Curran Associates, Inc., 2016, 411-420.

Lübben, T., Zoch, H.-W. 2016.
Distortion of heat treated components - basics and examples for reduction. European Conference on Heat Treatment 2016 3rd Int. Conf. on Heat Treatment and Surface Engineering in Automotive Applications, Prag, Tschechische Republik,. Prag, Tschechische Republik: Asociace pro tepelné zpracování kov ů, 2016, 10. ISBN: 9788090446298.

Dobler, F., Tobie, T., Stahl, K., Nadolski, D., Steinbacher, M., Hoffmann, F. 2016.
Influence of hardening pattern, base material and residual stress condition on the tooth root bending strength of induction hardened gears. Proc. Int. Conf. on Power Transmissions 2016, Chongqing, China,. Chongqing, China: EDP Sciences, 2016, 27-30. DOI: 10.1201/9781315386829-45.

Luhede, L., Fritsching, U. 2016.
Tropfenbildung beim Premix-Emulgieren mit porösen Strukturen. Jahrestreffen der ProcessNet-Fachgruppen Agglomerations- und Schüttguttechnik, Computational Fluid Dynamics und Mehrphasenströmungen, Bingen, Deutschland,. Bingen, Deutschland: VDI, 2016,

Drechsler, R., Eggersglüß, S., Ellendt, N., Huhn, S., Mädler, L. 2016.
Exploring Superior Structural Materials Using Multi-Objective Optimization and Formal Techniques. 6th International Symposium on Embedded Computing and System Design, Patna, India,. Patna, India: IEEE, 2016, 13-17. DOI: 10.1109/ISED.2016.7977046. ISBN: 978-1-5090-2541-1. OPEN ACCESS

Weikamp, M., Hüter, C., Said Schicchi, D., Spatschek, R., Hunkel, M., Lin, M., Prahl, U., Friak, M. 2016.
Phase-field crystal modelling for ICME: Scale-bridging description of nonlinear elastic effects. Materials Science and Engineering Congress (MSE 2016), Darmstadt, Deutschland,. Darmstadt, Deutschland: German Materials Society (DGM), 2016,

Weikamp, M., Spatschek, R., Hüter, C., Said Schicchi, D., Hunkel, M., Lin, M., Prahl, U. 2016.
Scale bridging simulations of large deformations and bainitic transformations. JARA-HPC Symposium - Julich Aachen Research Alliance High performance computing (Symposium), Aachen, Deutschland,. Berlin, Cham: Springer, 2016, 125-138. ISBN: 9783319538617.

Meierhofer, F., Buss, L., Noriler, D., Meier, H., Fritsching, U. 2016.
The Influence of Reactor Enclosure and Gas Entrainment on Flame Sprays with Application in Nanoparticle Synthesis. 9th Int. Conf. on Multiphase Flow (ICMF 2016), Florence, Italy,. Florence, Italy: Japan Society of Multiphase Flow, 2016, CD-ROM.

Meierhofer, F., Fritsching, U. 2016.
Atomization and characterization of burning and non-burning sprays generated by air-assisted nozzles. ILASS – Europe 2016 - 27th Annual Conf. on Liquid Atomization and Spray Systems, Brighton, UK,. Brighton, UK: Institute for Liquid Atomization and Spray Systems, 2016, CD-ROM.

Epp, J. 2016.
In situ X-ray diffraction investigations of martensitic transformation and austenite modifications during quenching of low alloy steels. 23rd IFHTSE Congress, Savannah, Georgia, USA,. Red Hook, NY: Curran Associates, Inc., 2016, 440-446. ISBN: 9781510823709.

Wollborn, T., Knoop, C., Fritsching, U. 2016.
Particle and Agglomerate Dispersion in Gas Flow by Collisions and Flow induced stress. 9th Int. Conf. on Multiphase Flow (ICMF 2016), Florence, Italy,. Florence, Italy: Japan Society of Multiphase Flow, 2016, CD-ROM.

Wollborn, T., Knoop, C., Fritsching, U. 2016.
Stability of brittle agglomerates in agitated gaseous environment. PARTEC 2016 - International Congress on Particle Technology, Nuremberg, Germany,. Düsseldorf, Germany: VDI Verlag, 2016, 16. ISBN: 978-3-18-092283-6.

Etse, G., Said Schicchi, D., Caggiano, A., Ripani, M. 2016.
Discontinuos Approach for Meso-Scale Modeling of Porous Materials Like Concrete Under High Temperatures. 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures, California, USA,. Saouma, V., Bolander, J., Landis, E., Hrsg. California, USA: 2016, CD-ROM. DOI: 10.21012/fc9.301. OPEN ACCESS

Wollborn, T., Knoop, C., Fritsching, U. 2016.
Einfluss der Partikelgrößenverteilung auf die Dispergierbarkeit von Agglomeraten in oszillierender gasförmiger Umgebung. Tagungsband Jahrestreffen der ProcessNet-Fachgruppen Agglomerations- und Schüttguttechnik, Computational Fluid Dynamics und Mehrphasenströmungen, Bingen, Deutschland,. Bingen, Deutschland: VDI, 2016,

Meyer, H., Epp, J., Zoch, H.-W. 2016.
In situ X-Ray Diffraction Investigation of Surface Modifications in a Deep Rolling Process under Static Condition. Residual Stresses 2016, Sydney, Australia, 03.-07.07.2016. Thomas M. Holden, Ondrej Muránsky, Lyndon Edwards, Hrsg. Millersville, PA, USA: Materials Research Forum LLC, 2016, 431-436. DOI: 10.21741/9781945291173-73. ISBN: 978-1-94529116-6. OPEN ACCESS

Flosky, H., Feuerhahn, F., Böhmermann, F., Riemer, O., Vollertsen, F. 2016.
Performance of a Micro Deep Drawing Die Manufactured by Selective Laser Melting. The 5th International Conference on Nanomanufacturing, nanoMan 2016, Macau, China,. Macau, China: Institute of Physics Publishing, 5, 2016, CD-ROM.

Frerichs, F., Lübben, T. 2016.
Distortion of grooved steel cylinders due to high speed quenching. Int. Conf. on Heat Treatment and Surface Engineering in Automotive Applications, Prague, Czech Republic,. Čerčany: Asociace pro tepelné zpracování kov ů, 2016, auf CD. ISBN: 9788090446298.

Zoch, H.-W., Schulz, A., Nadolski, D. 2016.
Distortion Potential of Cold Forming Prior to Induction Heat Treatment Processes. 23rd IFHTSE Congress, Savannah, Georgia, USA,. Red Hook, NY: Curran Associates, Inc., 2016, 345-351. ISBN: 9781510823709.

Geilert, P., Kolkwitz, B., Eckebrecht, J., Heinzel, C. 2016.
Einfluss der Kühlschmierstoffzufuhrbedingungen auf die Energieeffizienz und die Leistungsfähigkeit von Schleifprozessen. Schweizer Schleif-Symposium, Zürich, Schweiz,. Zürich, Schweiz: ETH Zürich, Konferenzband 1., 2016, 1-8.

Riemer, O., Elsner-Dörge, F. 2016.
Forces and Form Deviations in Micro-Milling of CoCr Alloys for Dental Prostheses. The 5Th International Conference on Nano-manufacturing (nanoMan 2016), Macao, China,. Macao, China: Institute of Physics Publishing, 2016, CD-ROM.

Riemer, O., Schönemann, L., Dörgeloh, T. 2016.
Advancing Ultra Precision Machining to High Performance. AOMATT, Suzhou, China,. Bellingham, Wash., Bellingham, Washington, USA: SPIE, 2016, CD-ROM. ISBN: 9781628419177.

Riemer, O., Willert, M., Wolf, A. 2016.
Correlation of Process Loads and Surface Integrity in Precision Cutting. The 5th Int. Conf. on Nanomanufacturing (nanoMan 2016), Macau, China,. Macau, China: Institute of Physics Publishing, 2016, CD-ROM.

Said Schicchi, D., Hoffmann, F., Hunkel, M., Lübben, T. 2016.
Investigation of the mesoscale behavior of heterogenous steels concerning fracture initiation. European Conference on Heat Treatment 2016 3rd Int. Conf. on Heat Treatment and Surface Engineering in Automotive Applications, Prag, Tschechische Republik,. Prag, Tschechische Republik: Asociace pro tepelné zpracování kov ů, 2016, CD-ROM. ISBN: 9788090446298.

Greiff, S., Kronz, A., Schlütter, F., Prange, M. 2016.
Tagungsband der Jahrestagung Archäometrie und Denkmalpflege.. Metalla. 8 (2016), 2016, ISBN: 0947-6229.

Said Schicchi, D., Lin, M., Prahl, U., Hunkel, M. 2016.
A combined finite element - phase field model approach on the bainitic transformation.. Proc. 3rd Int. Conf. on Heat Treatment and Surface Engineering in Automotive Applications, Prag, Tschechische Republik,. Čerčany: Asociace pro tepelné zpracování kov ů, 2016, CD-ROM. ISBN: 9788090446298.

Sander, S., Fritsching, U. 2016.
Dynamische integrale Prozessmodellierung von Elektroabscheidern. Tagungsband Jahrestreffen der ProcessNet-Fachgruppen Agglomerations- und Schüttguttechnik, Computational Fluid Dynamics und Mehrphasenströmungen, Bingen, Deutschland,. Bingen, Deutschland: VDI, 2016,

Sander, S., Tischler, C., Henein, H., Fritsching, U. 2016.
PVP Particle Production via Electrospray Atomization. ILASS – Europe 2016 - 27th Annual Conf. on Liquid Atomization and Spray Systems, Brighton, UK,. Brighton, UK: Institute for Liquid Atomization and Spray Systems, 2016, 1-7.

Hasselbruch, H., Herrmann, M., Mehner, A., Kuhfuss, B., Zoch, H.-W 2016.
Incremental dry forging – Interaction of W-DLC coatings and surface structures for rotary swaging tools. Proc. Manufacturing, Stellenbosch, Südafrika,. Stellenbosch, Südafrika: 2016,

Heck, U., Becker, M., Riefler, N., Fritsching, U. 2016.
Micro-macroscopic modelling based on computational fluid dynamics (CFD). FILTECH 2016 Conference, Köln, Deutschland,. Meerbusch: Filtech Exhibitions Germany GmbH & Co KG, 2016, CD-ROM. ISBN: 3941655116 9783941655119.

Aycil, H., Hlawatsch, F., Kropp, J. 2016.
Hochwertige Verwertungsmöglichkeiten für Porenbeton rezyklate. Tagungsband Recycling R’16, Weimar,. Weimar: 2016, 1-15. OPEN ACCESS

Schnurbusch, G., Riemer, O., Brinksmeier, E. 2016.
Experimental Investigation of Material Removal Mechanisms of Sintered Ceramics by Scratch Tests. 16th International Euspen Conference, Nottingham, UK,. Bedford, UK: Euspen, 2016, 413-414. ISBN: 9780956679086. OPEN ACCESS

Hlawatsch, F., Aycil, H., Kropp, J. 2016.
Hochwertige Verwertungswege für Porenbetonbruch in Mörteln und Leichtsteinen für Mauerwerk. Mineralische Nebenprodukte und Abfälle 3, Neuruppin,. Karl J. Thomé-Kozmiensky, Hrsg. Neuruppin: TK Verlag, 2016, 433-453. ISBN: 978-3-944310-28-2. OPEN ACCESS

Schönemann, L. 2016.
Herstellung und Nachbearbeitung kubischer Retroreflektoren. Retroreflektoren in der Fahrzeugbeleuchtung, Nürnberg,. Nürnberg: bayern photonics-Innovationsnetz Optische Technologien, 2016, CD-ROM.

Schönemann, L. 2016.
Diamond Micro Chiseling of discontinuous optical microstructures. User Meeting 2016, Stuttgart,. Stuttgart: OPTIS GmbH, 2016, CD-ROM.

Berger, D., Riemer, O., Brinksmeier, E. 2016.
Precision Grinding of Spherical Lenses with Engineered Grinding Wheels. EUSPEN 2015 - 15th Int. Conf. for Precision Engineering & Nanotechnology, Leuven, Belgium,. R. Leach, Hrsg. Leuven, Belgium: Euspen, 2016, 89-90. ISBN: 978-0-9566790-7-9.

Hunkel, M., Nadolski, D. 2016.
Wärmebehandlungssimulation von Wellen aus 20MnCr5 unter Berücksichtigung von Effekten aus der Kaltmassivumformung. Simulationsforum 2016 – Schweißen und Wärmebehandlung, Weimar,. Hildebrand, J., Loose, T., Reich, M., Hrsg. Weimar, Deutschland: 2016, 213-239. ISBN: 9783000548055.

Böhmermann, F., Riemer, O. 2016.
Tool Life Criteria for the Machining of Tungsten Carbide with Geometrically De-fined Cutting Edge. The 5th International Conference on Nanomanufacturing (nanoMan2016), Macau, China,. Macau, China: Institute of Physics Publishing, 5, 2016, CD-ROM.

Böhmermann, F., Riemer, O. 2016.
Micro Machining of Tungsten Carbide with Geometrically Defined Cutting Edge. 16th Internatioal Euspen Conference, Nottingham, UK,. Bedford, UK: Euspen, 2016, 239-240. ISBN: 9780956679086.

Schumacher, J., Clausen, B. 2016.
Fatigue strength and dimensional stability of die cast specimens made of the alloy AlSi9Cu3(Fe). Aluminium 2016 Conference, Düsseldorf,. Düsseldorf: GDA - Gesamtverband der Aluminiumindustrie e.V., 2016, 4.1-4.19.

Brinksmeier, E. 2016.
Generation of Predictable Surface Integrity of Machined Components. International Conference on Competitive Manufacturing : COMA '16, Stellenbosch, South Africa,. Dimitrov, D., Oosthuizen, T., Hrsg. Stellenbosch, South Africa: Global Competitiveness Centre in Engineering, Department of Industrial Engineering, Stellenbosch University, 2016, 7-10. ISBN: 9780797216020.

Brinksmeier, E., Riemer, O., Flosky, C. 2016.
Ultra-Precision Grinding of Ceramics with Injection Moulded Tools. 16th International Euspen Conference, Nottingham, UK,. Bedford, UK: Euspen, 2016, 247-248. ISBN: 9780956679086.

Klümper-Westkamp, H., Zoch, H.-W., Bauerdick, C., Junge, F., Abele, E. 2016.
Energy and media efficient nitriding and nitrocarburising. 3th Mediterran. Conf. on Heat Treatment and Surface Engineering, Portoroz, Slowenien,. Leskov šek, V., Smoljan, B., Pellizzari, M., Podgornik, B., Sedlac ˇek, B., Hrsg. Ljubljana: Slovenian Society for Heat Treatment, 2016, CD-ROM. ISBN: 9789619251898.

Steinbacher, M., Hoffmann, F., Zoch, H.-W. 2015.
Thermochemische Wärmebehandlung von Wälzlagern und Zahnrädern für „smart Material“ Eigenschaften der Randschicht. 5. Kongress zur Getriebeproduktion (GETPRO), Würzburg, 25.-26.03.2015. Würzburg: FVA, 2015, 181-193.

Surm, H., Hunkel, M., Lübben, T. 2015.
Identificaation of Design Related Distortion of Gear Base Bodies by Finite Element. IDE 2015 - 5th International Conference on Distortion Engineering, Bremen, Germany,. Zoch, H.-W., Lübben, T., Hrsg. Bremen: IWT Bremen, 2015, 71-83. ISBN: 978-3-88722-749-4.

Langstädtler, L., Schönemann, L., Bloem, A., Schenck, C., Kuhfuss, B. 2015.
Replication of Prismatic Microstructures by Electromagnetic Embossing. Proceedings of the 4M/ICOMM2015 Conference, Milan, Italy,. Singapore: Research Publishing, 2015, CD-ROM. DOI: 10.3850/978-981-09-4609-8_054. ISBN: 9789810946098 9789810946449.

Cui, C;, Schulz, A.;, Moumi, E.;, Kuhfuß, B.;, Böhmermann, F. 2015.
Graded tool steel for micro rotary swaging via co-spray forming. 8th International Conference and Exhibition on Design and Production of Machines And Dies/Molds, Ku șadasi , T urkey,. Ankara, Ankara, Turkey: MATIM, Mechanical Design and Production Society, Metal Forming Center of Excellence, At ılım University, 2015, 191-198. ISBN: 9789756707524.

Cui, C., Schulz, A., Moumi, E., Kuhfuss, B., Böhmermann, F. 2015.
Graded Too Steel for Micro Rotary Swaging via Co-Spray Forming. 8th International Conference and Exhi-bition on Design and Production of Ma-chines and Dies/Molds, Kusadasi, Aydin, Turkey,. Ankara, Ankara, Turkey: MATIM, Mechanical Design and Production Society, Metal Forming Center of Excellence, At ılım University, 8, 2015, 191-198. ISBN: 9789756707524.

Londershausen, T., Schmidt, E., Sander, U., Fritsching, U. 2015.
Characterization of dustiness – Influence of low pressure. FILTECH - International Conference & Exhibition for Filtration and Separation Technology, Köln, Deutschland,. Meerbusch: Filtech Exhibitions Germany, 2015, ISBN: 978-3-94165-510-2 9783941655096.

Wächter Dias, V., Zottis, J., da Silva Rocha, A., Dong, J., Epp, J. 2015.
Analysis of the Bending Distortion of Automotive Shafts Manufactured from Cold Drawn. IDE 2015, 5th International Conference on Distortion Engineering, Bremen, 23.-25.09.2015. Zoch, H.-W., Lübben, T., Hrsg. Bremen: Wiley-VCH, 2015, 3-13. ISBN: 978-3-88722-749-4.

Lübben, T., Frerichs, F. 2015.
Process windows for shell hardening of unalloyed steel cylinders due to high speed quenching. Proc. Europ. Conf. on Heat Treatment & 22nd IFHTSE, Venedig, Italien,. Venedig, Italien: AIM – Associazione Italiana di Metallurgia 2015, 2015, 1-10.

Waldeck, S., Fritsching, U. 2015.
Untersuchung der Intensivkühlung heißer Metalloberflächen mittels Wasserstrahlen. ProcessNet, Jahrestreffen der Fachgruppen Trocknungstechnik und Wärme- und Stoffübertragung, Leipzig,. Leipzig: IWT, 2015, CD-ROM. OPEN ACCESS

Lübben, T., Surm, H., Hoffmann, F., Zoch, H.-W. 2015.
Identification of design related distortion of gear base bodies by experimental investigations. IDE 2015, Proc. 5th Int. Conf. on Distortion Engineering, Bremen,. Bremen: Wiley-VCH, 2015, 59-69. ISBN: 978-3-88722-749-4.

Wang, H., Riemer, O., Brinksmeier, E. 2015.
Theoretical study on the critical chip thickness in microcutting CaF2 single crystals with crystal plasticity finite element method. 15th International Conference for Precision Engineering & Nanotechnology, Leuven, Belgien,. Leach, R., Hrsg. Bedford: Euspen, 2015, 337-338. ISBN: 978-0-9566790-7-9. OPEN ACCESS

Willert, M., Riemer, O. 2015.
Surface Roughness of Precision Turned Hardened Steel. 15th International Conference & Exhibition of the European Society for Precision Engineering & Nanotechnology, Leuven, Belgium,. Bedford: euspen, 2015, 381-382. ISBN: 9780956679079.

Epp, J. 2015.
In situ X-ray diffraction investigations of phase transformation and phase specific density evolution during quenching of low alloy steels. 5th International Conference on Distortion Engineering, Bremen,. Bremen: IWT Bremen, 2015, 335-344. ISBN: 978-3-88722-749-4.

Wolfrath, T., Frerichs, F., Lübben, T. 2015.
Influence of Oil and Polymer Quenching on the Distortion of Thin Walled Bearing Rings. European Conference on Heat Treatment 2015 & 22nd IFHTSE congress, Venice, Italy,. Milano: AIM - Associazione Italiana di Metallurgia, 2015, CD-ROM. ISBN: 9788898990030.

Meyer, D., Redetzky, M., Kämmler, J. 2015.
The Potential of Cryogenic Deep-Rolling for Producing Near-Optical Surfaces. 15th International Conference & Exhibition of the European Society for Precision En-gineering & Nanotechnology, Leuven, Belgium,. Leuven, Belgium: euspen, 2015, 21-22. ISBN: 9780956679079.

Frerichs, F., Lübben, T., Zoch, H. W. 2015.
Interrelationship of strains and distortion of rectangular formed prisms. IDE 2015, 5th International Conference on Distortion Engineering, Bremen, 23.-25.09.2015. Zoch, H.-W., Lübben, T., Hrsg. Bremen: Wiley-VCH, 2015, 129-140. ISBN: 978-3-88722-749-4.

Ossenkemper, S., Haase, M., Tekkaya A. E., Nadolski, D., Schulz, A., Hoffmann, F., Zoch, H.-W. 2015.
Cold Forging and Heat Treatment Induced Distortion. 48th International Cold Forging Group (ICFG) Plenary Meeting, Daejeon, Südkorea,. Daejeon, Südkorea: JAP SOC TECHNAL OF PLASTICITY, 2015, 14-19.

Piotrowska-Kurczewskia, I., Vehmeyer, J., Gralla, P., Böhmermann, F., Elsner-Dörge, F., Riemer, O., Maaß, P. 2015.
Reduzierung der Formabweichung beim Mikrofräsen. Kolloquium Mikroproduktion, Aachen,. Aachen: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der Rheinisch-Westfälischen Technischen Hochschule (RWTH) Aachen, 1, 2015, 24-30. ISBN: ISBN 978-3-00-050-755-7.

Fritsching, U., Lampa, A. 2015.
Droplet Clustering in Spray Processes. ICLASS 2015 - 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan,. Naples, Italy: ILASS-Europe, 2015,

Quagliotti, D., Tosello, G., Islam, A. M., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C., Riemer, O. 2015.
A method for dimensional and surface optical measurements uncertainty assessment on micro structured surfaces manufactured by μECM. 4M/ICOMM 2015, Milan, Italy,. Singapore: Research Publishing, 2015, ISBN: 978-981-09-4644-9 9789810946098.

Quagliotti, D., Tosello, G., Islam, A. M., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Carla Brandao, C., Riemer, O. 2015.
Optical micro-metrology of structured surfaces micro-machined by jet-ECM. EUSPEN 2015, Proc. 15th Int. Conf. for Precision Engineering & Nanotechnology, Leuven, Belgien,. Leuven, Belgien: Euspen, 2015, CD-ROM. ISBN: 978-0-9566790-7-9. OPEN ACCESS

Redetzky, M., Rabenstein, A., Seidel, B., Brinksmeier, E. 2015.
The Lubrication of Microbial Cells and their Biopolymers. Tagungsband 5. WGP-Jahreskongress, Hamburg, Deutschland,. Wulfsberg, J. P., Röhling, B., Montag, T., Hrsg. Hamburg, Deutschland: Trans Tech Publications Ltd., 2015, 285-293. ISBN: 978-3-03835-616-5.

Rentsch, R. 2015.
Numerical analysis about the induction heating related distortion input in forging gear blanks. IDE 2015, Proc. 5th Int. Conf. on Distortion Engineering, Bremen,. Bremen: Wiley-VCH, 2015, 27-36. ISBN: 978-3-88722-749-4. OPEN ACCESS

Riemer, O., Schönemann, L., Dörgeloh, T., Beinhauer, A., Foremny, E., Brinksmeier, E., Kuhfuß, B. 2015.
Balancing concepts for high speed aerostatic spindles. 30th ASPE Annual Meeting, Austin, Texas/USA,. Raleigh, NC: American Society for Precision Engineering, 2015, 273-274. ISBN: 9781887706698. OPEN ACCESS

Saddei, P., Steinbacher, M., Hoffmann, F., Zoch, H.-W. 2015.
New case hardening processes for highly stressed gears. 6th International Conference on Gears 2015, München, Deutschland,. Düsseldorf: VDI Verlag, 2015, 997-1007. ISBN: 978-3-18-092255-3.

Grittner, N., Striewe, B., von Hehl, A., Klose, C., Schaper, M. 2015.
Co-extrusion of asymmetric aluminum-titanium compo- site profiles. MEFORM 2015 - International Conference on Light Metals – Forming Technologies and Further Processing, Freiberg, Deutschland,. Kawalla, R., Hrsg. Freiberg, Deutschland: 2015, CD-ROM.

Sander, S., Fritsching, U., Londershausen, T., Schmidt, E. 2015.
Numerical simulation of geometry influence on electrostatic precipitators. FILTECH - International Conference & Exhibition for Filtration and Separation Technology, Köln, Deutschland,. Meerbusch: Filtech Exhibitions Germany, 2015, ISBN: 978-3-94165-510-2 9783941655096.

Schicchi, D. S., Hunkel, M. 2015.
Transformation Plasticity Effect during Bainite Transformation on a 22MnB5 Steel Grade. IDE 2015, Proc. 5th Int. Conf. on Distortion Engineering, Bremen, 23.-25.09.2015. Zoch, H.-W., Lübben, Th., Hrsg. Weinheim: Wiley-VCH, 2015, 299-308. ISBN: 978-3-88722-749-4. OPEN ACCESS

Gulpak, M., Sölter, J. 2015.
Development of a Hybrid Model for the Prediction of Shape Deviations in Milling. 5th Int. Conf. on Distortion Engineering IDE 2015, Bremen,. Zoch, H.-W.;, Lübben, T., Hrsg. Bremen: IWT, Bremen, 2015, 161-169. ISBN: 978-3-88722-749-4.

Alisch, N., Epp, J. 2015.
Detection of surface property modifications in a damaged bearing ring by means of micromagnetic and X-ray diffraction methods. 11th Int. Conference on Barkahusen Noise and Micromagnetic Tesing (ICBM11), Kusadasi, Turkey,. Stiftung Institut für Werkstofftechnik, Hrsg. Kusadasi, Turkey: Stresstech, 2015, 1-9. ISBN: 9789526724799.

Aycil, H., Kropp, J. 2015.
Scale up des Porenbetonrecyclings. 19. Int. Baustofftagung (Ibausil), Weimar,. Weimar: F.A. Finger-Institut für Baustoffkunde, Bauhaus-Universität Weimar, 2015, 361-368. ISBN: 978-3-00-050225-5.

Schnurbusch, G., Riemer, O. 2015.
Application of single-grain scratch tests for analysing the removal mechanisms and surface properties of brittle materials. EUSPEN 2015 - 15th International Conference for Precision Engineering & Nanotechnology, Leuven, Belgien,. Leach, R., Hrsg. Leuven, Belgien: Euspen, 2015, 347-348. ISBN: 978-0-9566790-7-9.

Schönemann, L. 2015.
Ultra-Präzisionsbearbeitung auf dem Weg zur industriellen Fertigung. Fertigungstechnisches Kolloquium. Ultra-Präzisionsbearbeitung auf dem Weg zur industriellen Fertigung., Zürich, 12.11.2015. Zürich: Universität Bremen, 2015, CD-ROM.

Schönemann, L. 2015.
Herausforderungen der ultrapräzisen Hochgeschwindigkeitsbearbeitung. Fertigungstechnisches Kolloquium Ultra-Präzisionsbearbeitung auf dem Weg zur industriellen Fertigung, Zürich, Schweiz, 12.11.2015. Zürich, Schweiz: 2015, 1-35.

Hunkel, M., Nadolski, D. 2015.
Coupled Process Simulation of Cold Extrusion and Heat Treatment Distortion of Steel Shafts. IDE 2015, Proc. 5th Int. Conf. on Distortion Engineering, Bremen,. Bremen: Wiley-VCH, 2015, 15-25. ISBN: 978-3-88722-749-4.

Hunkel, M., Nadolski, D. 2015.
Through Process Simulation of Cold Extrusion and Heat Treatment Distortion of Steel Shafts. IDE 2015, 5th International Conference on Distortion Engineering, Bremen, Germany,. Zoch, H. W., Lübben, T., Hrsg. Bremen: IWT Bremen, 2015, 15-25. ISBN: 978-3-88722-749-4.

Schönemann, L., Mejia, P., Riemer, O., Brinksmeier, E. 2015.
Design and evaluation of a thermal actuator for ultra-precision machining. LAMDAMAP 2015, Proc. 11th Int. Conf. and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, Huddersfield, United Kingdom,. Bedfordshire: euspen, 2015, 320-330. ISBN: 978-0-9566790-5-5.

Böhmermann, F., Riemer, O. 2015.
Tribological Performance of Micro Struc-tured Surfaces Generated by Micro Milling. euspen’s 15th International Conference & Exhibition, Leuven, Belgium,. Leuven, Belgium: euspen, 15, 2015, 305-306. ISBN: 978-0-9566790-7-9.

Schulz, J., Meyer, D., Schultalbers, M. 2015.
Vertiefende Untersuchungen zu Verschleißschutzadditiven und deren Wechselwirkungen mit Metalloberflächen. 56. Tribologie-Fachtagung, Göttingen, Deutschland,. Aachen: Gesellschaft für Tribologie, 37, 2015, 1-10. ISBN: 9783981745108.

Klaiber, M., Simon, S., Guhathakurta, J., Li, W., Wang, Z., Lampa, A., Fritsching, U. 2015.
A High-Speed Process Monitoring System to Detect and Analyze Filaments and Droplet Collisions in Spray Processes in Real Time. ICLASS 2015 - 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan,. Naples, Italy: ILASS-Europe, 2015,

Klemz, A. C., Ramlow, H., Gonçalves, W. G. de M., Noriler, D., Meier, H. F., Fritsching, U. 2015.
Análise Da Atomização Giratória Em Reatores De Spray Flamenjante Por Técnicas De Cfd.. COBEQ 2014, Proc. Anais do XX Congresso Brasileiro de Engenharia Química, São Paulo, Brasilien,. São Paulo, Brasilien: Blucher Chemical Engineering Proceedings 1, 2015, 11763-11770. DOI: 10.5151/chemeng-cobeq2014-0816-23591-159995. OPEN ACCESS

Brinksmeier, E., Preuß, W., Riemer, O., Rentsch, R. 2015.
Ultraprecision high speed cutting. 30th ASPE Annual Meeting, Austin, Texas/USA,. Raleigh, NC: ASPE - American Society for Precision, 2015, CD-ROM. ISBN: 978-1-887706-69-8.

Sölter, J., Eckebrecht, J., Kolkwitz, B., Heinzel, C. 2015.
Analysis of the distortion and compensation potential in grind-hardening of linear guides. IDE 2015 - 5th International Conference on Distortion Engineering, Bremen, Germany,. Zoch, H.-W., Lübben, T., Hrsg. Bremen: IWT Bremen, 2015, 171-180. ISBN: 978-3-88722-749-4.

Kovac, J., Mehner, A., Köhler, B., Clausen, C., Zoch, H.-W. 2015.
Einfluss der Substratqualität und Wärmebehandlung auf die mechanischen Eigenschaften von magnetron-gesputterten TWIP-Stahl-Folien. Tagung 7. Koll. Mikroproduktion, Aachen,. Aachen: BIAS Verlag, 2015, 55-63.

Bucquet, T., Fritsching, U. 2015.
Flow conditioning in heat treatment jet and gas quenching. IDE 2015, 5th International Conference on Distortion Engineering, Bremen, 23.-25.10.2015. Zoch, H.-W., Lübben, T., Hrsg. Weinheim: Wiley-VCH, 2015, 203-214. ISBN: 978-3-88722-749-4.

Bucquet, T., Fritsching, U. 2015.
Cooling strategies in the forging process chain. NEMU 2015 - International Conference on New Developments in Forging Technology, Fellbach, Deutschland,. Liewald, M., Hrsg. Bonn: INVENTUM GmbH, 2015, 143-152. ISBN: 978-3-88355-409-9.

Bucquet, T., Gulpak, M., Wagner, A., Fritsching, U. 2015.
High-Strength Steel Bainitizing using Controlled In-Situ Gas Quenching within Machining Process. 28th ASM Heat Treating Conference and Exposition, Detroit, USA,. Materials Park, OH, USA: ASM International, 2015, 469-474. ISBN: 978-1-62708-105-4.

Bucquet, T., Fritsching, U. 2015.
Heat treatment strategies in the hot forging process chain. NEMU 2015 International Conference New Developments in Forging Technology, Stuttgart,. Bonn, Germany: INVENTUM GmbH, 2015, CD-ROM. ISBN: 9783883554099. OPEN ACCESS

Buss, L., Meierhofer, F., Achelis, L., Hodapp, M. J., Noriler, D., Meier, H. F., Fritsching, U. 2014.
Influence of Geometric Nozzle and Process Conditions on the Spray Behavior in a Double Swirl Atomizer. ILASS – Europe 2014, 26th Annual Conference on Liquid Atomization and Spray Systems, Bremen,. Achelis, Lydia; Fritsching, Udo, Hrsg. Bremen: ILASS – Europe, Institute for Liquid Atomization and Spray Systems, 2014, 1-12. DOI: 10.13140/2.1.2568.2248. OPEN ACCESS

Uhlenwinkel, V., Ellendt, N., Lehmann, R., Naujoks, M., Bentz, H. 2014.
High Temperature Drop-on-Demand System. 2014 World Confress on Powder Metallurgy and Particulate Materials (PM2014), Orlando, Florida,. Princeton: Metal Powder Industries Federation, 2014, CD-ROM. ISBN: 978-0-9853397-6-0.

Uhlenwinkel, V., Schwenck, D., Ellendt, N. 2014.
Gas recirculation affects powder quality. 2014 World Confress on Powder Metallurgy and Particulate Materials (PM2014), Orlando, USA,. Princeton: Metal Powder Industries Federation, 2014, CD-ROM. ISBN: 978-0-9853397-6-0.

Ramlow, H., Klemz, A. C., Gonçalves, W. G. de M., Noriler, D., Meier, H. F., Fritsching, U. 2014.
Análise Da Interação Entre Chamas Em Reatores De Spray Flamenjante Por Técnicas De Cfd. COBEQ 2014, Proc. Anais do XX Congresso Brasileiro de Engenharia Química, São Paulo, Brasilien,. São Paulo, Brasilien: Blucher Chemical Engineering Proceedings 1, 2014, 11763-11770. DOI: 10.5151/chemeng-cobeq2014-0816-23591-159995. OPEN ACCESS

Fritsching, U., Stark, P. 2014.
Flow boiling heat transfer in impinging liquid jet flows. ILASS – Europe 2014, 26th Annual Conference on Liquid Atomization and Spray Systems, Bremen,. Achelis, Lydia; Fritsching, Udo, Hrsg. Bremen, Germany: ILASS – Europe Institute for Liquid Atomization and Spray Systems, 2014, CD-ROM. DOI: 10.13140/2.1.4415.5206. ISBN: 9783000470707. OPEN ACCESS

Heinzel, C., Meyer, D., Kolkwitz, B., Redetzky, M. 2014.
Gezielte Randzonenbeeinflussung durch Fertigungsprozesse. 3rd ICMC 2014 / 3rd eniPROD-Colloquium, Part 1: Innovations of Sustainable Production for Green Mobility / Energy-Efficient Technologies in Productions, Chemnitz,. Prof. Dr.-lng. habil. Prof. E. h. Dr. -lng. Eh Dr. h c. Reimund Neugebauer, PD Dr.-lng. Welf-Guntram Drossel, Hrsg. Auerbach, Germany: Wissenschaftliche Scripten, 80, 2014, 495-512. ISBN: 978-3-95735-004-6.

Hodapp, M. J., Buss, L., Noriler, D., Meier, H. F., Meierhofer, F., Achelis, L., Fritsching, U. 2014.
Simulation of combusting spray generated by swirl atomizer. ILASS – Europe 2014, 26th Annual Conference on Liquid Atomization and Spray Systems, Bremen,. Achelis, Lydia; Fritsching, Udo, Hrsg. Bremen: ILASS – Europe Institute for Liquid Atomization and Spray Systems, 2014, CD-ROM. DOI: 10.13140/2.1.4141.0881. ISBN: 9783000470707. OPEN ACCESS

Schönemann, L., Palmowski, B., Brinksmeier, E. 2014.
Ultraprecision machining of nickel silver alloys. 4th International Conference on Nanomanufacturing, Bremen, 8.-10.07.2014. Bremen: IWT, 2014, CD-ROM.

Bucquet, T., Sander, S., Fritsching, U. 2014.
Characterization of Spray Nozzles for Quenching of Metal Components. ILASS – Europe 2014, 26th Annual Conference on Liquid Atomization and Spray Systems, Bremen,. Achelis, Lydia; Fritsching, Udo, Hrsg. Bremen: ILASS – Europe, Institute for Liquid Atomization and Spray Systems, 2014, CD-ROM. DOI: 10.13140/2.1.3629.0881. OPEN ACCESS

Cava, R. D., Uhlenwinkel, V., Ellendt, N., Santos, R.F.M., Kiminami, C. S., Bolfarini, C. 2013.
Spray Forming of Iron Based Fe43.2Co28.8B19.2Si4.8Nb4 Glass Forming Alloy. International Conference on Spray Deposition and Melt Atomization, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 5, 2013, 1-18. ISBN: 978-3-88722-740-1.

Lampa, A., Fritsching, U. 2013.
Spray structure and propagation in confined atomization processes. SDMA 2013, Bremen,. Uhlenwinkel, V., Fritsching, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 1-14. ISBN: 978-3-88722-740-1.

Ciftci, N., Ellendt, N., von Bargen, R., Henein, H., Mädler, L., Uhlenwinkel, V. 2013.
Characterization of a {(Fe0.6Co0.4)0.75B0.2Si0.05}96Nb4 glassy powder atomized by different atomization techniques. International Conference on Spray Deposition and Melt Atomization, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 1-14. ISBN: 978-3-88722-740-1. OPEN ACCESS

Thiemann, P., Geilert, P., Wagner, A. 2013.
Schleifbrand - Ansätze zur Erkennung und Vermeidung beim Verzahnungsschleifen. Kongress zur Getriebeproduktion der For-schungsvereinigung Antriebstechnik, Würzburg,. Würzburg: FVA Verlag Frankfurt a. M, 2013, CD-ROM.

Cui, C., Schulz, A., Achelis, L., Uhlenwinkel, V., Leopold, H., Piwek, V., Tang, Z., Seefeld, T. 2013.
Development of low-melting-point filler materials for laser beam brazing of aluminum alloys. 5th International Conference on Spray Deposition and Melt Atomization, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 1-12. ISBN: 978-3-88722-740-1.

Li, X., Fritsching, U. 2013.
Modeling of Ceramic Particle Penetration into Metallic Droplet in Spray Process. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 18. ISBN: 9783887227401.

Trojahn, W., Schulz, A., Meyer, C., Uhlenwinkel, V. 2013.
Bearing steels with high cleanliness produced by spray forming. SDMA, 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, CD-ROM. ISBN: 978-3-88722-740-1.

Li, X., Sander, S., Ellendt, N., Achelis, L., Fritsching, U. 2013.
Coupled Simulation of Spray Process for Metal Matrix Composite Powder Production. ILASS 2013 : 25th European Conference Liquid Atomization & Spray Systems, Chania Crete, September 1st-4th. Chania: ILASS – Europe Institute for Liquid Atomization and Spray Systems, 2013, 1-12. ISBN: 9789607365309.

Cui, C., Schulz, A., Uhlenwinkel, V. 2013.
Development of graded tool steels via spray forming for micro cold forming. 5th International Conference on Spray Deposition and Melt Atomization3, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, CD-ROM. ISBN: 978-3-88722-740-1.

Wagner, A., Kolkwitz, B. 2013.
Schleifhärten von Verzahnungen. Kongress zur Getriebeproduktion der Forschungsvereinigung Antriebstechnik, Würzburg,. Frankfurt, Main: FVA Verlag Frankfurt a. M, 2013, 174-187.

Ellendt, N., Uhlenwinkel, V., Mädler, L. 2013.
High Yield Spray Forming of Small Diameter Tubes using Pressure-Gas-Atomization. 5th International Conference on Spray Deposition and Melt Atomization, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 12. ISBN: 978-3-88722-740-1.

Meierhofer, F., Achelis, L., Buss, L., Noriler, D., Meier, H. F., Fritsching, U. 2013.
Investigation of Atomization Concepts for Large-scale Nanoparticle Production by Flame Spray Pyrolysis (FSP). SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 13. ISBN: 9783887227401.

Meyer, C., Ellendt, N., Mädler, L., Carter, W. T., Uhlenwinkel, V. 2013.
Spray forming of rings with a twin atomizer. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 5, 2013, CD-ROM. ISBN: 9783887227401.

Meyer, C., Ellendt, N., Mädler, L., Müller, H. R., Reimer, F., Uhlenwinkel, V. 2013.
Spray forming of high density sheets. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, CD-ROM. ISBN: 9783887227401.

Pascon, F., Brauner, C., Hasselbruch, H., Krieger, H., Bruyneel, M 2013.
Finite Element Analysis of the Thermo-Forming Process of Thermoplastic Composite Parts. NAFEMS World Congress, Salzburg, Austria,. Bernau am Chiemsee: NAFEMS Deutschland, Österreich, Schweiz GmbH, 2013, CD-ROM. OPEN ACCESS

Grohmann, O., Meyer, Ch., Schulz, A., Uhlenwinkel, V., Heinzel, C. 2013.
Hot Forming tool Generated via Co-Spray Forming of Composite Material. 5th International Conference on Spray Deposition and Melt Atomization, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 1-9. ISBN: 978-3-88722-740-1.

Guerra, A.P.B., Ellendt, N., Uhlenwinkel, V., Bolfarini, C. 2013.
Microstructure of an 7050 alloy processed by spray forming followed by hot extrusion and rotary swaging. 5th International Conference on Spray Deposition and Melt Atomization, Bremen,. Bremen, Germany: Universität Bremen, 2013, 1-9. ISBN: 978-3-88722-740-1.

Guerra, A.P.B., Ellendt, N., Uhlenwinkel, V., Silva, P.S.C.P., Bolfarini, C. 2013.
Microstructure of a recycled AA7050 alloy processed by spray forming followed by hot extrusion and rotary swaging. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 9. ISBN: 978-3-88722-740-1.

Schönemann, L., Brandao, C., Riemer, O. 2013.
Micro and ultra precision machining for micro injection molding applications. Conference: 3rd MicroNano Moulding ATV-SEMAPP Seminar, Kopenhagen, Denmark,. Kopenhagen, Denmark: 2013, CD-ROM.

Brinksmeier, E., Klocke, F., Schönemann, L. 2013.
Replication of Complex Optics. 3rd EOS Conference on Manufacturing of Optical Components (EOSMOC), München,. Red Hook, NY: Curran Associates, Inc., 2013, 2. ISBN: 9781510810464.

Schwenck, D., Ellendt, N., Fischer-Bühner, J., Hofmann, P., Mädler, L., Uhlenwinkel, V. 2013.
Effect of Process Parameters on Powder Quality. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, 1-12. ISBN: 978-3-88722-740-1.

Schwenck, D., Ellendt, N., Mädler, L., Fischer-Buehner, J., Hofmann, P., Uhlenwinkel, V. 2013.
Generation of small batch high quality metal powder. European Congress and Exhibition on Powder Metallurgy: Powder Manufacturing, Gothenburg, Sweden, 15.-18.09.2013. Gothenburg, Sweden: 2013, 1-7.

Srivastava, V. C., Ellendt, N., Meyer, C., Uhlenwinkel, V. 2013.
Synthesis of bulk amorphous and nano-crystalline materials by spray forming. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, CD-ROM. ISBN: 9783887227401.

Srivastava, V. C., Huttunen-Saarivirta, E., Cui, C., Uhlenwinkel, V., Schulz, A., Mukhopadhyay, N. K. 2013.
Development of bulk quasicrystalline materials by spray forming. SDMA 2013, Bremen,. Uhlenwinkel, V., Frichting, U., Ellendt, N., Mädler, L., Hrsg. Bremen: Universität Bremen, 2013, CD-ROM. ISBN: 9783887227401.

Ding, Y., Li, L., Krause, A., Riemer, O. 2012.
Frequency Response Prediction of Spindle-Workpiece Assemblies for Ultra-Precision Diamond Turning Based on Substructure Analysis. 12th International Conference of the European Society for Precision Engineering and Nanotechnology, Stockholm, Sweden,. Bedford: euspen, 1, 2012, 415-418. ISBN: 9780956679000.

Drusch, S., Fritsching, U. 2012.
Sprays, Techniken der Fluidzerstäubung und Untersuchungen von Sprühvorgängen. Spray 2012 - 10. Workshop über Sprays, Techniken der Fluidzerstäubung und Untersuchungen von Sprühvorgängen, Berlin,. Drusch, S., Fritsching, Udo, Hrsg. Berlin: Technische Universität Berlin, 2012, CD-ROM. OPEN ACCESS

Fritsching, U., Beneke, F. 2012.
Energie- und Ressourceneffizienz in der Wärmebehandlung und Thermoprozesstechnik. AWT-VDMA Seminar „Energie- und Ressourceneffizienz“, Bremen,. Fritsching, Udo; Beneke, Franz, Hrsg. Bremen: Institut für Werkstofftechnik (IWT), 2012, CD-ROM. OPEN ACCESS

Achelis, L., Sulatycki, K., Uhlenwinkel, V., Mädler, L. 2012.
Spray Angle and Particle Size in the Pressure Gas Atomization of Tin and Tin-Copper Alloys. PM2010 World Congress – Gas Atomized Powders. Shrewsbury: European Powder Matallurgy Association, 1, 2012, 1-9. ISBN: 9781899072149.

Schönemann, L., Brinksmeier, E., Gläbe, R. 2012.
Diamond micro chiseling of prismatic microstructures. 22.-23.03.2012. 2012, 1-16.

Böhmermann, F., Liu, K., Riemer, O. 2012.
Manufacture of Mold Inserts with Microme-ter Sized Features Using Ultra Precision Machining (UPM). 12th International Conference of the Euro-pean Society for Precision Engineering and Nanotechnology, Stockholm, Sweden,. Stockholm, Sweden: euspen, 2, 2012, 262-265.

Brinksmeier, E., Gläbe, R., Schönemann, L., Meier, A. 2012.
Mechanical Patterning of Optical Microstructures. ASPE 2012 Summer Topical Meeting, Bremen,. University of Bremen, LFM – Laboratory for Precision Machining, Hrsg. Raleigh: American Society for Precision Engineering (ASPE), 2012, CD-ROM. ISBN: 978-1-88770-660-5.

Brinksmeier, E., Riemer, O., Schönemann, L. 2012.
Modeling of errors for machining of discontinuous microstructures. euspen topical meeting "Structured and Freeform Surfaces", Teddington, UK,. University of Bremen, LFM – Laboratory for Precision Machining, Hrsg. Teddington, UK: euspen, 2012, CD-ROM.

Koch, T., Rabenstein, A. 2012.
Metalworking Fluids Microbiology: New Developments for Monitoring and Suvereillance. 18th International Colloquium Tribology, Esslingen,. Bartz, W. J., Hrsg. Ostfildern, Germany: Technische Akademie Esslingen, 2012, 10.

Brinksmeier, E., Riemer, O., Schönemann, L. 2012.
Ultraprecision mold manufacture for micro injection molded micro optics. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando, Florida, USA,. Brookfield: Society of Petroleum Engineers, 3, 2012, 1-4. ISBN: 9781622760831.

Blank T., Wohlfeld, D., Lemke, F., Brüning, U., Twardy, S., Riemer, O. 2011.
Automatisierung der Fertigungstechnik für hochintegrierte 12x aktive optische Kabel. MikroSystemTechnik Kongress, Darmstadt,. Darmstadt: VDE VERLAG, 2011, CD-ROM. ISBN: 978-3-8007-3367-5.

Lütjens, J., Surm, H., Hunkel, M., Gafsi, H., Renken, V., Schüttenberg, S. 2011.
Compensation of roundness deviations of bearing rings by heat treatment. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September 2011. Zoch, H.-W., Hrsg. Bremen, Germany: WILEY‐VCH Verlag, 2011, 63-72. ISBN: 978-3-88722-724-1.

Eisbrecher, I., Clausen, B., Hunkel, M., Rentsch, R. 2011.
Anisotropies and inhomogeneities in the microstructure of the case hardening steel SAE 5120. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September 2011. Zoch, H.-W., Hrsg. Bremen: WILEY‐VCH Verlag, 2011, 135-143. DOI: 10.1002/mawe.201100892. ISBN: 978-3-88722-724-1.

Frerichs, F., Lübben, T., Hoffmann, F., Zoch, H.-W. 2011.
Ring geometry as an important part of distortion potential. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September, 2011. Zoch, H.-W., Hrsg. Bremen, Germany: WILEY‐VCH Verlag, 2011, 3-12. ISBN: 3887227247 978-3-88722-724-1.

Moumi, E., Doll, R., Schulz, A., Twardy, S., Kuhfuß, B., Partes, K., Riemer, O., Vollertsen, F. 2011.
Investigations on two Alternative Methods for Manufacturing Micro Forming Tools. 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey,. Ankara, Turkey: ATILIM University, 2011, 63-70. ISBN: 9789756707296.

Mutlugünes, Y., Riemer, O. 2011.
Precision Grinding of SF57 Glass with En-gineered Grinding Wheels. 11th International Conference of the European Society for Precision Engineering & Nanotechnology, Como, Italy,. Bedford: Euspen, 2, 2011, 325-328. ISBN: 9780955308291.

Rath, J., Lübben, T., Frerichs, F., Hunkel, M., Hoffmann, F., Zoch, H.-W., Juretzko, H., Heeß, K., Streng, T. 2011.
Comparison of different straightening strategies in press quenching of large rings by simulation. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September 2011. Zoch, H.-W., Hrsg. Bremen, Germany: WILEY‐VCH Verlag, 2011, 33-42. ISBN: 978-3-88722-724-1.

Hagendorf, O., Pawletta, T., Larek, R. 2011.
Meta-Model based Estimation of optimal System Variants with MATLAB/Simulink. 5. ASIM-Workshop – Modellierung, Rege-lung und Simulation in Automotive und Prozessautomation, Wismar,. Wismar: ARGESIM Verlag Wien, 2011, 12. ISBN: 978-3-901608-36-0.

Schönemann, L., Brinksmeier, E., Gläbe, R. 2011.
CAD/CAM tool for discontinuous microstructuring processes. 2011, 1.

Hunkel, M. 2011.
Modelling of phase transformations and transformation plasticity of a continuous casted steel 20MnCr5 incorporating segregations. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September, 2011. Zoch, H.-W., Hrsg. Bremen, Germany: WILEY‐VCH Verlag, 2011, 399-409. ISBN: 978-3-88722-724-1.

Kemmler, J., Pokhrel, S., Mädler, L., Barsan, N., Weimar, U. 2011.
Metastable In4Sn3O12 in Sensor Application. 10. Dresdner Sensor-Symposium 2011, Dresden, 05.12-07.12.2011. Dresden: AMA Association for Sensor Technology e.V., 2011, 1-4. DOI: https://doi.org/10.5162/10dss2011/12.11. ISBN: 978-3942710-53-4.

Brinksmeier, E., Brandao, C., Gläbe, R., Schönemann, L. 2011.
Micro Grinding Technologies. 11th euspen International Conference, Como, Italy,. University of Bremen, LFM – Laboratory for Precision Machining, Hrsg. Como, Italy: euspen, 2011, 4.

Schüttenberg, S., Lütjens, J., Hunkel, M., Fritsching, U. 2011.
Adapted spray quenching for distortion control. 3rd International Conference on Distortion Engineering 2011, Bremen,. Zoch, H.-W., Hrsg. Bremen, Germany: Institut für Werkstofftechnik IWT, 2011, 533-540. ISBN: 978-3-88722-724-1.

Simsir, S., Hunkel, M., Lütjens, J., Rentsch, R. 2011.
Process-chain simulation for prediction of the distortion of case-hardened gear blanks. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September, 2011. Zoch, H.-W., Hrsg. Bremen, Germany: Institut für Werkstofftechnik IWT, 2011, 437-446. ISBN: 978-3-88722-724-1.

Stark, P., Fritsching, U., Hunkel, M., Hansmann, D. 2011.
Process integrated distortion compensation of large bearing rings. 3rd International Conference on Distortion Engineering 2011, Bremen, 14.-16. September, 2011. Zoch, H.-W., Hrsg. Bremen, Germany: Stiftung Institut für Werkstofftechnik IWT, 3, 2011, 259-266. ISBN: 978-3-88722-724-1 3887227247.

Frerichs, F., Lübben, T., Hoffmann, F., Zoch, H.-W 2010.
Effects of Inhomogeneous Distribution of Distortion Potential on Out of Roundness of Rings. 4th International Conference on Thermal Process Modeling and Computer Simulation, Shanghai, China, 31. May - 02. June, 2010. Shanghai, China: International Federation for Heat Treatment and Surface Engineering, 2010, CD-ROM.

Gutheil. E., Fritsching, U. 2010.
9. Workshop über Sprays, Techniken der Fluidzerstäubung und Untersuchungen von Sprühvorgängen. 9. Workshop über Sprays, Techniken der Fluidzerstäubung und Untersuchungen von Sprühvorgängen, Heidelberg,. Gutheil. E. Fritsching, U., Hrsg. Heidelberg: Universität Heidelberg, Universität Bremen, 2010, 316. OPEN ACCESS

Achelis, L., Sulatycki, K., Uhlenwinkel, V., Mädler, L. 2010.
Spray Angle and Particle Size in the Pressure Gas Atomization of Tin and Tin-Copper Alloys. World powder metallurgy congress; 2010, Florence, Italy, 10.-14.10.2010. Shrewsbury: European Powder Matallurgy Association, 2010, 1-9. ISBN: 9781899072101, 9781899072118.

Hagendorf, O., Pawletta, T., Deatcu, C., Larek, R. 2010.
An Approach for Combined Simulation Based Parameter and Structure Optimization Using Evolutionary Algorithms. 7th EUROSM 2010 Congress, Prague, Czech Republic,. Prague, Czech Republic: Elsevier, 2, 2010, 10.

Arnold, B., Burger, H., Drott, U., Hahn, O., Kaun, S., Laue, S., Noll-Minor, M., Raue, J., Schlütter, F., Ziemann, M. 2010.
Pigmentveränderungen – Verschwärzung von Bleizinngelb. Tagung des Arbeitskreises Archäometrie und Denkmalpflege der GDCH, Bochum,. Bochum: 2010,

Arnold, B., Burger, H., Drott, U., Hahn, O., Kaun, S., Laue, S., Noll-Minor, M., Raue, J., Schlütter, F., Ziemann, M. 2010.
Pigmentveränderungen - Verblassen von Mennige. Tagung des Arbeitskreises Archäometrie und Denkmalpflege der GDCH, Bochum,. Bochum: 2010,

Schlütter, F., Kaiser, W., Juling, H. 2010.
High-fired gypsum mortar - a material for screeds, stucco and masonry repair on historic monuments. Production, properties and sample applications. 2nd HISTORIC MORTAR CONFERENCE & RILEM 203 RHM - Repair mortars for historic masonry. 2010,

Schönemann, L., Brinksmeier, E., Flucke, C., Gläbe, R. 2010.
Tool-Development for Diamond Micro Chiseling. euspen International Conference, Delft, The Netherlands, 31.05.-04.06.2010. LFM – Laboratory for Precision Machining, University of Bremen, Germany, Hrsg. Bedford: European Society for Precision Engineering and Nanotechnology, 2010, CD-ROM. ISBN: 9780955308284.

Jakubek, M., Schlütter, F., Oberta, W., Łukaszewicz, J. W . 2010.
Medieval gypsum mortars as a material of architectonic details from the castle of the Teutonic Order in Torun, Poland. 2nd Conference on Historic Mortars-HMC 2010 and RILEM TC 203-RHM final workshop. RILEM Publications SARL, 2010, 227-237.

Karsten, O., Grote, C., Schimanski, K., Hehl, Axel von, Zoch, H.-W. 2010.
Optimized Processing for Distortion Control in Milling of Al-Zn-Mg Alloys. 12th International Conference on Alu-minium Alloys, Yokohama, Japan,. Yokohama, Japan: The Japan Institute of Light Metals, 2010, 1261-1266. OPEN ACCESS

Brinksmeier, E., Schönemann, L., Gläbe, R. 2010.
Review on Diamond-Machining Processes for the Generation of Functional Surface Structures. 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, 24.-26.10.2010. Aoyama, T., Takeuchi, Y., Hrsg. Gifu, Japan: 2010, 1-6. ISBN: 4915698025 9784915698026.

Stelling, O., Ellendt, N., Uhlenwinkel, V., von Hehl, A., Krug, P., Zoch, H. W. 2009.
Coarsening of spray formed aluminium alloys with high Mg2Sicontent during subsequent processing. SDMA 2009, ICSF VII, Bremen,. Bremen: Universität Bremen, 2009, 1-7. ISBN: 978-3-88722-710-4.

Cui, C., Schulz, A., Uhlenwinkel, V., Zobel, F., Zoch, H. W. 2009.
Spray forming of stainless steel matrix composites with injection of hard particulates. International Conference on Spray Deposition and Melt Atomization, ICSF, 7th International Conference on Spray Forming, Bremen,. Bremen: Wiley-VCH, 2009, 1-12. ISBN: 0933-5137.

Ellendt, N., Stelling, O., Uhlenwinkel, V., von Hehl, A., Krug, P. 2009.
Influence of spray forming process parameters on the microstructure and porosity of Mg2Si rich aluminum alloys. International Conference on Spray Deposition and Melt Atomization, Bremen,. Bremen: Universität Bremen, 2009, 1-10. ISBN: 978-3-88722-710-4.

Zhu, B., Xiong, B., Zhang, Y., Wang, F., Li, Z., Liu, H., Fritsching, U., Zhang, J. 2009.
Precipitate Behavior and Microstructure Characterization of An Al-Zn-Mg-Cu Alloy Prepared by Spray Forming Process. SDMA 2009, ICSF VII, Bremen,. Bremen: Univeristy of Bremen, 2009, CD-ROM. ISBN: 978-3-88722-710-4.

Piotrowska, I., Maass, P., Riemer, O., Twardy, S. 2009.
Flexible Herstellung von tribologisch opti-mierten Mikroumformwerkzeugen. 4. Kolloquium Mikroproduktion, Bremen,. Vollertsen, F., Büttgenbach, S., Kraft, O., Michaeli, W., Hrsg. Bremen: BIAS Verlag, 2009, 281-286. OPEN ACCESS

Gao, S., Frichting, U. 2009.
Droplet Collisions in Overlapping Melt Sprays. SDMA 2009, ICSF VII, Bremen,. Bremen: Universität Bremen, 2009, 11. ISBN: 978-3-88722-710-4.

Gläbe, R., Flucke, C., Schönemann, L., Lünemann, B., Brinksmeier, E. 2009.
Diamond Machining Technologies for Novel Optical Structures. EOS Conferences at the World of Photonics Congress, München,. Hannover, Germany: EOS, 2009, CD-ROM. ISBN: 978-3-00-024190-1.

Gläbe, R., Schönemann, L., Lünemann, B., Schotten, A., Brinksmeier, E. 2009.
Two Novel Diamond Machining Technologies for Machining New Types of Optical Structures. International Conference on Leading Edge Manufacturing in 21st century : LEM21, Osaka, Japan, 2.-4.12.2009. Tokyo: The Japan Society of Mechanical Engineers, 5, 2009, 409-412. DOI: 10.1299/jsmelem.2009.5.409. OPEN ACCESS

Achelis, L., Uhlenwinkel, V., Ristau, R., Krug, P. 2009.
Transient temperatures and microstructure of spray formed aluminium alloy AlSi sheets. SDMA 2009, ICSF VII, Bremen,. Bremen: WILEY-VCH, 2009, 11.

Aycil, H., Schlütter, F., Kropp, J. 2009.
Neue Verwertungswege für Stahlwerksschlacken: Entwicklung von hydrothermal gehärteten Bauprodukten. Internationale Baustofftagung (ibausil), Weimar, 23.-26.09.2009. Weimar: 13, 2009,

Schlütter, F., Ziemann, M., Juling, H. 2009.
Discolouration of pigments in historic mural paintings - microscopic analysis. Euroseminar on Microscopy Applied to Building Materials, Dortmund, 15.-19. 09. 2009. Dortmund: 12, 2009,

Baiqing, X., Feng, W., Yongan, Zh., Baohong, Zh., Hongwei, L., Zhihui, L., Yuting, Z., Jishan, Zh., Fritsching, U. 2009.
On the microstructures of spray-deposited and homogenized Al-Zn-Mg-Cu alloys. SDMA 2009, ICSF VII, Bremen,. Bremen: WILEY-VCH, 2009, 4.

Schönemann, L., Brinksmeier, E., Osmer, J. 2009.
A piezo-driven adaptive tool holder for ultraprecision diamond tool alignment. 9th euspen International Conference, San Sebastian, Spain,. LFM - Laboratory for Precision Machining, University of Bremen, Hrsg. Bedford: Euspen, 2009, 398-401. ISBN: 9780955308260.

Schönemann, L., Flucke, C., Osmer, J., Lünemann, B., Riemer, O., Brinksmeier, E. 2009.
Scaling in Machining of Optics from Reflective to Diffractive Function. 9th euspen International Conference, San Sebastian, Spain,. Bedford: Euspen, 2009, 17-20. ISBN: 978-0-9553082-6-0.

Schulz, A., Cui, C., Uhlenwinkel, V., Buschenhenke, F., Seefeld, T., Vollertsen, F., Zoch, H. W. 2009.
Spray forming of hypereutectic Al-Si filler materials for welding high strength aluminum alloys. SDMA 2009, ICSF VII, Bremen,. Bremen: Universität Bremen, 2009, CD-ROM. ISBN: 978-3-88722-710-4.

Schumacher, J., Bomas, H., Zoch, H. W. 2009.
Microstructure and mechanical properties of sulphur-alloyed spray-formed steels. SDMA 2009, ICSF VII, Bremen,. Bremen: Universität Bremen, 2009, CD-ROM. ISBN: 978-3-88722-710-4.

Srivastava, V. C., Surreddi, K. B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Eckert, J., Rosenauer, A., Zoch, H. W. 2009.
Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. SDMA 2009, ICSF VII, Bremen,. Bremen: Universität Bremen, 2009, CD-ROM. ISBN: 978-3-88722-710-4.

Stelling, O., Ellendt, N., Uhlenwinkel, V., von Hehl, A., Keßler, O., Zoch, H.W. 2008.
Influence of content, distribution and size of Mg2Si-precipitates on properties of spray formed aluminum alloys. Proc. 11th Int. Conf. on Aluminum Alloys-ICAA 2008, Aachen,. Weinheim: Wiley-VCH, 2008, 1-6. ISBN: 978-3-527-32367-8.

Clausen, B., Frerichs, F., Klein, D., Kohlhoff, T., Lübben, T., Prinz, Ch., Rentsch, R., Sölter, J., Stöbener, D., Surm, H. 2008.
Identification of process parameters affect-ing distortion of disks for gear manufacture - Part II: heating, carburizing, quenching. 2nd International Conference on Distortion Engineering, Bremen,. Bremen: Wiley-VCH, 2008, 41-50.

Clausen, B., Frerichs, F., Klein, D., Kohlhoff, T., Lübben, T., Prinz, Ch., Rentsch, R., Sölter, J., Stöbener, D., Surm, H. 2008.
Identification of process parameters affect-ing distortion of disks for gear manufacture - Part I: casting, forming and machining. 2nd International Conference on Distortion Engineering, Bremen,. Bremen: Wiley-VCH, 2008, 29-39.

Ellendt, N., Uhlenwinkel, V., Ahmetovic, A., Boddez, L., Henein, H. 2008.
Quality of Sn-Ag powders produced by drop-on-demand technique. Proc. PM2008, 8.-12. June 2008, Washington, DC,. Princeton, N.J.: Metal Powder Industries Federation, 2008, CD-ROM. ISBN: 9780979348891 0979348897. OPEN ACCESS

McHugh, K. M., Uhlenwinkel, V., Ellendt, N. 2008.
Density of sprayformed materials. 2008 World Congress on Powder Metallurgy & Particulate Materials, Washington, USA,. Princeton, NJ: Metal Powder Industries Fed., 2008, CD-ROM. ISBN: 0979348897 9780979348891.

Schönemann, L., Lünemann, B., Gläbe, R., Brinksmeier, E., Falldorf, C., von Kopylow, C. 2008.
Design and application of an open loop nanometerstroke Fast Tool Servo system for the generation of diffractive optical elements. Adaptronic Congress, Berlin,. LFM - Labor für Mikrozerspanung, University of Bremen, BIAS – Bremer Institut für angewandte Strahltechnik, Hrsg. Göttingen: Adaptronic Congress Veranstaltungs GbR, 2008, 1-5.

Juling, H., Franzen, C. 2008.
Salzschäden an Kulturgütern : Stand des Wissens und Forschungsdefizite ; Ergebnisse des DBU Workshops im Februar 2008. DBU-Workshop Salzschäden an Kulturgütern, Osnabrück,. Osnabrück: Schwarz, H-J. Steiger, M., 2008, 52-59. ISBN: 978-3-00-028965-1.

Kurt, O., Fritsching, U., Schulte, G. 2007.
Binäre Kollision von Tropfen mit fluiden und Suspensions-Partikeln. Fachtagung "Lasermethoden in der Strömungsmesstechnik", Rostock, Deutschland,. Rostock: Universität, Fakultät für Maschinenbau und Schiffstechnik, 2007, 8. ISBN: 9783860090077.

Kurt, O., Fritsching, U., Schulte, G. 2007.
Binary Collisions of Droplets with Fluid and Suspension Droplets. ILASS Europe Meeting 2007, Mugla, Turkey,. Mugla, Turkey: 2007, 6.

Larek, R., Soehner, C. 2007.
Factory planning and production management in a concurrent engineering environment. Proceedings of the International Conference on Applied Production Technology, APT’07, Bremen,. Bremen: Production of Aircraft Structures, APT, International Conference on Applied Production Technology, 2007, 209-217. ISBN: 978-3-933762-21-4.

Uhlenwinkel, V., Ellendt, N., Schulz, A., Stelling, O., Zoch, H.-W. 2007.
Optimierung der Dichte sprühkompaktierter Werkstoffe in Pulvermetallurgie für hochpräzise Bauteile und dichte Hochleistungswerkstoffe. 26. Hagener Symposium, 29.-30.11.2007, 2007, S. 159-172., Baltimore, USA,. H. Kolaska, Hrsg. Baden-Baden: Heimdall Verlag, Rheine, 23, 2007, 159-172. ISBN: ISSN: 0173-9913.

Uhlenwinkel, V., Ellendt, N., Stelling, O., Keßler, O. 2007.
Spray Forming of Al-Mg-Si-Alloy with High Volume of Mg2Si. TMS 2007 136th Annual Meeting & Exhibition, Materials Processing and Manufacturing Division, Orlando, USA,. Warrendale, Pa: TMS, 2007, 53-60.

Decker, R.K., Meier, H.F., Mori, M., Fritsching, U. 2007.
Particle Interaction with Coherent Structures in a Two-Phase Jet. ICMF 2007 -Int. Conf. Multiphase Flow, Leipzig, Germany,. Leipzig: SOC POWDER TECHNOL JAPAN, 2007, 11. ISBN: 9783860109137.

Maass, P., Kuhfuß, B., Riemer, O. 2007.
Mathematische Modelle zur tribologischen Optimierung von Zerspanprozessen. Kolloquium Mikroproduktion – Fortschritte, Verfahren, Anwendungen, Karlsruhe,. Kraft, O., Emmerich, u. B., Hrsg. Karlsruhe: Sonderforschungsbereich 747, 2007, 243-248. ISBN: 978-3-923704-61-3.

Ziemann, M., Schlütter, F., Laue, S., Fuchs, C. 2007.
Pigmentumwandlungen an den mittelalterlichen Wandmalereien der Bischofsresidenz Ziesar - Erste Untersuchungsergebnisse eines DBU-Projektes. Arbeitskreis Archäometrie und Denkmalpflege der GDCH, Potsdam, 21.09.2007. Potsdam: 2007,

Fritsching, U., Czisch, C., Schubert, L., H. Motz, Mudersbach, D., Kühn, M. 2007.
Faserfreie Zerstäubung von basischer Hochofenschlacke. FEhS – Report 2, Duisburg,. Duisburg: Institut für Baustoff-Forschung Duisburg, 14, 2007, 4-8. ISBN: 0948-4795.

Fritsching, U., Körich-Decker, R., Heinlein, J. 2007.
Droplet Structure Formation at the Spray Edge. ILASS Europe Meeting 2007, Mugla, Turkey,. Mugla, Turkey: 2007, 6.

Schlütter, F., Wagner, A. 2007.
Glazing - Mikroskopisch-analytischer Nachweis einer speziellen Lasurtechnik an den Wandmalereien der All Saints Church in Cambridge. Arbeitskreis Archäometrie und Denkmalpflege der GDCH, Potsdam, 21.09.2007. Potsdam: 2007,

Schmidt, R., Fritsching, U. 2007.
Multi-scale modelling and experimental validation of gas quenching processes. European Conference on Heat Treatment, Berlin, Germany,. Bremen: AWT, 2007, 85-93.

Scholler, M., Fritsching, U. 2007.
Jet Flow in a Rectangular Chamber. 26th International Conference of Fluid Dynamics and Thermodynamics Departments, Herbertov, Czech Republic,. Herbertov, Czech Republic: 2007, 6. ISBN: 80-86786-09-9.

Schüttenberg, S., Hunkel, H., Zoch, H.-W,, Fritsching, U. 2007.
Controlling of distortion by quenching in flexible fluid jet fields. European Conference on Heat Treatment, Berlin, Germany,. Bremen: 2007, 257-264.

Krause, F., Fritsching, U. 2007.
Modeling and Simulation of Boiling Heat Transfer in Quenching Applications. ICMF 2007 - Int. Conf. Multiphase Flow, Leipzig, Germany,. Leipzig: SOC POWDER TECHNOL JAPAN, 2007, 6. ISBN: 9783860109137.

Krause, F., Fritsching, U. 2007.
Influence of Incident Flow on Boiling Heat Transfer. 5th Short Course and Workshop "Multiphase Flow - Simulation, Experiment and Applications, Dresden, Germany,. Otterfing: ANSYS Germany, 2007,

Stelling, O., Keßler, O., Zoch, H. W., Ellendt, N., Uhlenwinkel, V. 2006.
New spray formed aluminum-copper alloys with high Mg2Si-content. SDMA 2006, ICSF VI, Bremen,. Bremen: Institute of Materials, 3, 2006, CD-ROM.

Cui, C., Schulz, A., Fritsching, U. 2006.
Spray-formed Homogeneous Steels of Low Distortion Potential. ICSF, International Conference on Spray Forming, 6, SDMA, International Conference on Spray Deposition and Melt Atomization, 3, Bremen,. Bremen: Institute of Materials, 2006, 1-12.

Cui, C., Schulz, A., Fritsching, U. 2006.
Spray Formed Honogeneous Steels of low Distortion Potential. SDMA 2006 - Spray Deposition and Melt Atomization Conference, Bremen, Germany,. Amsterdam: Elsevier, 2006, 12.

Czisch, C., Fritsching, U. 2006.
Nozzle Design for Viscous Melt Atomization. 6th International Conference on Spray Forming, 3rd International Conference on Spray Deposition and Melt Atomization, Bremen,. Amsterdam: Elsevier, 2006, 1-8.

Czisch, C., Fritsching, U. 2006.
Auslegung eines Hybridzerstäubers für hochviskose Fluide. SPRAY 2006, Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, Lampoldshausen, Deutschland,. Lampoldshausen, Deutschland: 2006, 12.

Decker, R.K., Fritsching, U., Meier, H.F., Mori, M. 2006.
Experimental Study of Particles Interactions with Large Scale Vortices in Two-Phase Jet. XXII Interamerican Congress of Chemical Engineering, Buenos Aires, Argentina,. Buenos Aires, Argentina: 2006, 18.

Ellendt, N., Uhlenwinkel, V., Stelling, O., Irretier, A., Kessler, O. 2006.
Spray forming of Mg2Si rich aluminum alloys. International Conference on Spray Deposition and Melt Atomization, Bremen,. Bremen: Universität Bremen, 2006, CD-ROM.

Mi, J., Grant, P., Fritsching, U., Belkessam, O., Garmendia, I., Landabarea, A. 2006.
Multiphysics Modelling of the Spray Forming Process. SDMA 2006- Spray Deposition and Melt Atomization Conference, Bremen, Germany,. Amsterdam: Elsevier, 2006, 12.

Minisandram, R. S., Forbes-Jones, R. M., Suthar, P. K., Carter, W. T., Uhlenwinkel, V., Ellendt, N. 2006.
Characterization of Spray in Nucleated Casting of Superalloys. International Conference on Spray Deposition and Melt Atomization, Bremen,. Bremen: Institute of Materials, 2006, 1-10.

Mulhem, B., Khoja, G., Fritsching, U., Schulte, G. 2006.
Break-up of hollow cone and flat suspension lamellae of pressure atomizers. Int. Conf. Liquid Atomization Spraying Systems ICLASS-2006, Kyoto, Japan,. Osaka: ILASS, 2006, 6.

Fritsching, U., Körich-Decker, R., Heinlein, J. 2006.
Tropfen-Cluster Diagnose in Sprays und Jets. Fachtagung „Lasermethoden in der Strömungsmesstechnik“ der Gesellschaft für angewandte Laser-Anemometrie, Braunschweig, Deutschland,. D. Dopheide, H. Müller, V. Strunck, B. Ruck, A. Leder, Hrsg. Karlsruhe: GALA, 2006, ISBN: 3-9805613-3-X.

Grimme, D., Rickens, K., Zhao, Q., Heinzel, C. 2006.
Dressing of Coarse-Grained Diamond Wheels for Ductile Machining of Brittle Materials. 11th International Conference on Precision Engineering (ICPE), Tokyo, Japan,. Tokyo, Japan: Springer London, 2006, 305-307. ISBN: 978-1-84628-558-5.

Schimanski, K., Schulz, A., Vetters, H., Zoch, H. W. 2006.
Optimisation of Al-Cu alloys by spray forming. SDMA 2006, ICSF VI, Bremen,. Bremen: Institute of Materials, 2006, CD-ROM.

Achelis, L., Uhlenwinkel, V. 2006.
Characterization of Metal Powders Generated by a Pressure-GasAtomizer. SDMA 2006, ICSF VI, Bremen,. Bremen: Institute of Materials, 2006, 11.

Heinlein, J., Fritsching, U. 2006.
Konzentrations-Inhomogenitäten in Sprays. SPRAY 2006, Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, Lampoldshausen, Deutschland,. Lampoldshausen, Deutschland: 2006, 8.

Hlawatsch, F., Schlütter, F, Kropp, J. 2006.
Autoklaves Härtungspotenzial und hydrothermale Reaktionsprozesse von Betonbrechsand. Internationale Baustofftagung (ibausil), Weimar, 20.-23.09.2006. Weimar: F.A. Finger Institut für Baustoffkunde u.a., 16, 2006,

Schulz, A., Uhlenwinkel, V., Escher, C., Kohlmann, R., Kulmburg, A., Montero, M. C., Rabitsch, R., Stocchi, D., Viale, D. 2006.
Opportunities and Challenges of Spray Forming High-alloyed Steels. SDMA 2006, ICSF VI, Bremen,. Bremen: Institute of Materials, 2006, CD-ROM.

Schüttenberg, S., Hunkel, M., Fritsching, U., Zoch, H.-W. 2006.
Controlled Quenching of Steel Parts in Fluid Jet Fields. 15th International Federation of Heat Treatment and Surface Modification Technologies Congress, Vienna, Austria,. Leoben: ASMET, 2006, 78-83. ISBN: 3901384197 9783901384196.

Srivastava, V. C., Jindal, V., Uhlenwinkel, V., Bauckhage, K. 2006.
Deformation Behavior of Spray Deposited 2014 Al-SiCP Composites. SDMA 2006, ICSF VI, Bremen,. Bremen: Institute of Materials, 2006, CD-ROM.

Cui, C., Schulz, A., Fritsching, U., Kohlmann, R. 2005.
Spray Forming of Homogeneous 20MnCr5 Steel of Low Distortion Potential. 1st International Conference on Distortion Engineering, Bremen, Germany,. Bremen: 2005, 84-94. ISBN: 3887226534.

Walter, A. 2005.
Zerspanung eisenhaltiger Werkstoffe bei Anwendung von Kühlschmierstoffen. Wirtschaftliches Zerspanung durch optimale Kühlschmierstoffe, Ostfildern, 24.-25.11.2005. Bartz, W. J., Hrsg. Ostfildern: TAE- Technische Akademie Esslingen, 2005, CD-ROM.

Walter, A. 2005.
Zerspanung von Titanlegierungen. Wirtschaftliches Zerspanung durch optimale Kühlschmierstoffe, Ostfildern, 24.-25.11.2005. Bartz, W. J., Hrsg. Ostfildern: Technische Akademie Esslingen, 2005, CD-ROM.

Walter, M., Stockinger, M., Tockner, J., Ellendt, N., Uhlenwinkel, V. 2005.
Spray forming and post processing of superalloy rings. Int. Conference on Continuous Casting of Non-ferrous Metals, Ulm, 14.-16.11.2005. Müller, H. R., Hrsg. Weinheim: DGM, Wiley, 2005, 429-440. DOI: 10.7449/2005/Superalloys_2005_429_440. ISBN: 9783527313419.

Mulhem, B., Fritsching, U. 2005.
Solid-liquid separation in suspension sprays. 20th ILASS Europe Meeting, Orleans, France,. Orléans: Laboratoire de Combustion et Systèmes Réactifs, CNRS [u.a.], 2005, 23-28.

Garmendia, I., Landabarea, A., Vicario, T., Fritsching, U., Belkessam, O., Grant, P., Mi, J. 2005.
A unified computer model of the spray forming process of Inconel 718 billets and rings. 6th Int. Superalloys Symposium, Pittsburgh, Pennsylvania,. Warrendale, PA: Minerals, Metals, and Materials Society, 2005, 441-452. ISBN: 9780873396028.

Gülker, G., El Jarad, A., Hinsch, K. D., Juling, H., Linnow, K., Steiger, M., Brüggerhoff, S., Kirchner, D. 2005.
Monitoring of deformations induced by crystal growth of salts in porous systems using microscopic speckle pattern interferometry. LASERS in The Conservation of Artworks (LACONA), Wien, 21.-26.09.2005. Wien: 2005,

Schmidt, R., Fritsching, U. 2005.
Homogenization of hardness distribution and distortion in high pressure gas quenching. 1st International Conference on Distortion Engineering, Bremen, Germany,. Bremen: 2005, 471-478. ISBN: 3-88722-653-4.

Heinlein, J., Fritsching, U., Schulte, G. 2005.
Erfassung und Bewertung von Konzentrations-Inhomogenitäten von Tropfenverteilungen in Sprays. Lasermethoden in der Strömungsmesstechnik, Cottbus,. Karlsruhe, Deutschland: GALA, 2005, CD-ROM. ISBN: 3-9805613-2-1. OPEN ACCESS

Schüttenberg, S., Hunkel, M., Fritsching, U., Zoch, H.-W. 2005.
Controlling of Distortion by means of Quenching in adapted Jet Fields. 1st International Conference on Distortion Engineering, Bremen, Germany,. Bremen: 2005, 389-396. ISBN: 3887226534.

Schüttenberg, S., Hunkel, M., Fritsching, U., Zoch, H.-W. 2005.
Distortion Compensation by Means of Quenching in Flexible Jet Fields. 23th ASM Heat Treating Society Conference, Pittsburgh, USA,. Materials Park: ASM International, 2005, 211-215. ISBN: 978-0-87170-832-8.

Brzoza, M., Specht, E., Ohland, J., Belkessam, O., Lübben, T., Fritsching, U. 2005.
Minimising Stress and Distortion for Shafts and Discs by Controlled Quenching in a Field of Nozzles. 1st International Conference on Distortion Engineering IDE 2005, Bremen, Germany,. Bremen: 2005, 397-404. ISBN: 3887226534.

Czisch, C., Fritsching, U., Bauckhage, K. 2004.
Prefilming Hybrid Atomization. 19th ILASS Europe, Nottingham, UK,. Nottingham: School of Chemical, Environmental and Mining Engineering, University of Nottingham, 2004, 463-468.

Czisch, C., Huang, Z., Lohner, H., Fritsching, U., Bauckhage, K. 2004.
Atomization of mineral melts with hot gas. Schriftenreihe Mechanische Verfahrenstechnik, Bd. 7, DFG-Schwerpunktprogramm “Fluidzer-stäubung”, Dortmund, Germany,. P. Walzel, C. Tropea, Hrsg. Aachen: Shaker Verlag, 2004, 10. ISBN: 3-8322-2570-6.

Walter, A. 2004.
Tribologische Vorgänge in Zerspanprozessen. 14th International Colloquium Tribology-Tribology and Lubrication Engineering, Ostfildern,. Ostfildern: Technische Akademie Esslingen, 2004, 47-58. ISBN: 3-924813-54-X.

Walter, A. 2004.
Einfluss von Kühlschmierstoffen auf die Spanbildung. 14th International Colloquium Tribology-Tribology and Lubrication Engineering, Ostfildern,. Ostfildern: Technische Akademie Esslingen, 2004, 813-823. ISBN: 3-924813-54-X.

Walter, A. 2004.
Einsatz von Kühlschmierstoffen bei der Zerspanung von Leichtmetallen. Technische Arbeitstagung Hohenheim, Hohenheim, 16.-18. März 2004. Berlin: UNITI-Mineralöltechnologie GmbH, 49, 2004, CD-ROM.

Eckebrecht, J. 2004.
Messung des Nebelverhaltens von Kühlschmierstoffen. 14th International Colloquium Tribology and Lubrication Engineering, Esslingen,. Esslingen: Technische Akademie Esslingen (TAE), 2004, 1-9. ISBN: 3-924813-54-X.

Markus, S., Fritsching, U. 2004.
Modelling and Direct Simulation of the Behaviour and Secondary Break-up of Melt Droplets in Atomization Processes. 5th International Conference on Multiphase Flow, ICMF’04, Yokohama, Japan,. Yokohama, Japan: ICMF, 432, 2004, 11.

Meyer, L., Walter, A., Wittmann, M. 2004.
Ganzheitliche Optimierung des Einsatzes von Kühlschmierstoffen in der Zerspanung. GFT-Tagung 2004, Moers,. Moers: Gesellschaft für Tribologie, 2004, 1-10. ISBN: 3-00-015053-6.

Ye, H., Fritsching, U., Bauckhage, K. 2004.
Dreidimensionale Simulation von Depositen beim Sprühkompaktieren. Kolloquium des SFB 372, Bremen, Deutschland,. K. Bauckhage, V. Uhlenwinkel, Hrsg. Norderstedt: Books on Demand, 7, 2004, 33 - 44. ISBN: 3-8334-2259-9 3-88722-508-2.

Ye, H., Fritsching, U., Bauckhage, K. 2004.
Evolution of the Top Surface Temperature of Spray Formed Billet. Powder Metallurgy World Congress & Exhibition PM2004, Vienna, Austria,. Bellstone, Shrewsbury: European Powder Metallurgy Association (EPMA), 2004, 25-31. ISBN: 1899072152.

Mulhem, B., Khoja, G., Fritsching, U., Bauckhage, K. 2004.
Photographic Observation of Break-up of Hollow Cone Suspension Sheet. 19th ILASS Europe, Nottingham, UK,. Nottingham: School of Chemical, Environmental and Mining Engineering, University of Nottingham, 2004, 451-456.

Mulhem, B., Schulte, G., Fritsching, U., Bauckhage, K. 2004.
Separation of particles from liquids within suspension atomization. PARTEC 2004, International Congress for Particle Technology, Nürnberg, Germany,. Nürnberg: NurnbergMesse GmbH, 2004, 4.

Fritsching, U., Cui, C., Huang, Z., Schulz, A. 2004.
Control of the Temperature Distribution in a billet during Spray Forming for minimizing Distortion Potential. Powder Metallurgy World Congress & Exhibition PM2004, Vienna, Austria,. Shrewsbury: European Powder Metallurgy Association (EPMA), 2004, 6. ISBN: 1899072152.

Fritsching, U., Heinlein, J. 2004.
Analysis of Single Point Particle Time Series for Detection of Particle Clustering. 3rd International Symposium of Two-Phase Flow Modelling and Experimentation, Pisa, Italy,. Pisa: Ed. ETS, 2004, 6. ISBN: 8846710754.

Fritsching, U., Huang, Z., Czisch, C., Markus, S. 2004.
Powder Production from Melts by Controlled Gas Atomisation. Powder Metallurgy World Congress & Exhibition PM2004, Vienna, Austria,. Bellstone, Shrewsbury: European Powder Metallurgy Association (EPMA), 2004, 65-70. ISBN: 1-899072-15-2.

Fritsching, U., Kühne, U. 2004.
Conveying and Dosage of Fine Solid Particles in an Ultrasound Agitated Tube Module. 5th International Conference on Multiphase Flow, ICMF’04, Yokohama, Japan,. Yokohama, Japan: ICMF, 519, 2004, 7.

Fritsching, U., Mulhem, B., Schulte, G., Bauckhage, K. 2004.
Solid-liquid Separation of Suspensions by Atomization in Twin-fluid Atomizers. 5th International Conference on Multiphase Flow, ICMF’04, Yokohama, Japan,. Yokohama, Japan: ICMF, 231, 2004, 10.

Heinlein, J., Fritsching, U. 2004.
Detection and evaluation of droplet concentration variations in sprays. Schriftenreihe Mechanische Verfahrenstechnik, Bd. 7, DFG-Schwerpunktprogramm “Fluidzer-stäubung, Dortmund, Germany,. P. Walzel, C. Tropea, Hrsg. Aachen: Shaker Verlag, 2004, 10. ISBN: 3-8322-2570-6.

Heinlein, J., Fritsching, U. 2004.
Droplet Clustering in Sprays. 19th ILASS Europe, Nottingham, UK,. Nottingham: School of Chemical, Environmental and Mining Engineering, University of Nottingham, 2004, 412-417.

Hunkel, M., Schüttenberg, S., Frerichs, F., Fritsching, U. 2004.
Verzugskompensation einfacher Bauteile mittels Gasabschreckung in flexiblen Düsenfeldern. Europ. Tagung „Härten und Abschrecken“, Straßburg, Frankreich,. Straßburg, Frankreich: ATTT/AWT, 2004, 10.

Juling, H., Kirchner, D., Bradler, M. 2004.
Mechanism of Sodium Sulphate Crystal Growth in the Deterioration of Sandstones: Some New Observations. International Congress on Deterioration and Conservation of Stone. Kwiatkowski, D. Löfvendahl, R., 10, 2004, 187-194.

Kühne, U., Fritsching, U., Bauckhage, K. 2003.
Conveying of micro- and nanoscale powders in tube modules. 4th International Conference For Conveying and Handling of Particulate Solids, Budapest, Hungary,. Budapest: ORTRA, 2003, 6.

Lagutkin, S., Achelis, L., Sheikhaliev, S., Uhlenwinkel, V., Srivastava, V. C. 2003.
Atomization Process for Metal Powder. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Amsterdam: Elsevier, 1, 2003, 2-51-2-58. ISBN: 3833005718.

Thoben, K.-D., Lübben, T., Clausen, B., Prinz, C., Schulz, A., Rentsch, R., Kusmierz, R., Nowag, L., Surm, H., Frerichs, F., Hunkel, M., Klein, D., Mayr, P. 2003.
Distortion Engineering: A System-Oriented View on the Distortion of Component-Parts. 4th International Conference on Quenching and the Control of Distortion, Beijing, China, 22.-25.11.2003. Beijing, China: ASM, 2003, CD-ROM.

Cui, C., Fritsching, U., Schulz, A., Bauckhage, K., Mayr, P. 2003.
Control of Cooling during Spray Forming of Bearing Steel Billet. 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen, Germany: Books on Demand GmbH, 2, 2003, 8-117-8-128. ISBN: 3833005718.

Cui, C., Fritsching, U., Schulz, A., Bauckhage, K., Mayr, P. 2003.
Spray Forming of Homogeneous Bearing Steel Billets using Twin Atomizer. European Powder Metallurgy Conference 2003, Valencia, Spain,. Shrewsbury: European Powder Metallurgy Association, 2003, 6. ISBN: 1899072179.

Uhlenwinkel, V., Achelis, L., Sheikhaliev, S., Lagutkine, S. 2003.
A new technique for molten metal atomization. International Conference on Liquid Atomization and Spray Systems. 9, 2003, 1-8.

Liu, Y., Chen, Z. 2003.
Numerical Simulation of Thermal History in Multistage Atomization. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Frichting, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Amsterdam: Elsevier, 1, 2003, 8-17-8-29. ISBN: 3833005718.

Liu, Y., Chen, Z. 2003.
Multistage Atomization Process And Mechanism. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Amsterdam: Elsevier, 1, 2003, 2-67-2-76. ISBN: 3833005718.

Lohner, H., Czisch, C., Fritsching, U. 2003.
Impact of Gas Nozzle Arrangement on the Flow Field of a Twin Fluid Atomizer with External Mixing. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, Sorrento, Italien,. Sorrento: 2003, 7. ISBN: 8888104038.

Uhlenwinkel, V., Rauscher, B., Ziesenis, J., Schulz, A., Anderson, I., Terpstra, R. 2003.
Initial Spray Deposition Trials with Close Coupled Atomization. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 1, 2003, 4-47-4-57.

Czisch, C., Lohner, H., Fritsching, U., Bauckhage, K. 2003.
Powder generation from melts with high viscosity. 27th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology (ACHEMA 2003), Frankfurt, Germany,. Frankfurt, Germany: DECHEMA, 2003, 1.

Czisch, C., Lohner, H., Fritsching, U., Bauckhage, K. 2003.
Powder generation from melts with high viscosity. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, Sorrento, Italien,. Sorrento: 2003, 8. ISBN: 8888104038.

Czisch, C., Lohner, H., Fritsching, U., Bauckhage, K., Edlinger, A. 2003.
Atomization of highly Viscous Melts. 2nd International Conference on Spray Deposition and Melt Atomization 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 1, 2003, 2-77-2-84. ISBN: 3-8330-0571-8.

Walter, A. 2003.
Bildung von Sorptions- und Reaktions-schichten durch KSS-Additive bei der Zer-spanung. Technische Arbeitstagung Hohenheim, Hohenheim, 18.-20. März 2003. Hamburg: Beratungsgesellschaft für Mineralöl-Anwendungstechnik GmbH, 48, 2003, CD-ROM. ISBN: ISSN 0341-1893.

Walter, A., Koch, T., Krogmeier, F. 2003.
Bohrungsbearbeitung von Verbundwerkstoffen aus CFK, Aluminium und Titan. 44. Tribologie-Fachtagung, Göttingen, 22.-24. September 2003. Moers: Gesellschaft für Tribologie e.v., 2, 2003, 51/1; 51/13. ISBN: 3-00-003404-8.

Markus, S., Fritsching, U. 2003.
Spray Forming with Multiple Atomisation. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Amsterdam: Elsevier, 2, 2003, 8-3- 8-16. ISBN: 3833005718.

Markus, S., Fritsching, U. 2003.
Modelling Secondary Breakup of Melts in Sprays. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, Sorrento, Italien,. Sorrento: 2003, 10. ISBN: 8888104038.

Ellendt, N., Schmidt, R., Knabe, J., Henein, H., Uhlenwinkel, V. 2003.
Spray Deposition using Impulse Atomization Technique. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 2, 2003, 6-15-6-26. ISBN: 3833005718.

Wendler, E., Arnold, B., Köhler, W., Krempler, M., Schlütter, F. 2003.
Materialeigenschaften und Konservierung von Raseneisenstein. Tagung Archäometrie und Denkmalpflege. Hahn, O., Goedicke, C., Fuchs, R., Horn, I., Hrsg. 2003, 20-22.

Minke, E., Giwerzew, A. 2003.
CD-Schleifen bei erhöhten Schnittgeschwindigkeiten. 1st European Conference on Grinding, 3. Schleiftechnisches Kolloquium, Aachen,. Werner, K., Klocke, F., Brinskmeier, E., Hrsg. Düsseldorf: VDI-Verlag, 642, 2003, 11-3; 11-20. ISBN: 3-18-364202-6.

Frerichs, F., Lübben, T., Fritsching, U., Lohner, H., Rocha, A., Löwisch, G., Hoffmann, F., Mayr, P. 2003.
Simulation of gas quenching. 2nd International Conference on Thermal Process Modelling and Computer Simulation, Nancy, France,. Les Ulis: EDP Sciences, 2003, 9. ISBN: 2868837859.

Ziesenis, J., Bauckhage, K. 2003.
Phase-Doppler-Anemometry: A Reliable Tool for Controlling the Spray Forming Process. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 2, 2003, 7-107-7-114.

Ziesenis, J., Bauckhage, K. 2003.
Towards the Energy Balance of the Spray Forming Process and the Importance of the Exhaust Gas Temperature. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 2, 2003, 8-29-8-42.

Mulhem, B., Fritsching, U., Schulte, G., Bauckhage, K. 2003.
Characterisation of Twin-Fluid Atomisation for Suspensions. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, Sorrento, Italien,. Sorrento: 2003, 9. ISBN: 8888104038.

Garbero, M., Fritsching, U., Vanni, M. 2003.
Influence of Spray Impingement on Gas-Surface Heat Transfer. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, Sorrento, Italien,. Sorrento: 2003, 10. ISBN: 8888104038.

Schimanski, K., Schulz, A., Vetters, H., Bauckhage, K., Mayr, P. 2003.
Extension of the Performance of Aluminium-Copper Alloys by Spray forming. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 2, 2003, 9-29-9-38. ISBN: 3833005718.

Schlütter, F., Herkner, S., Rehbaum, D., Juling, H. 2003.
Historische Silikatfarben am Königsbau der Residenz München - Nachweis und verwitterungsbedingte Veränderungen. Jahrestagung des Arbeitskreises „Archäometrie“ der Gesellschaft Deutscher Chemiker und des Arbeitskreises „Archäometrie und Denkmalpflege“ der Deutschen Mineralogischen Gesellschaft, Berlin, 12.-14.03.2003. Berlin: 2003, 17-19.

Bahnsen, C., Bomas, H., Garbrecht, M., Walter, A., Mayr, P. 2003.
Development of a spray deposition steel combining high strength and good machinability. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 1, 2003, 4-57-4-67. ISBN: 3833005718.

Schneider, A., Uhlenwinkel, V., Harig, H., Bauckhage, K. 2003.
Overspray Injection in Spray Forming of CuSn13.5 Billets. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 2, 2003, 6-39-6-50. ISBN: 3-8330-0571-8.

Herding, T., Keßler, O., Tempus, G., Hoffmann, F., Mayr, P. 2003.
Spray formed aluminium-magnesium-scandium alloys: microstructure and properties. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen, Germany: Elsevier, 1, 2003, 3-35-3-46. ISBN: 3833005718.

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlmann, R., Kulmburg,A., Oldewurtel, A., Schneider, R., Viale, D. 2003.
Nitrogen pick-up during spray forming of high alloyed steels and its influence on microstructure and properties of the final products. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen: Elsevier, 1, 2003, 4-31-4-46.

Brinksmeier, E., Walter, A., Rentsch, R., Sackmann, T. 2003.
Machining of a Spray-Formed Aluminum Alloy. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Amsterdam: Elsevier, 2, 2003, 9-3 9-14.

Krauss, M., Hua, Y., Cui, C., Fritsching, U. 2003.
Diagnostic of the mushy zone by on-line measurements and numerical simulations. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen, Germany: Elsevier, 2, 2003, 7-3-7-16.

Kresina, M., Schulte, G., Bauckhage, K. 2003.
Impact of Molten Metal Droplets on Non Solid Surfaces. 2nd International Conference on Spray Deposition and Melt Atomization and 5th International Conference on Spray Forming, Bremen,. Bauckhage, K., Fritsching, U., Uhlenwinkel, V., Ziesenis, J., Leatham, A., Hrsg. Bremen, Germany: Elsevier, 2, 2003, 8-101-8-108. ISBN: 3833005718.

Kühne, U., Fritsching, U., Bauckhage, K. 2002.
Förderung feindisperser Pulver. Tagungsband Innovative Energieträger in der Verfahrenstechnik, Leipzig, Deutschland,. Leipzig, Deutschland: 2002, 6.

Stock, H. R., Bengelsdorff, S., Grimme, D., Preuß, W. 2002.
Verbesserung der Fertigungstechnologie zum Abformen asphärischer Linsen, Poster. 75. Tagung des Wissenschaftlichen Rates der AiF - Zukunftstechnologien für den innovativen Mittelstand, Magdeburg, 28. - 29.11.2002. Magdeburg: Arbeitsgemeinschaft Industrieller Forschungsvereinigungen Otto von Guericke, 2002, CD-ROM.

Kurt, O., Mulhem, B., Fritsching, U., Schulte. G. 2002.
Zerstäubung von Suspensionen mittels eines Rotationszerstäubers. SPRAY 2002, Freiberg,. Obermeier, F., Hrsg. Freiberg: Technische Universitat Bergakademie Freiberg, 2002, 183-192. ISBN: 3860121855.

Cui, C., Meyer, O., Zöller, H., Fritsching, U., Schulz, A., Bauckhage, K., Mayr, P. 2002.
Production of Homogeneous Bearing Steel by Spray Forming. 2002 World Congress on Powder Metallurgy and Particulate Materials, Orlando, Florida,. Orlando, Florida: Metal Powder Industries Federation, 2002, 15. ISBN: 1878954903.

Lohner, H., Czisch, C., Fritsching, U., Bauckhage, K. 2002.
Zerstäuben viskoser Glas- und Mineralschmelzen mit Heißgas. Chemie Ingenieur Technik, Wiesbaden,. Wiesbaden: Wiley-VCH, 74, 2002, 568. DOI: 10.1002/1522-2640(200205). ISBN: ISSN: 0009-286X. OPEN ACCESS

Lohner, H., Fritsching, U., Bauckhage, K. 2002.
Melt Atomization by heated gases. ILASS-Europe, Zaragoza, Spanien,. Zaragoza, Spanien: ILASS Europe, Annual Conference on Liquid Atomization and Spray Systems, 2002, CD-ROM. ISBN: 84-95480-70-0. OPEN ACCESS

Walter, A. 2002.
Tribophysical and Tribochemical Reaction in Machining Processes. Proc. 13th International Colloquium in Tri-bology - Lubricants, Materials, and Lubrication Engineering, Esslingen, 15. - 17.01.2002. Ostfildern: Technische Akademie Esslingen (TAE), 2002, 231-236. ISBN: 3-924813-48-5.

Markus, S., Fritsching, U. 2002.
Instability Processes in Melt Atomization. 2002 World Congress on Powder Metallurgy and Particulate Materials, Orlando, Florida,. Orlando, Florida: Metal Powder Industries Federation, 2002, 13. ISBN: 1878954903.

Eckebrecht, J. 2002.
Kühlschmierstoff-Sicherheitsmanagement-System - ein interdisziplinäres Forschungsprojekt. 13th International Colloquium in Tribology - Lubricants, Materials, and Lubrication Engineering, Esslingen,. Ostfildern: Technische Akademie Esslingen (TAE), 2002, 1567-1576. ISBN: 3-924813-48-5.

Ziesenis, J., Bauckhage, K. 2002.
Monitoring the Spray Forming Process. Spray Forming, Bremen,. Uhlenwinkel, V., Ziesenis, J., Bauckhage, K., Hrsg. Bremen: Universität Bremen, 6, 2002, 111-127. ISBN: 3833000333.

Mulhem, B., Bauckhage, K., Fritsching, U., Schulte, G. 2002.
Beugungsspektrometrie in Sprays von Suspensionen: Modellexperimente und differenzierte Interpretation der Ergebnisse. 10. Fachtagung Lasermethoden in der Strömungsmeßtechnik, Rostock, Deutschland,. Rostock, Deutschland: Universität Rostock, 2002, 7. ISBN: 3860092332.

Mulhem, B., Fritsching, U., Schulte, G. 2002.
Einfluß der dispersen Feststoffphase auf den Lamellenzerfall von Suspensionen mit Newtonscher Trägerflüssigkeit. SPRAY 2002, Freiberg,. Obermeier, F., Hrsg. Freiberg: Technische Universitat Bergakademie Freiberg, 2002, 10. ISBN: 3860121855.

Fritsching, U., Kühne, U., Bauckhage, K. 2002.
Particle Transport in Small Tubes by Ultrasound. World Congress on Particle Technology 4, Sydney, Australia,. Sydney: 2002, 8. ISBN: 0858257947.

Fritsching, U., Mulhem, B., Schulte, G., Bauckhage, K. 2002.
Spray Characteristics in Liquid Atomization with Suspended Solid Particles. World Congress on Particle Technology, Sydney, Australia,. Sydney: 2002, 8. ISBN: 0858257947.

Garbrecht, M., Eckebrecht, J., Walter, A. 2002.
Einsatzpotenziale der Minimalmengenkühl-schmierung und Trockenbearbeitung. 10. Österreichische HSC-Tagung „Chancen und Möglichkeiten in der Hochgeschwin-digkeitsbearbeitung und Präzisionsbearbei-tung, Steyr, 26.-28.06.2002. Großraming: Resch, 2002, 1-30. ISBN: 3-9501603-0-2.

Haase, B., Dong, J., Walter, A. 2002.
Passivity of Steels Owing to Machining. 13th International Colloquium in Tribology - Lubricants, Materials, and Lubrication Engineering, Esslingen, 15. - 17.01.2002. Ostfildern: Technische Akademie Esslingen (TAE), 2002, 237-241. ISBN: 3-924813-48-5.

Schneider, A., Klein, R., Uhlenwinkel, V., Henein, H. 2002.
Investigation of Local Particle Mass Flux in a Jet Stream with an Isokinetic Probe. Spray Forming, Bremen,. Uhlenwinkel, V., Ziesenis, J., Bauckhage, K., Hrsg. Bremen: Universität Bremen, 6, 2002, 129-148. ISBN: 3833000333.

Schneider, R., Schulz, A., Bertrand, C., Kulmburg, A., Oldewurte, A., Uhlenwinkel, V., Viale, D. 2002.
The performance of spray-formed tool steels in comparison to conventional route material. 6th International Tooling Conference, Karlstad, Sweden,. Karlstad, Sweden: Karlstad University, 2002, 1111-1124.

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlmann, R., Kulmburg, A., Oldewurtel, A., Schneider, R., Viale, D. 2002.
Spray forming of high-alloyed tool steels to billets of medium sized dimensions. 6th International Tooling Conference, Karlstad, Schweden,. Karlstad, Schweden: Karlstad University, 2002, 1125-1146.

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlmann, R., Kulmburg, A., Oldewurtel, R., Schneider, R., Viale, D. 2002.
High-alloyed Tools Steels Spray-formed to Medium Size Billets and Their Performance in Comparison to Conventional Route Material. Symposium Spray Forming, Bremen,. Uhlenwinkel, V., Ziesenis, J., Bauckhage, K., Hrsg. Bremen: Universität Bremen, 6, 2002, 149-174. ISBN: 3-8330-0033-3.

Kühne, U., Fritsching, U., Bauckhage, K. 2001.
Ultrasound Assisted Transport of Highly Disperse Metal Powders. PARTEC 2001, International Congress for Particle Technology, Nürnberg, Germany,. Nürnberg: NürnbergMesse GmbH, 2001, 7.

Lohner, H., Czisch, C., Schreckenberg, P., Fritsching, U., Bauckhage, K. 2001.
Zweistoff-Zerstäubung mit Heißgas. Spray 2001, 6. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Hamburg, Deutschland,. Eggers, R., Peric, M., Hrsg. Hamburg: TuTech GmbH, 2001, 9. ISBN: 3930400464.

Walter, A. 2001.
Kriterien zur Leistungsbeurteilung von Kühlschmierstoffen und Additiven in der Zerspanung. Tribologie-Fachtagung 2001, Reibung, Schmierung und Verschleiß, Göttingen, 24. - 26. September 2001. Moers: Gesellschaft für Tribologie, 2, 2001, 70/1-70/10. ISBN: 3-00-003404-8.

Walter, A. 2001.
Potenzial von Kühlschmierstoffen gezielt nutzen. Tagung der VDI - Gesellschaft Produktionstechnik, Trocken oder nass - wohin geht die Metallbearbeitung? Tendenzen in der Kühlschmierstoffanwendung, Bremen,. Düsseldorf: VDI-Verlag, 1635, 2001, 33-47. ISBN: 3-18-091635-4.

Walter, A. 2001.
Wieviel Schmierstoff ist notwendig - Stand der Minimalmengenschmierung und Trockenbearbeitung. Technische Arbeitstagung Hohenheim, Hohenheim, 7.7.2001. Hamburg: Beratungsgesellschaft für Mineralöl-Anwendungstechnik GmbH, 7, 2001, CD-ROM. ISBN: ISSN 0341-1893.

Matthaei-Schulz, E., Schulz, A., Mayr, P. 2001.
Gefügeauswertung an sprühkompaktieren Werkstoffen mit bildanalytischen Methoden. Sprayforming, Bremen,. Bauckhage, K., Uhlenwinkel, V., Hrsg. Amsterdam: Elsevier, 5, 2001, 179-191.

Meyer, O., Schneider, A., Tillwick, J., Uhlenwinkel, V., Fritsching, U. 2001.
Wärmeübergangskoeffizienten an einem schräg angeströmten Bolzen für die Anwendung beim Sprühkompaktieren. Kolloquium des SFB 372, Bremen, Deutschland,. K. Bauckhage, V. Uhlenwinkel, Hrsg. Bremen, Deutschland: Universität Bremen 2001, 5, 2001, 155 - 178. ISBN: 3-88722-508-2.

Ziesenis, J., Bauckhage, K. 2001.
Partikelanalyse mittels Streulichtmessungen im unbewegten und bewegten Sprühkegel. Sprayforming, Bremen,. Bauckhage, K., Uhlenwinkel, V., Hrsg. Bremen: Universität Bremen, 5, 2001, 97-137. ISBN: 3887225082.

Mulhem, B., Fritsching, U., Schulte, G., Bauckhage, K. 2001.
Effect of Solid Particle Size on Suspension Atomization. ILASS-Europe 2001, Zurich, Switzerland,. Ineichen, Beat, Hrsg. Zurich: ETH, 2001, 6. ISBN: 3952224405.

Mulhem, B., Fritsching, U., Schulte, G., Bauckhage, K. 2001.
Zweistoff-Zerstäubung von Suspensionen bei Variation von Feststoffpartikelgröße und Sus-pensionsliquid. Spray 2001, 6. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Hamburg, Deutschland,. Eggers, R., Peric, M., Hrsg. Hamburg: TuTech GmbH, 2001, 8. ISBN: 3930400464.

Mulhem, B., Schulte, G., Fritsching, U., Bauckhage, K. 2001.
Atomization of Suspension in Twin-Fluid Atomizer. PARTEC 2001, International Congress for Particle Technology, Nürnberg, Bermany,. Nürnberg: NürnbergMesse GmbH, 2001, 9.

Fritsching, U., Gillandt, I. 2001.
Derivation and Discussion of Turbulence Energy Spectra in Dispersed Multiphase Jet Flow. 4th International Conference on Multiphase Flow (ICMF-2001), New Orleans, USA,. New Orleans: Elsevier, 2001, 12.

Fritsching, U., Gillandt, I., Bauckhage, K. 2001.
Measurement of Turbulence Modulation Effects in Gas/Particle Two-Phase Flow. 3rd European Congress of Chemical Engineering ECCE, Nuremberg, Germany,. Frankfurt am Main: BAUVERLAG GMBH, 2001, 14.

Fritsching, U., Markus, S., Bauckhage, K. 2001.
Liquid Jet Instability of Liquid Metals prior to Atomization. 4th International Conference on Multiphase Flow (ICMF-2001), New Orleans, USA,. New Orleans: Elsevier, 2001, 11.

Fritsching, U., Mulhem, B., Bauckhage, K. 2001.
Droplet Characteristics in Liquid Atomization with Suspended Particles. 6th World Congress of Chemical Engineering, Melbourne, Australia,. Amsterdam: Elsevier, 1, 2001, 7. ISBN: 0-7340-2201-8 0444513094.

Fritsching, U., Zöller, H., Ulrich, J. 2001.
Heat Transfer in Boundary Layers of Single Crystals in Flowing Solutions. 6th World Congress of Chemical Engineering, Melbourne, Australia,. Amsterdam: Elsevier, 2001, 6. ISBN: 0-7340-2201-8 0444513094.

Fritsching, U., Gillandt, I., Backhage, K. 2001.
Measurement of Turbulence Modulation Effects in Gas/Particle Two-Phase Flow. European Congress of Chemical Engineering ECCE, Nürnberg,. Frankfurt am Main, Germany: DECHEMA, 73, 2001, CD-ROM. OPEN ACCESS

Rentsch, R. 2001.
On the on-set of chip formation and the pro-cess stability in cutting at atomic level. International Conference on Precision En-gineering (ICPE), Yokohama, Japan, 18 - 20 July, 2001. Inasaki, I., Hrsg. Yokohama, Japan: Kluwer Academic Publ., 2001, 274-278.

Schimanski, K., Schulz, A., Vetters, H., Mayr, P. 2001.
Sprühkompaktieren aushärtbarer Al-Cu-Legierungen. Sprayforming, Bremen,. Bauckhage, K., Uhlenwinkel, V., Hrsg. Amsterdam: Elsevier, 5, 2001, 193-209.

Schneider, A., Meyer, O., Tillwick, J., Uhlenwinkel, V., Frichting, U. 2001.
Konvektiver Wärmeübergang an einem schräg angeströmten Bolzen in einer turbulenten Düsenströmung. Sprayforming, Bremen,. Bauckhage, K., Uhlenwinkel, V., Hrsg. Bremen: Universität Bremen, 5, 2001, 155-178. ISBN: 3887225082.

Schneider, A., Uhlenwinkel, V., Bauckhage, K. 2001.
Zum Ausfließen von Metallschmelzen. Sprayforming, Bremen,. Bauckhage, K., Uhlenwinkel, V., Hrsg. Bremen: Universität Bremen, 5, 2001, 69-95. ISBN: 3887225082.

Hunkel, M., Lübben, T., Belkessam, O., Fritsching, U., Hoffmann, F., Mayr, P. 2001.
Modeling and Simulation of Coupled Gas and Material Behaviour during Gas Quenching. ASM 2001, Heat Treatment, Indianapolis, Indiana, USA,. Indianapolis, Indiana, USA: ASM International, 2001, 9. ISBN: 0-87170-754-3.

Buchholz, M., Uhlenwinkel, V., Freyberg, A.v., Bauckhage, K. 2001.
Specific Enthalpy Measurement in Molten Metal Spray. Sprayforming, Bremen,. Bauckhage, K., Uhlenwinkel, V., Hrsg. Amsterdam: Elsevier, 5, 2001, 139-154. ISBN: ISSN: 0921-5093.

Tinscher, R., Bomas, H., Mayr, P. 2000.
Mechanical Properties of a Spray Deposited Bearing Steel. Spray Deposition and Melt Atomization, Bremen,. Bauckhage, K., Uhlenwinkel, V., Frichting, U., Hrsg. Amsterdam: Elsevier, 1, 2000, 75-90. ISBN: 3-88722-473-6.

Mandrysch, T., Boß, V., Jung, M., Harbecke, U., Wittmann, M., Menze, B., Illenseer, S., Weber, T. 2000.
Prozessintegrierte Qualitätsprüfung in der Feinbearbeitung. Prozeßintegrierte Qualitätssicherung metallischer Bauteile., Hannover,. Haferkamp, H., Hrsg. Hannover: Sonderforschungsbereich 326, Transferbereich 18, 2000, 44-88.

Markus, S., Fritsching, U., Bauckhage, K. 2000.
Jet Break Up of Liquid Metals. Spray Deposition and Melt Atomization SDMA 2000, Bremen, Germany,. Bauckhage, K., Uhlenwinkel, V., Frichting, U., Hrsg. Amsterdam: Elsevier, 2, 2000, 497 - 510. ISBN: 3-88722-473-6.

Meyer, O., Fritsching, U., Bauckhage, K. 2000.
Numerical Investigation of Alternative Process Conditions for Influencing the Thermal History of Spray Deposited Billets. Spray Deposition and Melt Atomization, Bremen,. Bauckhage, K., Uhlenwinkel, V., Frichting, U., Hrsg. Amsterdam: Elsevier, 2, 2000, 771-787.

Freyberg von, A., Henein, H., Uhlenwinkel, V 2000.
An Analysis of Droplet Cooling in the Atomization of a Cu-6Sn Alloy. Spray Deposition and Melt Atomization, Bremen, 26-28 June, 2000. Bauckhage, K., Uhlenwinkel, V., Fritsching, U., Hrsg. Amsterdam: Elsevier, 2, 2000, 647-658.

Ziesenis, J., Tillwick, J., Uhlenwinkel, V., Bauckhage, K. 2000.
Analysis of a Spray Forming Process with Scanning Atomizer Using Modified Phase-Doppler-Anemometry. Spray Deposition and Melt Atomization, Bremen,. Bauckhage, K., Uhlenwinkel, V., Frichting, U., Hrsg. Amsterdam: Elsevier, 2, 2000, 691-702. ISBN: 3-88722-473-6.

Mulhem, B., Fritsching, U., Schulte, G., Bauckhage, K. 2000.
Atomization of Suspensions in a Twin-Fluid Atomizer. IFPRI-Annual Meeting, Scheveningen, Niederlande,. Scheveningen, Niederlande: 2000, 21.

Pedersen, T. B., Hattel, J. H., Pryds, N. H., Pedersen, A. S., Buchholz, M., Uhlenwinkel, V 2000.
A new integrated numerical model for spray atomization and deposition: Comparison between numerical results and experiments. Spray Deposition and Melt Atomization, Bremen,. Bauckhage, K., Uhlenwinkel, V., Frichting, U., Hrsg. Amsterdam: Elsevier, 2, 2000, 813-824.

Gillandt, I., Crowe, C.T., Fritsching, U. 2000.
Analysis of Turbulence Modulation Effects in Dispersed Two-Phase Jet Flow. Proceeding of American Society of Mechanical Engineers; Fluids Engineering Division, Boston Massachusetts,. Boston Massachusetts: ASME, FED-Vol. 251, 2000, 389-396. ISBN: 0791819795.

Schlütter, F., Juling, H. 2000.
Dom zu Halberstadt - Mikroskopische Untersuchungen an Testflächen. Deutsch-Tschechisches Kolloquium für Denkmalpfleger und Restauratoren, Marienthal, 21.-26.03.2000. Marienthal: 1, 2000,