Boontanom, A., Maddaloni, M., Suwanpinij, P., Vassalini, I., Alessandri, I. 2024.
Industrial waste against pollution: Mill scale-based magnetic hydrogel for rapid abatement of Cr(VI). Environmental Science: Water Research & Technology. , DOI: 10.1039/d3ew00490b. OPEN ACCESS

Hesselmann, M., Fechte-Heinen, R., Mädler, L., Steinbacher, M., Tönjes, A. 2024.
Smart‐Alloying – Liquid in-situ re-alloying in additive manufacturing. Additive Manufacturing. 80 , DOI: 10.1016/j.addma.2024.103988. OPEN ACCESS

Fuchs, L., Kirstein, T., Mahr, C., Furat, O., Baric, V., Rosenauer, A., Mädler, L., Schmidt, V. 2024.
Using convolutional neural networks for stereological characterization of 3D hetero-aggregates based on synthetic STEM data. Machine Learning: Science and Technology. 5 (2), 025007. DOI: 10.1088/2632-2153/ad38fd. OPEN ACCESS

Hoja, S., Guba, N., Haupt, N., Surm, H., Hüsemann, T. 2024.
Investigation of Dimensional and Shape Changes in Combined Surface Layer Heat Treatments of Gear Components Made of EN31CrMoV9 and EN42CrMo4. HTM Journal of Heat Treatment and Materials. 79 (4), 161-183. DOI: 10.1515/htm-2024-0014. OPEN ACCESS

Lübben, T., Frerichs, F., Barbieri, M., Buss, L., Riefler, N., Fritsching, U. 2024.
Quenching of Disk-Shaped Components in Aqueous Polymer Solutions. HTM Journal of Heat Treatment and Materials. 79 (2), 53-80. DOI: 10.1515/htm-2024-0006.

Chouhan, A., Mädler, L., Ellendt, N. 2024.
Modeling of rapid solidification in Laser Powder Bed Fusion processes. Computational Materials Science. 238 , 112918. DOI: https://doi.org/10.1016/j.commatsci.2024.112918. OPEN ACCESS

Hüsemann, T., Guba, N., Surm, H., Heinzel, C. 2024.
Effect of alloy-specific case-hardening layers on the grindability of gears. CIRP Annals - Manufacturing Technology. 73 (1), 253-256. DOI: 10.1016/j.cirp.2024.04.030. OPEN ACCESS

Mahr, C., Stahl, J., Gerken, B., Baric, V., Frei, M., Krause, F. F., Grieb, T., Schowalter, M., Mehrtens, T., Kruis, E., Mädler, L., Rosenauer, A. 2024.
Characterization of mixing in nanoparticle hetero-aggregates by convolutional neural networks. Nano Select. 5 (4), 2300128. DOI: https://doi.org/10.1002/nano.202300128. OPEN ACCESS

Mahr, C., Stahl, J., Gerken, B., Krause, F. F., Schowalter, M., Grieb, T., Mädler, L., Rosenauer, A. 2024.
Characterization of structure and mixing in nanoparticle hetero-aggregates using convolutional neural networks: 3D-reconstruction versus 2D-projection. Ultramicroscopy. , 114020. DOI: https://doi.org/10.1016/j.ultramic.2024.114020. OPEN ACCESS

Jedamski, R., Epp, J. 2024.
Suitability of different micromagnetic measurement methods for the detection of thermo-mechanical surface damages from grinding. CIRP Journal of Manufacturing Science and Technology. 51 , 47-56. DOI: 10.1016/j.cirpj.2024.04.003. OPEN ACCESS

Jedamski, R., Kuhlmann, G., Karpuschewski, B., Epp, J. 2024.
Detection of thermo-mechanical damages by in-process Barkhausen Noise Analysis combined with Grinding Power Evaluation. Procedia CIRP. 123 , 71-76. DOI: https://doi.org/10.1016/j.procir.2024.05.015. OPEN ACCESS

Jedamski, R., Kuhlmann, G., Rößler, M., Karpuschewski, B., Dix, M., Epp, J. 2024.
Towards developing a control of grinding processes using a combination of grinding power evaluation and Barkhausen noise analysis. Production Engineering. , DOI: 10.1007/s11740-023-01247-x. OPEN ACCESS

de Castro, P., Silveira, A. C. d. F., Dong, J., Turra, C. J., Rocha, A. S., Fechte-Heinen, R., Epp, J. 2024.
Effect of Thermomechanical Processing on the Transformation Kinetics, Microstructure and Mechanical Properties of a Continuously Cooled Cementite-free Bainitic Steel. HTM Journal of Heat Treatment and Materials. 79 (3), 130-146. DOI: https://doi.org/10.1515/htm-2024-0008.

Junker, B., Kobald, A., Ewald, C., Janoschek, P., Schalk, M., Weimar, U., Mädler, L., Bârsan, N. 2024.
Multivariate Analysis of Light-Activated SMOX Gas Sensors. ACS Sensors. 9 (3), 1584-1591. DOI: 10.1021/acssensors.4c00078. OPEN ACCESS

Witte, A., Tse, S. D., Mädler, L. 2024.
Acoustic signatures of single disrupting FSP droplets in a heated oxygen atmosphere. Journal of Aerosol Science. 179 , 106380. DOI: https://doi.org/10.1016/j.jaerosci.2024.106380. OPEN ACCESS

Giefer, P., Heyse, A., Drusch, S., Fritsching, U. 2024.
Cysteines in beta-lactoglobulin affects its interfacial adsorption and protein film stabilization. J. Colloid. Interface Sci.. 677 (Pt A), 217-230. DOI: 10.1016/j.jcis.2024.07.088. OPEN ACCESS

Giefer, P., Heyse, A., Drusch, S., Fritsching, U. 2024.
How adsorbed proteins at solid interfaces impact the droplet propagation through micro capillaries. Physics of Fluids. 36 (1), DOI: 10.1063/5.0180959. OPEN ACCESS

Narayan, N., Fritsching, U. 2024.
Investigation of the hydrodynamic and thermodynamic behavior of the liquid jet quenching process. Heat and Mass Transfer. 60 (4), 627-650. DOI: 10.1007/s00231-024-03447-2. OPEN ACCESS

Narayan, N., Landgraf, P. M., Lampke, T., Fritsching, U. 2024.
Artificial Intelligence Modeling of the Heterogeneous Gas Quenching Process for Steel Batches Based on Numerical Simulations and Experiments. Dynamics. 4 (2), 425-456. DOI: 10.3390/dynamics4020023. OPEN ACCESS

Schumski, L., Tonn, T., Sölter, J., Avila, K., Buss, L., Karpuschewski, B., Fritsching, U. 2024.
Minimum Quantity Lubrication (MQL) Supply through Internal Cooling Channels in Drilling Processes. Journal of Manufacturing and Materials Processing. 8 (2), DOI: 10.3390/jmmp8020069. OPEN ACCESS

Eich, M., Heinzel, C. 2024.
Tool concept for the increase of the mechanical process effect in grinding. Procedia CIRP. 123 , 476-480. DOI: 10.1016/j.procir.2024.05.083. OPEN ACCESS

Scott-Fordsmand, J, J., Gomes, S. I. L., Pokhrel, S., Mädler, L., Fasano, M., Asinari, P., Tämm, K., Jänes, J., Amorim, M. J. B. 2024.
Machine Learning Allowed Interpreting Toxicity of a Fe-Doped CuO NM Library Large Data Set ─ An Environmental In Vivo Case Study. ACS Applied Materials & Interfaces. , DOI: 10.1021/acsami.4c07153. OPEN ACCESS

Groeneveld, J., Pokhrel, S., Mädler, L. 2024.
Flame emission spectroscopy of single droplet micro explosions. Nanoscale Horizons. 9 (6), 956-967. DOI: 10.1039/D3NH00558E. OPEN ACCESS

Bayerlein, B., Schilling, M., Birkholz, H., Jung, M., Waitelonis, J., Mädler, L., Sack, H. 2024.
PMD Core Ontology: Achieving semantic interoperability in materials science. Materials & Design. 237 , 112603. DOI: https://doi.org/10.1016/j.matdes.2023.112603. OPEN ACCESS

Zerwas, A., Avila, K., Paiva, J.L., Guardani, R., Achelis, L., Fritsching, U. 2024.
High Speed Video Image Analysis of Liquid Metal Atomization Process. Atomization & Sprays. 34 (5), 57-75. DOI: 1044-5110/24/$35.00.

Kuhlmann, G., Borysenko, D., Sölter, J., Karpuschewski, B. 2024.
Simultaneous high-speed cutting and high-feed milling: An investigation on surface integrity. Procedia CIRP. 123 , 59-64. DOI: 10.1016/j.procir.2024.05.013. OPEN ACCESS

Pokhrel, S., Fritsching, U., Mädler, L. 2024.
Review of the Gas-Phase Synthesis of Particle Heteroaggregates and Their Applications. KONA Powder and Particle Journal. advpub , DOI: 10.14356/kona.2025004. OPEN ACCESS

Sommer, M., Sitzmann, A., Hantzsche, K., Tobie, T., Stahl, K., Fechte-Heinen, R., Hoja, S. 2024.
Optimized Compound Layer Design for Highly Loaded Nitrided Gears. Journal of Materials Engineering and Performance. , DOI: 10.1007/s11665-024-09659-1. OPEN ACCESS

Kyrloglou, A., Giefer, P., Fritsching, U. 2024.
Numerical simulation of droplet dispersion within meso-porous membranes. Frontiers in Physics. 12 , DOI: 10.3389/fphy.2024.1282122. OPEN ACCESS

Frerichs, F., Lübben, T. 2023.
Determination of Machining Parameters for a Specific Adjustment of the Residual Stress Profile by Induction Hardening*. HTM Journal of Heat Treatment and Materials. 78 (2), 65-78. DOI: 10.1515/htm-2022-1040.

Stodt, M. F. B., Kiefer, J., Fritsching, U. 2023.
Impact of atomization and spray flow conditions on droplet μ-explosions and temporal self-similarity in the FSP process. Applications in Energy and Combustion Science. 15 , DOI: 10.1016/j.jaecs.2023.100170. OPEN ACCESS

Hesemans, E., Saffarzadeh, N., Maksoudian, C., Izci, M., Chu, T., Rios Luci, C., Wang, Y., Naatz, H., Thieme, S., Richter, C., Manshian, B. B., Pokhrel, S., Mädler, L., Soenen, S. J. 2023.
Cu-doped TiO(2) nanoparticles improve local antitumor immune activation and optimize dendritic cell vaccine strategies. Journal of Nanobiotechnology. PMC10009859 (1), 87. DOI: 10.1186/s12951-023-01844-z. OPEN ACCESS

Frey, M., Wegner, J., Soares Barreto, E., Ruschel, L., Neuber, N., Adam, B., Riegler, S. S., Jiang, H.-R., Witt, G., Ellendt, N., Uhlenwinkel, V., Kleszczynski, S., Busch, R. 2023.
Laser powder bed fusion of Cu-Ti-Zr-Ni bulk metallic glasses in the Vit101 alloy system. Additive Manufacturing. 66 , 103467. DOI: 10.1016/j.addma.2023.103467. OPEN ACCESS

Heyse, A., Gößmann, M. M., Giefer, P., Gäbel, P., Fritsching, U., Wagemans, A. M., Drusch, S. 2023.
Lipase adsorption during premix-membrane emulsification affects membrane surface properties and structural conformation of lipase. Process Biochemistry. 132 , 75-85. DOI: 10.1016/j.procbio.2023.07.008. OPEN ACCESS

Fritsching, U., Buss, L., Tonn, T., Schumski, L., Gakovi, J., Hatscher, J. D., Sölter, J., Avila, K., Karpuschewski, B., Gerken, J. F., Wolf, T., Biermann, D., Menze, C., Möhring, H.-C., Tchoupe, E., Heidemanns, L., Herrig, T., Klink, A., Nabbout, K., Sommerfeld, M., Luther, F., Schaarschmidt, I., Schubert, A., Richter, M. 2023.
Flow Visualisation and Evaluation Studies on Metalworking Fluid Applications in Manufacturing Processes—Methods and Results. Processes. 11 (9), DOI: 10.3390/pr11092690. OPEN ACCESS

Hlawatsch, F., Kurkowski, H., Eden, W., Istanbuly, Z., Ufermann-Wallmeier, D. 2023.
CO2-armer Ökomauerstein. ce/papers Proceedings in civil engineering. 6 (6), 1018-1026. DOI: doi.org/10.1002/cepa.2889. OPEN ACCESS

Hoja, S., Baustert, R., Hasselbruch, H., Steinbacher, M., Fechte-Heinen, R. 2023.
Investigation of combined surface treatments and coatings to increase the wear behavior of heat treatable steels. Surface and Coatings Technology. 472 , DOI: 10.1016/j.surfcoat.2023.129929. OPEN ACCESS

Hoja, S., Birjandi, B. K., Hasselbruch, H., Epp, J. 2023.
An Investigation into the Wear Behavior of Martensitically Transformed Nitrided Layers. Lubricants. 11 (11), DOI: 10.3390/lubricants11110481. OPEN ACCESS

Lübben, T., Frerichs, F. 2023.
Quenching with Aqueous Polymer Solutions. HTM Journal of Heat Treatment and Materials. 78 (3), 121-140. DOI: 10.1515/htm-2022-1045.

Buss, L., Schumski, L., Sölter, J., Avila, K., Karpuschewski, B., Fritsching, U. 2023.
Minimum Quantity Lubrication (MQL) multiphase dynamics of a vibration-assisted drilling process. Procedia CIRP. 117 , 420-425. DOI: 10.1016/j.procir.2023.03.071. OPEN ACCESS

Sandmann, K., Falcone, M., Buss, L., Riefler, N., Abdoly, K., Oltmann, H., Fritsching, U. 2023.
Investigation of Metal Powder Injection into a Combustion Chamber by Large Eddy Simulation for Power to X Studies . Chemie Ingenieur Technik. 95 (1-2), DOI: 10.1002/cite.202200141. OPEN ACCESS

Sandmann, K., Fritsching, U. 2023.
Rücktitelbild Chemie Ingenieur Technik. Chemie Ingenieur Technik. 95 (1-2), 296-296. DOI: 10.1002/cite.202370108.

Sandmann, K., Fritsching, U. 2023.
Acoustic separation and fractionation of property-distributed particles from the gas phase. Advanced Powder Technology. 34 (12), DOI: 10.1016/j.apt.2023.104270. OPEN ACCESS

Hussain, S., Tönnißen, N., Soares Barreto, E., Gärtner, E., Kostka, A., Springer, H., Uhlenwinkel, V., Ellendt, N. 2023.
Effect of substrate temperature on in-situ precipitation during laser powder bed fusion of Fe-TiB 2 high modulus steel. Virtual and Physical Prototyping. 18 (1), DOI: 10.1080/17452759.2023.2269906. OPEN ACCESS

Schieber, C., Hettig, M., Muller, V., Zaeh, M. F., Heinzel, C. 2023.
Modeling of laser processing as a distortion compensation strategy for profile grinding. Production Engineering. 17 (1), 47-56. DOI: 10.1007/s11740-022-01144-9. OPEN ACCESS

Jedamski, R., Gerhardt, B., Müller, Ch., Martinez, J., Epp, J. 2023.
Detectability of Thermomechanical Surface Damages on Quenched and Tempered, Nitrided and Case-Hardened Steels by Barkhausen Noise Analysis. HTM Journal of Heat Treatment and Materials. 78 (1), 32-48. DOI: 10.1515/htm-2022-1036.

Mensching, N., Kruger, M. L., Kvaratskheliya, A., Meyer, D., Tracht, K., Okulov, I., Mädler, L. 2023.
Dry-Adhesive Microstructures for Material Handling of Additively Manufactured and Deep-Rolled Metal Surfaces with Reference to Mars. Materials. PMC10254522 (11), DOI: 10.3390/ma16114170. OPEN ACCESS

Cui, C., Stern, F., Ellendt, N., Uhlenwinkel, V., Steinbacher, M., Tenkamp, J., Walther, F., Fechte-Heinen, R. 2023.
Gas Atomization of Duplex Stainless Steel Powder for Laser Powder Bed Fusion. Materials. 16 (1), DOI: 10.3390/ma16010435. OPEN ACCESS

Cui, F., Wang, J., Gan, X., Yu, D., Okulov, I., Tian, Q., Guo, X. 2023.
Dealloying Superalloy by Liquid Mg for the Selective Extraction of Ni. Metals and Materials International. 29 (3), 833-844. DOI: 10.1007/s12540-022-01249-x. OPEN ACCESS

de Araujo, A. P. M., Kiminami, C. S., Uhlenwinkel, V., Gargarella, P. 2023.
High-temperature tensile properties of an aluminum quasicrystal-forming alloy manufactured by laser powder bed fusion. Materials Science and Engineering: A. 886 , 145670. DOI: 10.1016/j.msea.2023.145670. OPEN ACCESS

Akuata, C. K., Gunawan, F. R., Suwanpinij, P., Zander, D. 2023.
Microstructure Evolution and Localized Corrosion Susceptibility of an Al-Zn-Mg-Cu-Zr 7xxx Alloy with Minor Cr Addition. Materials. 16 (3), 946. DOI: 10.3390/ma16030946. OPEN ACCESS

Al-Zaidawi, S., Mahdie, K., Bosse, S. 2023.
A Pore Classification System for the Detection of Additive Manufacturing Defects Combining Machine Learning and Numerical Image Analysis. Engineering Proceeding. 58 , 122. DOI: https://doi.org/10.3390/ecsa-10-16024. OPEN ACCESS

Gärtner, E., Witte, A., Peter, N. J., Devulapalli, V., Ellendt, N., Dehm, G., Jägle, E. A., Uhlenwinkel, V., Mädler, L. 2023.
Melt pool signatures of TiN nanoparticle dry-coated Co25Cr25Fe25Ni25 metal powder in laser-powder-bed-fusion. Materials and Design. 226 , DOI: 10.1016/j.matdes.2023.111626. OPEN ACCESS

Altmann, M., Benthien, T., Ellendt, N., Tönjes, A. 2023.
Defect Classification for Additive Manufacturing with Machine Learning. Materials (Basel). PMC10533092 (18), DOI: 10.3390/ma16186242.

Mohammadi, S., Poostforooshan, J., Stodt, M. F. B., Olszok, V., Kiefer, J., Fritsching, U., Weber, A. P. 2023.
Tailoring crystal structure and morphology of MnOx nanoparticles via electrospray-assisted flame spray pyrolysis. Applications in Energy and Combustion Science. 14 , DOI: 10.1016/j.jaecs.2023.100151. OPEN ACCESS

Geitner, M., Zornek, B., Hoja, S., Tobie, T., Stahl, K. 2023.
Material Influence on the Micropitting and Wear Resistance of Nitrided External and Internal Gears. HTM Journal of Heat Treatment and Materials. 78 (6), 319-340. DOI: 10.1515/htm-2023-0030. OPEN ACCESS

Dong, Y. P., Wang, D. W., Li, Q., Luo, X., Zhang, J., Prashanth, K. G., Wang, P., Eckert, J., Mädler, L., Okulov, I., Yan, M. 2023.
Strong and ductile titanium via additive manufacturing under a reactive atmosphere. Materials Today Advances. 17 , 100347. DOI: 10.1016/j.mtadv.2023.100347. OPEN ACCESS

Aycil, H., Eichhorn, S., Ruff, A., Ufermann-Wallmeier, D. 2023.
Gipsgebundene Bauplatten aus feinem Rezyklat-Porenbeton-Brechsand. ce/papers Proceedings in civil engineering. 6 (6), 509-514. DOI: 10.1002/cepa.2803. OPEN ACCESS

Gerken, B., Mahr, C., Stahl, J., Grieb, T., Schowalter, M., Krause, Florian F., Mehrtens, T., Mädler, L., Rosenauer, A. 2023.
Material Discrimination in Nanoparticle Hetero‐Aggregates by Analysis of Scanning Transmission Electron Microscopy Images.Particle and Particle Systems Characterization PARTICLE AND PARTICLE SYSTEMS CHARACTERIZATION. 40 (9), DOI: 10.1002/ppsc.202300048. OPEN ACCESS

Ghavidel, A., Jorbandian, A., Miklós, B., Gelbrich, J., Morell, J. J., Sandu, I., Hosseinpourpia, R. 2023.
Degradation assessment of archaeological oak (Quercus spp.) buried under oxygen-limited condition. Holzforschung. 77 (3) , 198-207. DOI: 10.1515/hf-2022-0168. OPEN ACCESS

Witte, A., Mädler, L. 2023.
Single droplet combustion of iron nitrate-based precursor solutions: Investigation of time- and size scales of isolated burning FSP-droplets. Applications in Energy and Combustion Science. 14 , DOI: 10.1016/j.jaecs.2023.100147. OPEN ACCESS

Giefer, P., Bäther, S., Kaufmes, N., Kieserling, H., Heyse, A., Wagemans, W., Barthel, L., Meyer, V., Schneck, E., Fritsching, U., Wagemans, A. M. 2023.
Characterization of β-lactoglobulin adsorption on silica membrane pore surfaces and its impact on membrane emulsification processes. Journal of Colloid and Interface Science. 652 , 1074-1084. DOI: 10.1016/j.jcis.2023.08.103.

Giefer, P., Kyrloglou, A., Fritsching, U. 2023.
Impact of wettability on interface deformation and droplet breakup in microcapillaries. Physics of Fluids. 35 (4), DOI: 10.1063/5.0135101. OPEN ACCESS

Barbieri, M., Achelis, L., Fritsching, U. 2023.
Effect of Y-jet nozzle geometry and operating conditions on spray characteristics and atomizer efficiency. International Journal of Multiphase Flow. 168 , DOI: 10.1016/j.ijmultiphaseflow.2023.104585.

Barbieri, M., Avila, K., Achelis, L., Utzig, J., Meier, H., Fritsching, U. 2023.
Effect of non-axisymmetric inlet ports and operating conditions on drop dynamics of an internal mixing atomizer. Atomization and Sprays. 33 (2), 29. DOI: 10.1615/AtomizSpr.2022042993.

Kinner-Becker, T., Sölter, J. 2023.
Influence of initial stress on the residual stress generated by deep rolling. Procedia CIRP. 117 , 128-132. DOI: 10.1016/j.procir.2023.03.023. OPEN ACCESS

Narayan, N., Gopalkrishna, S.B., Mehdi, B., Ryll, S., Specht, E., Fritsching, U. 2023.
Multiphase numerical modeling of boiling flow and heat transfer for liquid jet quenching of a moving metal plate. International Journal of Thermal Sciences. 194 , 1-17. DOI: https://doi.org/10.1016/j.ijthermalsci.2023.108587. OPEN ACCESS

Worasaen, K., Suwanpinij, P., Tuchinda, K. 2023.
Effect of Cryogenic Treatment on the Microstructure Modification of SKH51 Steel. Applied Science and Engineering Progress. 16 (1), DOI: 10.14416//j.asep.2021.11.008.

Gomes, S. I. L., Roca, Carlos P., Pokhrel, S., Mädler, L., Scott-Fordsmand, J. J., Amorim, M. J. B. 2023.
TiO2 nanoparticles' library toxicity (UV and non-UV exposure) – High-throughput in vivo transcriptomics reveals mechanisms. NanoImpact. 30 , 100458. DOI: 10.1016/j.impact.2023.100458. OPEN ACCESS

Eich, M., Meyer, D., Heinzel, C. 2023.
Utilisation Potential of Mechanical Material Loads during Grinding by Means of a Novel Tool Concept. Journal of Manufacturing and Materials Processing. 7 (167), DOI: doi.org/10.3390/jmmp7050167. OPEN ACCESS

Barreto, E. S., Frey, M., Ruschel, L. M., Wegner, J., Kleszczynski, S., Busch, R., Ellendt, N. 2023.
Gas atomization of fully-amorphous Ni62Nb38 powder. Materials Letters. 357 , 135798. DOI: 10.1016/j.matlet.2023.135798. OPEN ACCESS

Yang, T., Hemeryck, A., Pokhrel, S., Chen, W., Mädler, L., Weimar, U., Barsan, N. 2023.
HCHO Sensing Mechanism of In4Sn3O12 Revealed by DRIFTS and DFT. Journal of Physical Chemistry C. 127 (22), 10499–10507. DOI: 10.1021/acs.jpcc.3c00686. OPEN ACCESS

Ooi, S., Reiff-Musgrove, R., Gaiser-Porter, M., Steinbacher, M., Griffin, I., Campbell, J., Burley, M., Warwick, M., Vaka, H., Fang, C., Clyne, T. W. 2023.
Profilometry-Based Indentation Plastometry Testing for Characterization of Case-Hardened Steels. Advanced Engineering Materials. 25 (10), 2201512. DOI: 10.1002/adem.202201512. OPEN ACCESS

Silveira, A. C. d. F., Fechte-Heinen, R., Epp, J. 2023.
Microstructure evolution during laser-directed energy deposition of tool steel by in situ synchrotron X-ray diffraction. Additive Manufacturing. 63 (February 2023), DOI: 10.1016/j.addma.2023.103408. OPEN ACCESS

Örnek, C., Payam, B., Gloskovskii, A., Kazmanl ı, K ., Mohamed, N ., Derin, B ., Ürgen, M., Chou, C., Yen, H., Avc ı, B ., Ooi, S. 2023.
Understanding the passive behaviour of low-chromium high-strength Hybrid steel in corrosive environments. npj Materials Degradation. 7 (1), 71. DOI: 10.1038/s41529-023-00392-z. OPEN ACCESS

Becker, L., Boes, J., Lentz, J., Cui, C., Steinbacher, M., Li, Y., Fechte-Heinen, R., Theisen, W., Weber, S. 2023.
Influence of annealing time on the microstructure and properties of additively manufactured X2CrNiMoN25–7–4 duplex stainless steel: Experiment and simulation. Materialia. 28 , DOI: 10.1016/j.mtla.2023.101720.

Becker, L., Lentz, J., Benito, S., Cui, C., Ellendt, N., Fechte-Heinen, R., Weber, S. 2023.
A comparative study of in-situ alloying in laser powder bed fusion for the stainless steel X2CrNiMoN20-10-3. Journal of Materials Processing Technology. 318 , DOI: 10.1016/j.jmatprotec.2023.118038.

Endres, S., Mädler, L. 2023.
Asymmetric Three-Phase Surface Tension Forces in Agglomerating Particulate Systems . Chemie Ingenieur Technik. 95 (1-2), 278-283. DOI: https://doi.org/10.1002/cite.202200128. OPEN ACCESS

Skalecki, M., Sommer, M., Steinbacher, M., Hoja, S. 2023.
Mechanism and Observation of Pore Formation during Carbonitriding. HTM Journal of Heat Treatment and Materials. 78 (2), 105-118. DOI: doi:10.1515/htm-2022-1028.

Ostermayer, P., Allam, T., Shen, X., Song, W., Burkart, K., Blinn, B., Clausen, B., Bleck, W., Beck, T. 2023.
Effect of retained austenite on the fatigue behavior of modified bainitic 100Cr6 steels considering local phase transformation. Materials Science and Engineering: A. 877 , DOI: 10.1016/j.msea.2023.145204.

Zhang, H., Lu, J., Xu, G., Luo, K., Okulov, I., Xue, W. 2023.
Island scan length effect on processability, microstructure, and mechanical property of laser powder bed fusion processed nickel matrix composites. Materials Science and Engineering: A. 864 , 144559. DOI: 10.1016/j.msea.2022.144559.

Zhang, J., Schumacher, J., Clausen, B. 2023.
A comprehensive study on the influence of the scan pattern in two porosity levels and surface roughness on the fatigue behavior of laser powder bed fusion manufactured specimens made of steel H13. Journal of Materials Science. 58 , 10457–10483. DOI: 10.1007/s10853-023-08541-0. OPEN ACCESS

Zhang, J., Zeißig, M., Dörfert, R., Jablonski, F., Kienzler, R., Schumacher, J., Clausen, B., Woieschke, P., Vollertsen, F. 2023.
Influence of laser beam scanning pattern and polar angle on the fatigue behavior of additively manufactured specimens made of steel 316L. Materials Science & Engineering A. 886 , 1-15. DOI: 10.1016/j.msea.2023.145651.

Belkacemi, L., Gault, B., Esin, V. A., Epp, J. 2023.
Ga-induced delithiation of grain boundaries in a Li containing Al-based alloy. Materials Characterization. 199 , DOI: 10.1016/j.matchar.2023.112812.

Sklenak, S., Mevissen, D., Brimmers, J., Brecher, C., Lenz, B., Mehner, A. 2023.
Einsatzverhalten und Verschleiß von PVD-beschichteten und fluid-frei geschmierten Zahnrädern. Forschung im Ingenieurwesen. 87 (3), 871-880. DOI: 10.1007/s10010-023-00681-8. OPEN ACCESS

Halisch, C., Milcke, B., Radel, T., Rentsch, R., Seefeld, T. 2023.
Influence of oxygen content in the shielding gas chamber on mechanical properties and macroscopic structure of Ti-6Al-4V during wire arc additive manufacturing. The International Journal of Advanced Manufacturing Technology. 124 (3), 1065-1076. DOI: 10.1007/s00170-022-10214-2. OPEN ACCESS

Bevilaqua, W. L., Epp, J., da Silva Rocha, A., Roelofs, H. 2023.
Explaining the Abnormal Dilatation Behavior During the Austenite Formation in a Microstructure of a Low-Carbon Low-Alloy Steel Containing Retained Austenite. Metallurgical and Materials Transactions A. 54 (8), 3349-3357. DOI: 10.1007/s11661-023-07105-w.

Soares Barreto, E., Wegner, J., Frey, M., Kleszczynski, S., Busch, R., Uhlenwinkel, V., Mädler, L., Ellendt, N. 2023.
Influence of oxygen in the production chain of Cu–Ti-based metallic glasses via laser powder bed fusion. Powder Metallurgy. , 1-12. DOI: 10.1080/00325899.2023.2179207. OPEN ACCESS

Peters, M., Hlawatsch, F., Weicht, A., Ufermann-Wallmeier, D. 2023.
"Spray-Slag“ – Alternative Aufbereitung flüssiger Hochofenschlacken. ce/papers Proceedings in civil engineering. 6 (6), 284-289. DOI: 10.1002/cepa.2882. OPEN ACCESS

Bianchi Neto, P., Buss, L., Stodt, M. F. B., Fritsching, U., Noriler, D. 2023.
Modeling the thermophoretic impact on nanoparticle production in an enclosed FSP reactor. Applications in Energy and Combustion Science. 15 , DOI: 10.1016/j.jaecs.2023.100169. OPEN ACCESS

Phyu, M. P., Adjei-Kyeremeh, F., Suwanpinij, P., Raffeis, I., Apel, M., Bührig-Polaczek, A. 2023.
Phase-Field Simulation of Microstructure Formation in Gas-Atomized Al–Cu–Li–Mg Powders. Materials. 16 (4), 1677. DOI: 10.3390/ma16041677. OPEN ACCESS

Kuhlmann, G., Guba, N., Hüsemann, T., Heinzel, C., Karpuschewski, B. 2023.
Tiefenwirkung bei variierten Abrichtbedingungen.wt Werkstatttechnik WT Werkstatttechnik. 112 (11-12), 499-505. DOI: 10.37544/1436–4980–2023–11–12–35. OPEN ACCESS

Sommer, M., Ebner, G., Decho, H., Hoja, S., Fechte-Heinen, R. 2023.
Surface preparation for characterization of nitride compound layers using hardness indentation and the Palmqvist method. Journal of Materials Research and Technology. 24 , 7974-7988. DOI: 10.1016/j.jmrt.2023.05.041.

Sommer, M., Kahl, W.-A., Fechte-Heinen, R., Hoja, S. 2023.
Microscopic Characterization of Compound Layers. Practical Metallography. 60 (4), 212-241. DOI: 10.1515/pm-2022-1028.

Fahimi, K., Mädler, L., Ellendt, N. 2023.
Measurement of surface tension with free-falling oscillating molten metal droplets: a numerical and experimental investigation. Experiments in Fluids. 64 (7), DOI: 10.1007/s00348-023-03678-9. OPEN ACCESS

Pokhrel, S., Stahl, J., Groeneveld, J., Schowalter, M., Rosenauer, A., Birkenstock, J., Mädler, L. 2023.
Flame Aerosol Synthesis of Metal Sulfides at High Temperature in Oxygen Lean Atmosphere. Advanced Materials Research. 35 (28), e2211104. DOI: 10.1002/adma.202211104. OPEN ACCESS

Bobrov, I., Epp, J. 2023.
Microscaled Multi-frequency Eddy Current Analysis for High Throughput Characterization of Steel Micro-samples. Journal of Nondestructive Evaluation. 42 (1), DOI: 10.1007/s10921-023-00930-4.

Poostforooshan, J., Belbekhouche, S., Olszok, V., Stodt, M. F. B., Simmler, M., Bierwirth, M., Nirschl, H., Kiefer, J., Fritsching, U., Weber, A. P. 2023.
Synthesis of Pure and Fe-Doped TiO2 Nanoparticles via Electrospray-Assisted Flame Spray Pyrolysis for Antimicrobial Applications. ACS Applied Nano Materials. , DOI: 10.1021/acsanm.3c03107. OPEN ACCESS

Fechte-Heinen, R., Fuhrländer, D., Mehner, A., Decho, H., Castens, M., Burkart, K., Tinscher, R., Stührmann, T. 2023.
The Hydrogen Challenge: Requirements for Future Materials - Die Wasserstoff-Challenge: Anforderungen an zukünftige Werkstoffe. HTM Journal of Heat Treatment and Materials. (4), 233-251. DOI: 10.1515/htm-2023-0014. OPEN ACCESS

Pulvermacher, S., Šaroun, J., Cabeza, S., Pirling, T., Kornmeier, J. Rebelo, Epp, J., Hofmann, M., Gibmeier, J. 2023.
Neutronographic Residual Stress Analysis for Materials With Depth Gradients of the Strain Free Lattice Parameter d0 for the Example of a Case-Hardened Steel 20MnCr5. Metallurgical and Materials Transactions A. 54 (9), 3448-3460. DOI: 10.1007/s11661-023-07076-y. OPEN ACCESS

Boinski, A., Riemer, O., Karpuschewski, B., Schneider, M., Guttmann, M., Worgull, M. 2022.
Fast tool machining and hot embossing for the manufacture of diffractive structured surfaces. Precision Engineering. 74 , 12-19. DOI: 10.1016/j.precisioneng.2021.10.002.

Langenhorst, L., Sölter, J., Heinzel, C. 2022.
Partitioning of primary shear zone heat in face milling. CIRP Annals - Manufacturing Technology. 71 (1), 53-56. DOI: 10.1016/j.cirp.2022.04.010. OPEN ACCESS

Rathmann, L., Rusche, T., Hasselbruch, H., Mehner, A., Radel, T. 2022.
Friction and wear characterization of LIPSS and TiN / DLC variants. Applied Surface Science. 584 , 152654. DOI: 10.1016/j.apsusc.2022.152654.

Heinzel, J., Jedamski, R., Rößler, M., Karpuschewski, B., Epp, J., Dix, M. 2022.
Hybrid approach to evaluate surface integrity based on grinding power and Barkhausen noise. Procedia CIRP. 108 , 489-494. DOI: 10.1016/j.procir.2022.03.076. OPEN ACCESS

Stern, F., Becker, L., Cui, C., Tenkamp, J., Uhlenwinkel, V., Steinbacher, M., Boes, J., Lentz, J., Fechte-Heinen, R., Weber, S., Walther, F. 2022.
Improving the Defect Tolerance of PBF‐LB/M Processed 316L Steel by Increasing the Nitrogen Content. Advanced Engineering Materials. , DOI: 10.1002/adem.202200751. OPEN ACCESS

Stodt, M. F. B., Groeneveld, J., Mädler, L., Kiefer, J., Fritsching, U. 2022.
Microexplosions of multicomponent drops in spray flames. Combustion and Flame. 240 , 112043. DOI: 10.1016/j.combustflame.2022.112043. OPEN ACCESS

Lenz, B., Hoja, S., Sommer, M., Hasselbruch, H., Mehner, A., Steinbacher, M. 2022.
Potential of Nitrided and PVD-MoS2:Ti-Coated Duplex System for Dry-Running Friction Contacts. Lubricants. 10 (10), 229.

Hesselmann, M., Knoop, D., Epp, J., Uhlenwinkel, V., von Hehl, A., Tönjes, A. 2022.
Effect of precipitation-forming elements in a near-eutectic Al-Ce alloy for Laser Powder Bed Fusion. Additive Manufacturing. 57 , DOI: 10.1016/j.addma.2022.102959. OPEN ACCESS

Frerichs, F., Tausendfreund, A., Lübben, T. 2022.
Comparison of temperature and displacement measurements with load simulations for the determination of Process Signatures. Procedia CIRP. 108 , 335-340. DOI: 10.1016/j.procir.2022.03.056. OPEN ACCESS

Hettig, M., Meyer, D. 2022.
Microstructural influence of consecutive deep rolling of AISI 4140. Procedia CIRP. 108 , 164-169. DOI: 10.1016/j.procir.2022.03.029. OPEN ACCESS

Friederici, V., Schumacher, J., Clausen, B. 2022.
Crack propagation modelling for service life prediction of large slewing bearings. Procedia Structural Integrity. 35 , 106-114.

Li, J., Li, L.-Y., Jia, P., Okulov, I. 2022.
Electrochemical Behavior of Nanoporous Gold/Polypyrrole Supercapacitor under Deformation. Nanomaterials. 12 (13), 2149. DOI: 10.3390/nano12132149. OPEN ACCESS

Suwanpinij, P., Bambach, M., Bootchanont, A., Sailuam, W. 2022.
Local Structure Investigation of Cu Precipitates in Modified 18CrNiMo7-6 Steels by Synchrotron X-ray Absorption Spectroscopy. ISIJ - Iron and Steel Institute of Japan - International. 62 (5), 977-983. DOI: 10.2355/isijinternational.ISIJINT-2021-409. OPEN ACCESS

Suwanpinij, P., Dickert, H. H. 2022.
A Control-Cooled Hot-Forged Medium Carbon V-Microalloyed Steel: Strengthening Breakdown in Conjunction with the Synchrotron X-Ray Absorption Spectroscopy. steel research international. 93 (6), 2100428. DOI: 10.1002/srin.202100428. OPEN ACCESS

Suwanpinij, P., Thonondaeng, T., Kumma, P., Suksawat, B., Lothongkum, G. 2022.
Control of the bainitic structure for a wear-resisting hard-faced rail track. Materials Testing. 64 (1), 1-10. DOI: 10.1515/mt-2021-2076.

Li, M., Karpuschewski, B., Riemer, O. 2022.
Controllable shearing chain-thickening polishing process for machining of barium borate. CIRP Journal of Manufacturing Science and Technology. 37 , 291-301. DOI: 10.1016/j.cirpj.2022.02.005.

Hoffmann, R., Naatz, H., Hartwig, A. 2022.
In situ polymerization monitoring of a diacrylate in an electrically conducting mesoporous nanoparticle scaffold. Journal of Materials Science. , DOI: 10.1007/s10853-021-06634-2. OPEN ACCESS

Hoja, S., Geitner, M., Zornek, B., Hoffmann, F., Tobie, T., Stahl, K., Fechte-Heinen, R. 2022.
Influence of the Nitrided Layer Structure on the Micro-Pitting and Wear Behavior of Slow-Running Nitrided External Gears. Lubricants. 10 (5), DOI: 10.3390/lubricants10050088. OPEN ACCESS

Rößler, M., Jedamski, R., Heinzel, J., Karpuschewski, B., Epp, J., Dix, M. 2022.
Method for monitoring the workpiece‘s surface integrity during non-circular grinding.WT Werkstattstechnik WT WERKSTATTSTECHNIK. 112 (11-12), 743-749. DOI: 10.37544/1436-4980-2022-11-12-17. OPEN ACCESS

Hoja, S., Haupt, N., Steinbacher, M., Fechte-Heinen, R. 2022.
Martensitic Induction Hardening of Nitrided Layers*. HTM Journal of Heat Treatment and Materials. 77 (6), 393-408. DOI: 10.1515/htm-2022-1027. OPEN ACCESS

Rößler, M., Jedamski, R., Heinzel, J. Karpuschewski, B., Epp, J., Dix, M. 2022.
Überwachung der Randzone beim Umrundschleifen. WT Werkstatttechnik. 112 (11-12), 743-749. DOI: 10.375544/1436-4980-2022-11-12-17.

Buss, L., Qi, Y., Heidhoff, J., Riemer, O., Fritsching, U. 2022.
Towards an Understanding of Multiphase Fluid Dynamics of a Microfluid Jet Polishing Process: A Numerical Analysis. Fluids. 7 (3), DOI: 10.3390/fluids7030119.

Cenedese, M., Axås, J., Bäuerlein, B., Avila, K., Haller, G. 2022.
Data-driven modeling and prediction of non-linearizable dynamics via spectral submanifolds.Nature Communications Nature communications. 13 (1), 872. DOI: 10.1038/s41467-022-28518-y. OPEN ACCESS

Sandmann, K., Falcone, M., Buss, L., Riefler, N., Abdoly, K., Oltmann, H., Fritsching, U. 2022.
Investigation of Metal Powder Injection into a Combustion Chamber by Large Eddy Simulation for Power to X Studies . Chemie Ingenieur Technik. 95 (1-2), DOI: 10.1002/cite.202200141. OPEN ACCESS

Chouhan, A., Hesselmann, M., Toenjes, A., Mädler, L., Ellendt, N. 2022.
Numerical modelling of in-situ alloying of Al and Cu using the laser powder bed fusion process: A study on the effect of energy density and remelting on deposited track homogeneity. Additive Manufacturing. 59 , DOI: 10.1016/j.addma.2022.103179. OPEN ACCESS

Hussain, S., Buss, L., Yao, D., Fritsching, U., Uhlenwinkel, V. 2022.
Droplet velocity and thermal state from hot gas atomization of steel melt: Impact on the quality of the spray-formed tubular deposit. Advanced Powder Technology. 33 (7), DOI: 10.1016/j.apt.2022.103640.

Schieber, C., Hettig, M., Müller, V., Zaeh, M. F., Heinzel, C. 2022.
Modeling of laser processing as a distortion compensation strategy for profile grinding. Production Engineering. , 47-56. DOI: 10.1007/s11740-022-01144-9. OPEN ACCESS

Schieber, C., Hettig, M., Zaeh, M., Heinzel, C. 2022.
Modeling of Deep Rolling as a Distortion Compensation Strategy during Profile Grinding. Key Engineering Materials. 926 , 897-905. DOI: 10.4028/p-kl033k. OPEN ACCESS

Ivaniski, T. M., de Castro, P., Rodrigues, D., Epp, J., Nunes, R. M., Rocha, A. da S. 2022.
Numerical and Experimental Study of an Industrial Case for Grain Size Evolution in Bainitic Steel in Controlled Hot Forging and its Influence on Mechanical Performance. Materials Research. 25 , DOI: 10.1590/1980-5373-mr-2021-0598.

Schieber, C., Hettig, M., Zaeh, M. F., Heinzel, C. 2022.
Combination of Thermal and Mechanical Strategies to Compensate for Distortion Effects during Profile Grinding. Machines. 10 (12), DOI: 10.3390/machines10121240. OPEN ACCESS

Cui, C., Becker, L., Gärtner, E., Boes, J., Lentz, J., Uhlenwinkel, V., Steinbacher, M., Weber, S., Fechte-Heinen, R. 2022.
Laser Additive Manufacturing of Duplex Stainless Steel via Powder Mixture. Journal of Manufacturing and Materials Processing. 6 (4), DOI: 10.3390/jmmp6040072. OPEN ACCESS

Jedamski, R., Heinzel, J., Karpuschewski, B., Epp, J. 2022.
In-Process Measurement of Barkhausen Noise for Detection of Surface Integrity during Grinding. Applied Sciences. 12 (9), DOI: 10.3390/app12094671. OPEN ACCESS

Wang, Y., Zhou, T., Riemer, O., Heidhoff, J., Li, M., Karpuschewski, B., Gorb, S. N., Schaber, C. F. 2022.
Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions. Tribology International. 176 , DOI: 10.1016/j.triboint.2022.107708.

Joo, S. H., Jeong, Y. B., Wada, T., Okulov, I., Kato, H. 2022.
Inhomogeneous dealloying kinetics along grain boundaries during liquid metal dealloying. Journal of Materials Science and Technology. 106 , 41-48. DOI: 10.1016/j.jmst.2021.07.023.

de Araujo, A. P. M., Kiminami, C. S., Uhlenwinkel, V., Gargarella, P. 2022.
Processability of recycled quasicrystalline Al-Fe-Cr-Ti composites by selective laser melting - A statistical approach. Materialia. 22 , 101377. DOI: 10.1016/j.mtla.2022.101377. OPEN ACCESS

Meyer, D., Schumski, L., Guba, N., Espenhahn, B., Hüsemann, T. 2022.
Relevance of the region of interaction between the tool and the metalworking fluid for the cooling effect in grinding. CIRP Annals - Manufacturing Technology. 71 (1), 301-304. DOI: 10.1016/j.cirp.2022.04.055.

Dickert, H. H., Suwanpinij, P., Bleck, W. 2022.
Study of Intercritical Annealing in Air-Cooled Fe-Mn-Al-C Lightweight Forging Steel for Tailoring the Mechanical Properties.Steel Research International steel research international. 93 (6), DOI: 10.1002/srin.202100622. OPEN ACCESS

Gäßler, M., Stahl, J., Schowalter, M., Pokhrel, S., Rosenauer, A., Mädler, L., Güttel, R. 2022.
The Impact of Support Material of Cobalt-Based Catalysts Prepared by Double Flame Spray Pyrolysis on CO2 Methanation Dynamics. ChemCatChem. 14 (16), e202200286. DOI: 10.1002/cctc.202200286. OPEN ACCESS

Altmann, M., Bosse, S., Werner, C., Fechte-Heinen, R., Tönjes, A. 2022.
Programmable Density of Laser Additive Manufactured Parts by Considering an Inverse Problem. Materials. PMC9605122 (20), DOI: 10.3390/ma15207090. OPEN ACCESS

Mikulewitsch, M., Dong, J., Stöbener, D., Epp, J., Fischer, A. 2022.
Influences on Quantitative Nitriding Layer Thickness Measurements using Model-Based Photothermal Radiometry*. HTM Journal of Heat Treatment and Materials. 77 (5), 357-373. DOI: 10.1515/htm-2022-1024.

Aouane, O., Sega, M., Bäuerlein, B., Avila, K., Harting, J. 2022.
Inertial focusing of a dilute suspension in pipe flow. Physics of Fluids. 34 (11), 113312. DOI: 10.1063/5.0111680. OPEN ACCESS

Karpuschewski, B., Kinner-Becker, T., Klink, A., Langenhorst, L., Mayer, J., Meyer, D., Radel, T., Reese, S., Sölter, J. 2022.
Process Signatures–Knowledge-based approach towards function-oriented manufacturing. Procedia CIRP. 108 , 624-629. DOI: 10.1016/j.procir.2022.01.001. OPEN ACCESS

Karpuschewski, B., Kotsun, Y., Maiboroda, V., Borysenko, D., Herbster, M., Sölter, J. 2022.
Magnetic-abrasive machining in manufacturing of medical implants. Procedia CIRP. 108 , 577-582. DOI: 10.1016/j.procir.2022.03.091. OPEN ACCESS

Schönemann, L., Riemer, O., Karpuschewski, B., Schreiber, P., Klemme, H., Denkena, B. 2022.
Digital surface twin for ultra-precision high performance cutting. Precision Engineering. 77 , 349-359. DOI: 10.1016/j.precisioneng.2022.06.010.

Barbieri, M., Avila, K., Achelis, L., Utzig, J., Meier, H., Fritsching, U. 2022.
Effect of non-axisymmetric inlet ports and operating conditions on drop dynamics of an internal mixing atomizer. Atomization and Sprays. 33 (2), 29. DOI: 10.1615/AtomizSpr.2022042993.

Schumski, L., Guba, N., Espenhahn, B., Stöbener, D., Fischer, A., Meyer, D. 2022.
Characterization of the Interaction of Metalworking Fluids with Grinding Wheels. Journal of Manufacturing and Materials Processing. 6 (3), 51. DOI: 10.3390/jmmp6030051. OPEN ACCESS

Wollborn, T., Michaelis, M., Ciacchi, L. C., Fritsching, U. 2022.
Protein conformational changes at the oil/water-interface induced by premix membrane emulsification. Journal of Colloid and Interface Science. 628 (Pt A), 72-81. DOI: 10.1016/j.jcis.2022.07.132. OPEN ACCESS

Klotz, L., Lemoult, G., Avila, K., Hof, B. 2022.
Phase Transition to Turbulence in Spatially Extended Shear Flows. Physical Review Letters. 128 (1), 014502. DOI: 10.1103/PhysRevLett.128.014502.

Eich, M., Karahan, A., Ljatifi, B., Langenhorst, L., Meyer, D., Heinzel, C. 2022.
Simulation of internal material loads caused by simultaneous contacts in grinding with predominantly mechanical impact. Procedia CIRP. 108 , 352-357. DOI: 10.1016/j.procir.2022.03.058. OPEN ACCESS

Elberskirch, L., Binder, K., Riefler, N., Sofranko, A., Liebing, J., Minella, C. B., Mädler, L., Razum, M., van Thriel, C., Unfried, K., Schins, R. P. F., Kraegeloh, A. 2022.
Digital research data: from analysis of existing standards to a scientific foundation for a modular metadata schema in nanosafety. Particle and Fibre Toxicology. 19 (1), 1. DOI: 10.1186/s12989-021-00442-x. OPEN ACCESS

Bastiani, F. H., Bianchi Neto, P., Buss, L., Fritsching, U., Noriler, D. 2022.
Modeling the Carbon Black Production in Enclosed FSP Reactor. Journal of Fluid Flow, Heat and Mass Transfer. 9 , 58-65. DOI: 10.11159/jffhmt.2022.008.

Elberskirch, L., Sofranko, A., Liebing, J., Riefler, N., Binder, K., Bonatto Minella, C., Razum, M., Mädler, L., Unfried, K., Schins, R. P. F., Kraegeloh, A., van Thriel, C. 2022.
How Structured Metadata Acquisition Contributes to the Reproducibility of Nanosafety Studies: Evaluation by a Round-Robin Test. Nanomaterials. 12 (7), DOI: 10.3390/nano12071053. OPEN ACCESS

Xu, M., Riemer, O., Nakamoto, K., Takeuchi, Y. 2022.
Automated workpiece setting operation by on-machine measurement for efficient ultraprecision cutting of micro-shapes. Journal of Advanced Mechanical Design, Systems, and Manufacturing. 16 (5), JAMDSM0054-JAMDSM0054. DOI: 10.1299/jamdsm.2022jamdsm0054. OPEN ACCESS

Yao, D., Hussain, S., Buss, L., Uhlenwinkel, V., Fritsching, U. 2022.
A study of the heat transfer of an atomizer gas jet impinging perpendicular on a circular cylinder. International Journal of Thermal Sciences. 176 , 107531. DOI: 10.1016/j.ijthermalsci.2022.107531.

Endres, S., Avila, M., Mädler, L. 2022.
A discrete differential geometric formulation of multiphase surface interfaces for scalable multiphysics equilibrium simulations. Chemical Engineering Science. 257 , 117681. DOI: 10.1016/j.ces.2022.117681. OPEN ACCESS

Becker, L., Boes, J., Lentz, J., Cui, C., Uhlenwinkel, V., Steinbacher, M., Fechte-Heinen, R., Theisen, W., Weber, S. 2022.
Quantification of extremely small-structured ferritic-austenitic phase fractions in stainless steels manufactured by laser powder bed fusion. Materialia. 22 , DOI: 10.1016/j.mtla.2022.101393.

Guba, N., Schumski, L., Paulsen, T., Karpuschewski, B. 2022.
Vibration-assisted deep hole drilling of the aluminum material AlMgSi0.5. CIRP Journal of Manufacturing Science and Technology. 36 , 57-66. DOI: 10.1016/j.cirpj.2021.11.002.

Ostermayer, P., Burkart, K., Blinn, B., Surm, H., Clausen, B., Beck, T. 2022.
Evaluation of the plastic deformation behavior of modified 100Cr6 steels with increased fractions of retained austenite using cyclic indentation tests. Materials Testing. 64 (9), 1298-1312. DOI: 10.1515/mt-2022-0087.

Otani, L. B., Schönemann, L., Karpuschewski, B., Baron, C., Springer, H., Bolfarini, C., Uhlenwinkel, V. 2022.
High Modulus Steel Produced by Cold Spray Additive Manufacturing. Metallurgical and Materials Transactions B. , DOI: 10.1007/s11663-022-02509-2.

Zhang, J. W., Dong, Y. P., Tang, J. C., Wang, D. W., Lu, W. J., Li, Y. L., Wang, D. Y., Okulov, I., Yan, M. 2022.
Additive manufacturing of the high-strength and low modulus biomedical Ti-10 Nb alloy under reactive atmosphere. Materials Today Communications. 33 , 104837. DOI: 10.1016/j.mtcomm.2022.104837.

Soares Barreto, E., Frey, M., Wegner, J., Jose, A., Neuber, N., Busch, R., Kleszczynski, S., Mädler, L., Uhlenwinkel, V. 2022.
Properties of gas-atomized Cu-Ti-based metallic glass powders for additive manufacturing. Materials and Design. 215 , DOI: 10.1016/j.matdes.2022.110519. OPEN ACCESS

Hantke, N., Großwendt, F., Strauch, A., Fechte-Heinen, R., Röttger, A., Theisen, W., Weber, S., Sehrt, J. T. 2022.
Processability of a Hot Work Tool Steel Powder Mixture in Laser-Based Powder Bed Fusion. Materials. 15 (7), DOI: 10.3390/ma15072658. OPEN ACCESS

Zielinski, T., Vovk, A., Riemer, O., Karpuschewski, B. 2022.
Influence of local material loads on surface topography while machining steel 42CrMo4 and Inconel 718.pdf. Procedia CIRP. 108 , 412-417. DOI: 10.1016/j.procir.2022.03.064. OPEN ACCESS

Zmich, R., Mensching, N., Steinbacher, M., Meyer, D. 2022.
Impact of pre-machining on the surface and subsurface characteristics of deep rolled metastable autenitic 18CrNiMo7-6. Procedia CIRP. 108 , 630-635. DOI: 10.1016/j.procir.2022.03.099. OPEN ACCESS

Sommer, M., Epp, J., Steinbacher, M., Fechte-Heinen, R., Hoja, S. 2022.
Variation of the Compound Layer Structure by Controlled Gas Nitriding and Nitrocarburizing. HTM Journal of Heat Treatment and Materials. 77 (3), 214-227. OPEN ACCESS

Esin, V. A., François, M., Belkacemi, L., Irmer, D., Briez, L., Proudhon, H. 2022.
Effect of microstructure on fatigue crack deviation in AA2050-T84. Materials Science and Engineering: A. 858 , DOI: 10.1016/j.msea.2022.144120.

Zuern, M. G., Tapar, O., Ho, P., Epp, J., Gibmeier, J. 2022.
Interrelation between Microstructure and Residual Stresses for Low-Pressure Carburizing of Steel AISI 5120 under Defined Process Parameter Variation. HTM Journal of Heat Treatment and Materials. 77 (1), 29-52. DOI: 10.1515/htm-2022-0002.

Falcone, M., Buss, L., Fritsching, U. 2022.
Model Assessment of an Open-Source Smoothed Particle Hydrodynamics (SPH) Simulation of a Vibration-Assisted Drilling Process. Fluids. 7 (6), DOI: 10.3390/fluids7060189. OPEN ACCESS

Falcone, M., Buss, L., Fritsching, U. 2022.
Eulerian–Lagrangian–Eulerian Simulations of Two-Phase Minimum Quantity Lubrication Flow in Internal Drill Bit Channels. Processes. 10 (3), DOI: 10.3390/pr10030600. OPEN ACCESS

Qi, H., Wang, Y., Qi, Z., Shi, L., Fang, Z., Zhang, L., Riemer, O., Karpuschewski, B. 2022.
A Novel Grain-Based DEM Model for Evaluating Surface Integrity in Scratching of RB-SiC Ceramics. Materials. 15 (23), 16. DOI: 10.3390/ma15238486. OPEN ACCESS

Qi, J. F., Liu, C. Y., Chen, Z. W., Liu, Z. Y., Tian, J. S., Feng, J., Okulov, I., Eckert, J., Wang, P. 2022.
Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticles. Materials Science and Engineering: A. 855 , 143833. DOI: 10.1016/j.msea.2022.143833.

Boinski, A., Adam, B., Vogelsang, A., Schönemann, L., Riemer, O., Karpuschewski, B. 2021.
Micro-Injection Molding of Diffractive Structured Surfaces. Journal of Manufacturing and Materials Processing. 5 (1), 1-10. DOI: 10.3390/jmmp5010012. OPEN ACCESS

Steinbacher, M., Hoja, S. 2021.
Optimization of Pre-Heat Treatment for Nitriding. Materials. 14 (24), DOI: 10.3390/ma14247766. OPEN ACCESS

Heinzel, J., Jedamski, R., Epp, J., Karpuschewski, B. 2021.
In-process measurement of Barkhausen noise and resulting productivity increase potential in grinding of case hardened steel. CIRP Journal of Manufacturing Science and Technology. 32 , 37-45. DOI: 10.1016/j.cirpj.2020.11.011.

Borchers, F., Clausen, B., Ehle, L. C., Eich, M., Epp, J., Frerichs, F., Hettig, M., Klink, A., Kohls, E., Lu, Y., Meyer, H., Rommes, B., Schneider, S., Strunk, R., Zielinski, T. 2021.
The Influence of Former Process Steps on Changes in Hardness, Lattice and Micro Structure of AISI 4140 Due to Manufacturing Processes. Metals. 11 (7), 1102. DOI: 10.3390/met11071102. OPEN ACCESS

Frerichs, F., Lu, Y., Lübben, T., Radel, T. 2021.
Process Signature for Laser Hardening. Metals. 11 (3), DOI: 10.3390/met11030465. OPEN ACCESS

Borysenko, D., Welzel, F., Karpuschewski, B., Kundrák, J., Voropai, V. 2021.
Simulation of the burnishing process on real surface structures. Precision Engineering. 68 , 166-173. DOI: 10.1016/j.precisioneng.2020.12.004.

Stodt, M. F. B., Wriedt, T., Kiefer, J., Fritsching, U. 2021.
Theoretical investigation of global rainbow refractometry in spray combustion of polydisperse microdroplets. Journal of Modern Optics. 68 (5), 259-266.

Strauch, A. L., Uhlenwinkel, V., Steinbacher, M., Großwendt, F., Röttger, A., Chehreh, A. B., Walther, F., Fechte-Heinen, R. 2021.
Comparison of the Processability and Influence on the Microstructure of Different Starting Powder Blends for Laser Powder Bed Fusion of a Fe3.5Si1.5C Alloy. Metals. 11 (7), 1107. DOI: 10.3390/met11071107. OPEN ACCESS

Li, H., Erinmwingbovo, C., Birkenstock, J., Schowalter, M., Rosenauer, A., La Mantia, F., Mädler, L., Pokhrel, S. 2021.
Double Flame Fabricated High-Performance AlPO4/LiMn2O4 Cathode Material for Li-Ion Battery. ACS Applied Energy Materials. 4 , 4428–4443.

Li, H., Erinmwingbovo, C., Birkenstock, J., Schowalter, M., Rosenauer, A., La Mantia, F., Mädler, L., Pokhrel, S. 2021.
Double Flame-Fabricated High-Performance AlPO4/LiMn2O4 Cathode Material for Li-Ion Batteries. ACS Applied Energy Materials. , DOI: 10.1021/acsaem.1c00024. OPEN ACCESS

Strunk, R., Borchers, F., Clausen, B., Heinzel, C. 2021.
Influence of Subsequently Applied Mechanical and Thermal Loads on Surfaces Ground with Mechanical Main Impact. Materials. PMC8125391 (9), DOI: 10.3390/ma14092386. OPEN ACCESS

Friederici, V., Schumacher, J., Clausen, B. 2021.
Influence of local differences in microstructure and hardness on the fatigue behaviour of a slewing bearing steel. Procedia Structural Integrity. 31 , 8-14. DOI: 10.1016/j.prostr.2021.03.003.

Li, H., Riefler, N., Wriedt, T., Mädler, L. 2021.
Reference data set for three-dimensional measurements of double droplet combustion of p-xylene. Proceedings of the Combustion Institute. 38 (2), 3151-3158. DOI: 10.1016/j.proci.2020.06.297.

Surm, H. 2021.
Advanced Distortion Analysis of Heat Treated Rings Erweiterte Verzugsanalyse wärmebehandelter Ringe. HTM Journal of Heat Treatment and Materials. 76 (6), 432-444. DOI: 10.1515/htm-2021-0019.

Li, M., Karpuschewski, B., Ohmori, H., Riemer, O., Wang, Y. Q., Dong, T. 2021.
Adaptive shearing-gradient thickening polishing (AS-GTP) and subsurface damage inhibition. International Journal of Machine Tools and Manufacture. , 23. DOI: 10.1016/j.ijmachtools.2020.103651.

Li, M., Karpuschewski, B., Riemer, O. 2021.
High-efficiency nano polishing of steel materials. Nanotechnology Reviews. 10 (1), 1329–1338. DOI: 10.1515/ntrev-2021-0092.

Swanson, H. L., Pokhrel, S., Davidowski, S. K., Mädler, L., Brinker, C. J., Holland, G. P. 2021.
The Impact of Metal Doping on Fumed Silica Structure and Amino Acid Thermal Condensation Catalytic Properties. Journal of Materials Science. 56 , 16916–16927.

Swapnasrita, S., Albinsson, D., Pesch, G.R., Ström, H., Langhammer, C., Mädler, L. 2021.
Unravelling CO oxidation reaction kinetics on single Pd nanoparticles in nanoconfinement using a nanofluidic reactor and DSMC simulations. Chemical Engineering Science. 9 , 15. DOI: 10.1016/j.cesx.2021.100088. OPEN ACCESS

Li, M., Liu, M., Riemer, O., Karpuschewski, B., Tang, C. 2021.
Origin of material removal mechanism in shear thickening-chemical polishing. International Journal of Machine Tools and Manufacture. 170 , DOI: 10.1016/j.ijmachtools.2021.103800.

Tapar, O., Epp, J., Steinbacher, M., Gibmeier, J. 2021.
In-Situ Synchrotron X-ray Diffraction Investigation of Microstructural Evolutions During Low-Pressure Carburizing. Metallurgical and Materials Transactions A. 52 (4), 1427-1442. DOI: 10.1007/s11661-021-06171-2. OPEN ACCESS

Tapar, O., Steinbacher, M., Gibmeier, J., Epp, J. 2021.
Investigation of the Effects of Low-Pressure Carburizing Process Parameters on Microstructural Evolution by Means of In Situ Synchrotron X-Ray Diffraction. Advanced Engineering Materials. , 19. DOI: 10.1002/adem.202100124. OPEN ACCESS

Tapar, O., Steinbacher, M., Gibmeier, J., Schell, N., Epp, J. 2021.
In situ Investigation during Low Pressure Carburizing by Means of Synchrotron X-ray Diffraction In-situ-Untersuchung während der Niederdruck aufkohlung mittels Synchrotron-Röntgenbeugung. HTM Journal of Heat Treatment and Materials. 76 (6), 417-431. DOI: 10.1515/htm-2021-0018.

Lin, M., Zimmermann, C., Wang, K., Hunkel, M., Prahl, U., Spatschek, R. 2021.
Modeling Bainitic Transformations during Press Hardening. Materials. PMC7867011 (3), 1-27. DOI: 10.3390/ma14030654. OPEN ACCESS

Sackmann, D., Heinzel, J., Karpuschewski, B. 2021.
Influence of the Material State of Ground, Case-Hardened Steels on the Barkhausen Noise Depending on the Surface Integrity. HTM Journal of Heat Treatment and Materials. 76 (1), 5-18. DOI: 10.1515/htm-2020-0001.

Hoja, S., Klümper-Westkamp, H., Steinbacher, M. 2021.
Carbonitriding of Forging Dies. Metals. 11 (10), DOI: 10.3390/met11101651. OPEN ACCESS

Hoja, S., Nadolski, D., Steinbacher, M., Fechte-Heinen, R. 2021.
Optimized Nitriding for Subsequent Induction Heat Treatment. HTM Journal of Heat Treatment and Materials. 76 (4), 261-272. DOI: 10.1515/htm-2021-0008.

Turra, C. J., de Castro, P., Silveira, A. F., Rocha, A. da S. 2021.
Análise via microscopia óptica de um aço bainítico DIN 18MnCrSiMo6-4 austenitizado e resfriado em diferentes meios. Tecnologia em Metalurgia, Materiais e Mineração. 18 , DOI: 10.4322/2176-1523.20212297. OPEN ACCESS

Vanselow, C., Espenhahn, B., Schumski, L., Stöbener, D., Meyer, D., Fischer, A. 2021.
Flow field measurement of the cooling lubricant supply at the grinding wheel. Technisches Messen. 88 (12), 785-794. DOI: 10.1515/teme-2021-0098. OPEN ACCESS

Hunkel, M. 2021.
Segregations in Steels during Heat Treatment – A Consideration along the Process Chain Seigerungen in Stählen während der Wärmebehandlung – Eine Betrachtung entlang der Prozesskette. HTM Journal of Heat Treatment and Materials. 76 (2), 79-104. DOI: 10.1515/htm-2020-0006.

Castens, M., Hoja, S., Surm, H., Hoffmann, F., Fechte-Heinen, R., Steinbacher, M. 2021.
Hydrogen Absorption during Case Hardening of Steels EN20MnCr5 (SAE5120) and EN18CrNiMo7-6 (SAE4820). Metals. 12 (1), DOI: 10.3390/met12010006. OPEN ACCESS

Luhede, L., Besser, B., Schumacher, D., Wilhelm, M., Fritsching, U. 2021.
Continuous Multistep Encapsulation Process for the Generation of Multiple Emulsions. Chemical Engineering and Technology. 44 (1), 15-22.

Charni, D., Ortmann-Ishkina, S., Herrmann, M., Schenck, C., Epp, J. 2021.
Mechanical properties of rotary swaged steel components. Forschung im Ingenieurwesen. 85 (3), 723-732. DOI: 10.1007/s10010-021-00498-3. OPEN ACCESS

Chehreh, A. B., Strauch, A., Grosswendt, F., Rottger, A., Fechte-Heinen, R., Theisen, W., Walther, F. 2021.
Influence of Different Alloying Strategies on the Mechanical Behavior of Tool Steel Produced by Laser-Powder Bed Fusion. Materials. PMC8233732 (12), 3344. DOI: 10.3390/ma14123344. OPEN ACCESS

Vovk, A., Glüge, R., Karpuschewski, B., Sölter, J. 2021.
Kinematic hardening in steel 42crmo4.WT Werkstattstechnik WT WERKSTATTSTECHNIK. 111 (9), 612-616. DOI: 10.37544/1436-4980-2021-09-38.

Vovk, A., Pourkaveh Dehkordi, A., Glüge, R., Karpuschewski, B., Sölter, J. 2021.
Modification of the Johnson–Cook Material Model for Improved Simulation of Hard Milling High-Performance Steel Components. Applied Mechanics. 2 (3), 571-580. DOI: 10.3390/applmech2030032. OPEN ACCESS

Vovk, A., Sölter, J., Karpuschewski, B. 2021.
Numerical investigation of the influence of multiple loads on material modifications during hard milling. Procedia CIRP. 102 , 500-505. DOI: 10.1016/j.procir.2021.09.085. OPEN ACCESS

Schalk, M., Pokhrel, S., Schowalter, M., Rosenauer, A., Mädler, L. 2021.
Control of Porous Layer Thickness in Thermophoretic Deposition of Nanoparticles. Materials. 14 (9), DOI: 10.3390/ma14092395. OPEN ACCESS

Schieber, C., Hettig, M., Zaeh, M. F., Heinzel, C. 2021.
Evaluation of approaches to compensate the thermo-mechanical distortion effects during profile grinding. Procedia CIRP. 102 , 331-336. DOI: 10.1016/j.procir.2021.09.057.

Cui, C., Dong, J., Epp, J., Schulz, A., Steinbacher, M., Acar, S., Herbst, S., Maier, H. J. 2021.
In Situ X-Ray Diffraction Analysis of Microstructure Evolution during Deep Cryogenic Treatment and Tempering of Tool Steels. steel research international. 92 (12), 2100076. DOI: 10.1002/srin.202100076. OPEN ACCESS

Jedamski, R., Epp, J. 2021.
Non-Destructive Micromagnetic Determination of Hardness and Case Hardening Depth Using Linear Regression Analysis and Artificial Neural Networks. Metals. 11 (1), 1-20. DOI: 10.3390/met11010018. OPEN ACCESS

Meierhofer, F., Fritsching, U. 2021.
Synthesis of Metal Oxide Nanoparticles in Flame Sprays: Review on Process Technology, Modeling, and Diagnostics. Energy and Fuels. 35 (7), 5495-5537. OPEN ACCESS

Jeong, Y. B., Wada, T., Joo, S.-H., Park, J.-M., Kim, H. S., Okulov, I., Kim, K. B., Kato, H. 2021.
Hierarchical heterostructured FeCr–(Mg–Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying. Journal of Materials Research and Technology. 15 , 4573-4579. DOI: 10.1016/j.jmrt.2021.10.080.

Jeong, Y. B., Wada, T., Joo, S.-H., Park, J.-M., Moon, J., Kim, H. S., Okulov, I., Park, S. H., Lee, J. H., Kim, K. B., Kato, H. 2021.
Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying. Composites Part B: Engineering. 225 , DOI: 10.1016/j.compositesb.2021.109266.

Schneider, S., Vorspohl, J., Frerichs, F., Klink, A., Meinke, M., Schröder, W., Lübben, T. 2021.
Investigation on residual stress induced by multiple EDM discharges. Procedia CIRP. 102 , 482-487. DOI: 10.1016/j.procir.2021.09.082. OPEN ACCESS

Mensching, N., Sonnenberg, H., Meyer, D., Clausen, B. 2021.
Particle-oriented peening as method to investigate the material dependent deformation behaviour. Journal of Materials Processing Technology. 289 , 11. DOI: 10.1016/j.jmatprotec.2020.116960.

Joo, S.-H., Kato, H., Okulov, I. 2021.
Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying. Composites Part B: Engineering. 222 , DOI: 10.1016/j.compositesb.2021.109044.

Joo, S.-H., Okulov, I., Kato, H. 2021.
Unusual two-step dealloying mechanism of nanoporous TiVNbMoTa high-entropy alloy during liquid metal dealloying. Journal of Materials Research and Technology. 14 , 2945-2953. DOI: 10.1016/j.jmrt.2021.08.100. OPEN ACCESS

Damon, J. M., Surm, H., Saddei, P., Dietrich, S., Schulze, V. 2021.
Experimental and Numerical Investigation of the Surface Layer Conditions after Carbonitriding of Powder Metallurgical Steels. Part 1: Diffusion in Components of Graded Porosity Experimentelle und numerische Untersuchung der Randschichtzustände nach dem C. HTM Journal of Heat Treatment and Materials. 76 (1), 36-57. DOI: 10.1515/htm-2020-0003.

Meyer, D., Hettig, M., Mensching, N. 2021.
Pulsed Mechanical Surface Treatment—An Approach to Combine the Advantages of Shot Peening, Deep Rolling, and Machine Hammer Peening. Journal of Manufacturing and Materials Processing. 5 (3), 18. DOI: 10.3390/jmmp5030098. OPEN ACCESS

de Araujo, A. P. M., Pauly, S., Batalha, R. L., Coury, F. G., Kiminami, C. S., Uhlenwinkel, V., Gargarella, P. 2021.
Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility. Additive Manufacturing. , 101960.

de Castro, P., Silveira, A. C. de Figueiredo, Ivaniski, T. M., Turra, C. J., Epp, J., Rocha, A. da Silva 2021.
Two-Step Continuous Cooling Heat Treatment Applied in a Low Carbon Bainitic Steel. Materials Research. 24 (2), DOI: 10.1590/1980-5373-mr-2020-0334. OPEN ACCESS

De Luca, A., Ianus, A., Leemans, A., Palombo, M., Shemesh, N., Zhang, H., Alexander, D. C., Nilsson, M., Froeling, M., Biessels, G.-J., Zucchelli, M., Frigo, M., Albay, E., Sedlar, S., Alimi, A., Deslauriers-Gauthier, S., Deriche, R., Fick, R., Afzali, M., Pieciak, T., Bogusz, F., Aja-Fernández, S., Özarslan, E., Jones, D. K., Chen, H., Jin, M., Zhang, Z., Wang, F., Nath, V., Parvathaneni, P., Morez, J., Sijbers, J., Jeurissen, B., Fadnavis, S., Endres, S., Rokem, A., Garyfallidis, E., Sanchez, I., Prchkovska, V., Rodrigues, P., Landman, B. A., Schilling, K. G. 2021.
On the generalizability of diffusion MRI signal representations across acquisition parameters, sequences and tissue types: Chronicles of the MEMENTO challenge. NeuroImage. 240 , 118367. DOI: 10.1016/j.neuroimage.2021.118367.

Kagathara, J., Lübben, T. 2021.
Numerical Study to Understand the Distortion Behavior of a Weight-Reduced Counter Gear Numerische Studie zum Verständnis des Verzugsverhaltens eines gewichtsreduzierten Vorgelegerads. HTM Journal of Heat Treatment and Materials. 76 (2), 132-154. DOI: 10.1515/htm-2020-0009.

Meyer, D., Schönemann, L., Mensching, N., Uhlenwinkel, V., Karpuschewski, B. 2021.
Sequential Processing of Cold Gas Sprayed Alloys by Milling and Deep Rolling. Materials. 14 (13), DOI: 10.3390/ma14133699. OPEN ACCESS

Kagathara, J., Lübben, T., Steinbacher, M. 2021.
Effect of Design Modification on the Distortion Behavior of a Complex Counter Gear. Materials. PMC8074177 (8), DOI: 10.3390/ma14082022. OPEN ACCESS

Gansel, R., Zimmermann, C., Fricke, L. V., Lüdtke, M., Klümper-Westkamp, H., Fechte-Heinen, R., Maier, H. J., Zaremba, D. 2021.
Characterization of Graded Subsurface Zones in Industrial Case-Hardening Using a Non-Destructive Testing System Charakterisierung gradiert eingestellter Randzonen beim industriellen Einsatzhärten mithilfe eines zerstörungsfreien Prüfsystems. HTM Journal of Heat Treatment and Materials. 76 (3), 237-245. DOI: 10.1515/htm-2021-0006.

Döbberthin, C., Herbster, M., Karpuschewski, B. 2021.
A novel approach for a modular taper junction in hip stems using turn-milling. CIRP Journal of Manufacturing Science and Technology. 33 , 256-263. DOI: 10.1016/j.cirpj.2021.03.001.

Meyer, I., Rentsch, R., Karpuschewski, B. 2021.
Universal approach for simulation and analysis of cutting edge engagement in orbital drilling processes. CIRP Journal of Manufacturing Science and Technology. 32 , 346-355. DOI: 10.1016/j.cirpj.2021.01.008.

Karimi, J., Suryanarayana, C., Okulov, I., Prashanth, K. G. 2021.
Selective laser melting of Ti6Al4V: Effect of laser re-melting. Materials Science and Engineering: A. 805 , 1-11. DOI: 10.1016/j.msea.2020.140558.

Geitner, M., Zornek, B., Hoja, S., Tobie, T., Stahl, K. 2021.
Investigations on the Micro-Pitting and Wear Behavior of Nitrided Internal Gears. IOP Conference Series: Materials Science and Engineering. 1097 (1), DOI: 10.1088/1757-899x/1097/1/012005. OPEN ACCESS

Avila, K., Hof, B. 2021.
Second-order phase transition in counter-rotating taylor-couette flow experiment. Entropy. PMC7823695 (1), DOI: 10.3390/e23010058. OPEN ACCESS

Karpuschewski, B., Lübben, T., Meinke, M., Eckert, S., Frerichs, F., Schneider, S., Klink, A., Langenhorst, L., Sölter, J. 2021.
Comparison of Process Signatures for thermally dominated processes. CIRP Journal of Manufacturing Science and Technology. 35 , 217-235. DOI: 10.1016/j.cirpj.2021.06.013. OPEN ACCESS

Ghavidel, A., Hosseinpourpia, R., Gelbrich, J., Bak, M., Sandu, I. 2021.
Microstructural and Chemical Characteristics of Archaeological White Elm (Ulmus laevis P.) and Poplar (Populus spp.). Applied Sciences. 11 (21), DOI: 10.3390/app112110271. OPEN ACCESS

Gianoglio, D., Ciftci, N., Armstrong, S., Uhlenwinkel, V., Battezzati, L. 2021.
On the cooling rate-microsturcture relationship in molten metal gas atomization. Metallurgical and Materials Transactions A. 52 , 3750–3758. DOI: 10.1007/s11661-021-06325-2. OPEN ACCESS

Balakrishnan, A., Groeneveld, J., Pokhrel, S., Mädler, L. 2021.
Metal Sulfide Nanoparticles: Precursor Chemistry. Chemistry - A European Journal. 27 (21), 6390-6406. DOI: 10.1002/chem.202004952. OPEN ACCESS

Wollborn, T., Giefer, P., Kieserling, H., Wagemans, A. M., Drusch, S., Fritsching, U. 2021.
Investigation of local and temporal interfacial shear stress distribution during membrane emulsification. The Canadian Journal of Chemical Engineering. 100 (5), 1061-1078. DOI: 10.1002/cjce.24186. OPEN ACCESS

Gierden, C., Kochmann, J., Waimann, J., Kinner-Becker, T., Sölter, J., Svendsen, B., Reese, S. 2021.
Efficient two-scale FE-FFT-based mechanical process simulation of elasto-viscoplastic polycrystals at finite strains. Computer Methods in Applied Mechanics and Engineering. 374 , 1-18. DOI: 10.1016/j.cma.2020.113566. OPEN ACCESS

Kiefer, J., Stodt, M. F. B., Fritsching, U. 2021.
Thermometry by vibrational Raman spectroscopy of nitrogen: Identification and impact of spatial averaging effects. Journal of Raman Spectroscopy. 52 (9), 1582-1588. DOI: 10.1002/jrs.6104. OPEN ACCESS

Kieserling, H., Giefer, P., Uttinger, M. J., Lautenbach, V., Nguyen, T., Sevenich, R., Lubbert, C., Rauh, C., Peukert, W., Fritsching, U., Drusch, S., Wagemans, A. M. 2021.
Structure and adsorption behavior of high hydrostatic pressure-treated beta-lactoglobulin. Journal of Colloid and Interface Science. 596 , 173-183.

Schumacher, J., Clausen, B. 2021.
Calculation of the Fatigue Limit of High‐Strength Steel Specimens at Different Loading Conditions Based on Inclusion Sizes. steel research international. , DOI: 10.1002/srin.202100252. OPEN ACCESS

Kinner-Becker, T., Hettig, M., Sölter, J., Meyer, D. 2021.
Analysis of internal material loads and Process Signature Components in deep rolling. CIRP Journal of Manufacturing Science and Technology. 35 , 400-409. DOI: 10.1016/j.cirpj.2021.06.024. OPEN ACCESS

Kinner-Becker, T., Zmich, R., Sölter, J., Meyer, D. 2021.
Combined laser and deep rolling process as a means to study thermo-mechanical processes. Procedia CIRP. 102 , 369-374. DOI: 10.1016/j.procir.2021.09.063. OPEN ACCESS

Schumski, L., Paulsen, T., Sölter, J., Karpuschewski, B. 2021.
Finite element simulation of low frequency vibration-assisted drilling with modification of oscillation modes. Procedia CIRP. 102 , 168-173. DOI: 10.1016/j.procir.2021.09.029. OPEN ACCESS

Ehle, L. C., Harst, S., Meyer, H., Schupp, A., Beyss, O., Rommes, B., Klink, A., Schwedt, A., Zander, D., Weirich, T. E., Mayer, J. 2021.
Microstructural and chemical surface and rim zone changes of ferrite‐perlite 42CrMo4 steel after electrochemical machining. Materialwissenschaft und Werkstofftechnik. 52 (11), 1214-1229. DOI: 10.1002/mawe.202100087.

Ehle, L. C., Spille, J., Meyer, H., Kämmler, J., Werner, J., Schwedt, A., Epp, J., Weirich, T. E., Mayer, J. 2021.
Controlled twinning and martensitic transformation in metastable AISI D3 (X210Cr12) steel by sequential deep rolling and liquid nitrogen cooling. Materials Today Communications. 28 , DOI: 10.1016/j.mtcomm.2021.102484.

Gomes, S. I. L., Amorim, M. J. B., Pokhrel, S., Mädler, L., Fasano, M., Chiavazzo, E., Asinari, P., Janes, J., Tamm, K., Burk, J., Scott-Fordsmand, J. J. 2021.
Machine learning and materials modelling interpretation of in vivo toxicological response to TiO2 nanoparticles library (UV and non-UV exposure). Nanoscale. 13 (35), 14666-14678. DOI: 10.1039/d1nr03231c.

Ehtemam-Haghighi, S., Attar, H., Okulov, I., Dargusch, M. S., Kent, D. 2021.
Microstructural evolution and mechanical properties of bulk and porous low-cost Ti-Mo-Fe alloys produced by powder metallurgy. Journal of Alloys and Compounds. 853 , 1-11. DOI: 10.1016/j.jallcom.2020.156768.

Eich, M., Borchers, F., Langenhorst, L., Karahan, A., Heinzel, C. 2021.
Simulation of internal material loads caused by multiple contacts in grinding with predominantly mechanical impact. Procedia CIRP. 102 , 55-60. DOI: 10.1016/j.procir.2021.09.010. OPEN ACCESS

Gräbner, D., Zielinski, T., Vovk, A., Riemer, O., Karpuschewski, B., Lang, W. 2021.
An Investigation on High-Resolution Temperature Measurement in Precision Fly-Cutting. Sensors. PMC7926914 (4), 1-13. DOI: 10.3390/s21041530. OPEN ACCESS

Xi, L., Ding, K., Gu, D. D., Guo, S., Cao, M., Zhuang, J., Lin, K., Okulov, I., Sarac, B., Eckert, J., Prashanth, K. 2021.
Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements. Journal of Alloys and Compounds. 870 , DOI: 10.1016/j.jallcom.2021.159436.

Ellendt, N., Clausen, B., Mensching, N., Meyer, D., Plump, C., Sonnenberg, H., Steinbacher, M., Tönjes, A. 2021.
Experimental Methods to Enable High-Throughput Characterization of New Structural Materials. JOM - Journal of The Minerals, Metals & Materials Society. 73 (11), 3347-3355. DOI: 10.1007/s11837-021-04901-w. OPEN ACCESS

Ellendt, N., Fabricius, F., Tönjes, A. 2021.
PoreAnalyzer—An Open-Source Framework for the Analysis and Classification of Defects in Additive Manufacturing. Applied Sciences. 11 (13), 6086. DOI: 10.3390/app11136086. OPEN ACCESS

Yan, J., Efremenko, D. S., Vasilyeva, A. A., Doicu, A., Wriedt, T., Wirth, C. 2021.
Scattering Morphology Resolved Total Internal Reflection Microscopy (SMR-TIRM) Of Colloidal Spheres. Computational Mathematics and Modeling. 32 (1), 86-93. DOI: 10.1007/s10598-021-09518-x. OPEN ACCESS

Bäuerlein, B., Avila, K. 2021.
Phase lag predicts nonlinear response maxima in liquid-sloshing experiments. Journal of Fluid Mechanics. 925 , DOI: 10.1017/jfm.2021.576. OPEN ACCESS

Großwendt, F., Becker, L., Röttger, A., Chehreh, A. B., Strauch, A. L., Uhlenwinkel, V., Lentz, J., Walther, F., Fechte-Heinen, R., Weber, S., Theisen, W. 2021.
Impact of the Allowed Compositional Range of Additively Manufactured 316L Stainless Steel on Processability and Material Properties. Materials. 14 (15), 4074. DOI: 10.3390/ma14154074. OPEN ACCESS

Großwendt, F., Röttger, A., Strauch, A., Chehreh, A., Uhlenwinkel, V., Fechte-Heinen, R., Walther, F., Weber, S., Theisen, W. 2021.
Additive manufacturing of a carbon-martensitic hot-work tool steel using a powder mixture – Microstructure, post-processing, mechanical properties. Materials Science and Engineering: A. 827 , 14. DOI: 10.1016/j.msea.2021.142038.

Grüne, J. G., Knoop, D., Domagala, T., Hehl, A. 2021.
Laser beam melting of aluminum alloys with hull‐core build strategy by using an initial meso‐scale simulation. Materialwissenschaft und Werkstofftechnik. 52 (1), 8-18. DOI: 10.1002/mawe.201900215.

Okulov, I., Wilmers, J., Joo, S.-H., Bargmann, S., Kim, H. S., Kato, H. 2021.
Anomalous compliance of interpenetrating-phase composite of Ti and Mg synthesized by liquid metal dealloying. Scripta Materialia. 194 , 1-5. DOI: 10.1016/j.scriptamat.2020.113660. OPEN ACCESS

Sitzmann, A., Hoja, S., Schurer, S., Tobie, T., Stahl, K. 2021.
Deep nitriding—contact and bending strength of gears with increased nitriding hardening depth. Forschung im Ingenieurwesen. , DOI: 10.1007/s10010-021-00502-w. OPEN ACCESS

Endres, S., Ciacchi, L. C., Mädler, L. 2021.
A review of contact force models between nanoparticles in agglomerates, aggregates, and films. Journal of Aerosol Science. 153 , 1-39. DOI: 10.1016/j.jaerosci.2020.105719. OPEN ACCESS

Ortmann-Ishkina, S., Charni, D., Herrmann, M., Liu, Y., Epp, J., Schenck, C., Kuhfuss, B. 2021.
Development of residual stresses by infeed rotary swaging of steel tubes. Archive of Applied Mechanics. 91 (8), 3637-3647. DOI: 10.1007/s00419-021-01905-5. OPEN ACCESS

Kohls, E., Heinzel, C., Eich, M. 2021.
Evaluation of Hardness and Residual Stress Changes of AISI 4140 Steel Due to Thermal Load during Surface Grinding. Journal of Manufacturing and Materials Processing. 5 (3), DOI: 10.3390/jmmp5030073. OPEN ACCESS

Sklenak, S., Brimmers, J., Brecher, C., Lenz, B., Mehner, A. 2021.
Tribologisches Einsatzverhalten von PVD-Festschmierstoffsystemen im fluidfreien Wälzkontakt. Tribologie und Schmierungstechnik. 68 (3-4), 71-78.

Sklenak, S., Brimmers, J., Brecher, C., Lenz, B., Mehner, A. 2021.
Tribological application behavior of PVD solid lubricant systems in dry rolling-sliding contact. Tribologie und Schmierungstechnik. 68 (3-4), 71-78. DOI: 10.24053/TuS-2021-0023.

Sklenak, S., Brimmers, J., Brecher, C., Lenz, B., Mehner, A. 2021.
Tribologlcal application behavior of PVD solid lubricant systems in dry rolling-sliding contact. Tribologie und Schmierungstechnik. 68 (3-4), 71-78. DOI: 10.24053/TuS-2021-0023. OPEN ACCESS

Zhang, X. X., Knoop, D., Andrä, H., Harjo, S., Kawasaki, T., Lutz, A., Lahres, M. 2021.
Multiscale constitutive modeling of additively manufactured Al–Si–Mg alloys based on measured phase stresses and dislocation density. International Journal of Plasticity. 140 , DOI: 10.1016/j.ijplas.2021.102972.

Zhang, X. X., Lutz, A., Andrä, H., Lahres, M., Sittig, D., Maawad, E., Gan, W. M., Knoop, D. 2021.
An additively manufactured and direct-aged AlSi3.5Mg2.5 alloy with superior strength and ductility: micromechanical mechanisms. International Journal of Plasticity. 146 , DOI: 10.1016/j.ijplas.2021.103083.

Soares Barreto, E., Uhlenwinkel, V., Frey, M., Gallino, I., Busch, R., Lüttge, A. 2021.
Influence of Processing Route on the Surface Reactivity of Cu47Ti33Zr11Ni6Sn2Si1 Metallic Glass. Metals. 11 (8), 1-13. DOI: 10.3390/met11081173. OPEN ACCESS

Bevilaqua, W. L., Epp, J., Meyer, H., Dong, J., Roelofs, H., da Silva Rocha, A., Reguly, A. 2021.
Revealing the Dynamic Transformation of Austenite to Bainite during Uniaxial Warm Compression through In-Situ Synchrotron X-ray Diffraction. Metals. 11 (3), DOI: 10.3390/met11030467. OPEN ACCESS

Krajnik, P., Hashimoto, F., Karpuschewski, B., da Silva, E. J., Axinte, D. 2021.
Grinding and fine finishing of future automotive powertrain components. CIRP Annals - Manufacturing Technology. 70 , 22. DOI: 10.1016/j.cirp.2021.05.002. OPEN ACCESS

Zielinski, T., Vovk, A., Riemer, O., Karpuschewski, B. 2021.
An Investigation on Internal Material Loads and Modifications in Precision Turning of Steel 42CrMo4. Micromachines. PMC8148541 (5), 10. DOI: 10.3390/mi12050526. OPEN ACCESS

Eremin, Y., Doicu, A., Wriedt, T. 2021.
Discrete sources method for investigation of near field enhancement of core-shell nanoparticles on a substrate accounting for spatial dispersion. Journal of Quantitative Spectroscopy and Radiative Transfer. 259 , 1-8. DOI: 10.1016/j.jqsrt.2020.107405.

Zmich, R., Meyer, D. 2021.
Thermal Effects on Surface and Subsurface Modifications in Laser-Combined Deep Rolling. Journal of Manufacturing and Materials Processing. 5 (55), DOI: 10.3390/jmmp5020055. OPEN ACCESS

Binder, K., Bonatto Minella, C., Elberskirch, L., Kraegeloh, A., Liebing, J., Petzold, C., Razum, M., Riefler, N., Schins, R., Sofranko, A., van Thriel, C., Unfried, K. 2021.
Discussion on Existing Standards and Quality Criteria in Nanosafety Research - Summary of the NanoS-QM Expert Workshop. Zenodo. , DOI: 10.5281/zenodo.4584790. OPEN ACCESS

Eremin, Y. A., Fikioris, G., Tsitsas, N. L., Wriedt, T. 2021.
A new method of internal auxiliary source-sinks (MIASS) for two-dimensional interior Dirichlet acoustic problems. Journal of Computational and Applied Mathematics. 386 , 1-16. DOI: 10.1016/j.cam.2020.113231. OPEN ACCESS

Eremin, Y. A., Wriedt, T. 2021.
Generalization of the Optical Theorem to an Arbitrary Multipole Excitation of a Particle near a Transparent Substrate. Mathematics. 9 (24), DOI: 10.3390/math9243244. OPEN ACCESS

Sommer, M., Hoja, S., Steinbacher, M., Fechte-Heinen, R. 2021.
Investigation of Compound Layer Structures after Nitriding and Nitrocarburizing of Quenched and Tempered Steels Untersuchung von Verbindungsschichtstrukturen nach Nitrieren und Nitrocarburieren von Vergütungsstählen. HTM Journal of Heat Treatment and Materials. 76 (3), 219-236. DOI: 10.1515/htm-2021-0005.

Zouros, G. P., Kolezas, G. D., Stefanou, N., Wriedt, T. 2021.
EBCM for Electromagnetic Modeling of Gyrotropic BoRs. IEEE - Institute of Electrical and Electronics Engineers: Transactions on Antennas and Propagation. 69 (9), 6134-6139. DOI: 10.1109/tap.2021.3069589.

Kundrák, J., Karpuschewski, B., Pálmai, Z., Felh ő, C., Makkai, T., Borysenko, D. 2021.
The energetic characteristics of milling with changing cross-section in the definition of specific cutting force by FEM method. CIRP Journal of Manufacturing Science and Technology. 32 , 61-69. DOI: 10.1016/j.cirpj.2020.11.006.

Espenhahn, B., Schumski, L., Vanselow, C., Stöbener, D., Meyer, D., Fischer, A. 2021.
Feasibility of Optical Flow Field Measurements of the Coolant in a Grinding Machine. Applied Sciences. 11 (24), DOI: 10.3390/app112411615. OPEN ACCESS

Kundrák, J., Pálmai, Z., Karpuschewski, B., Felh ő, C ., Makkai, T ., Borysenko, D. 2021.
Force and Temperature Conditions of Face Milling with Varying Chip Quotient as a Function of Angle of Rotation. Manufacturing Technology. 21 (2), 214-222.

Fadnavis, S., Endres, S., Wen, Q., Wu, Y.-C., Cheng, H., Koudoro, S., Rane, S., Rokem, A., Garyfallidis, E. 2021.
Bifurcated Topological Optimization for IVIM. Frontiers in Neuroscience. 15 ,

Hatwig, R. A., Dong, J., Epp, J., Rocha, A. da S. 2021.
Effect of Compressive Deformations on the Final Microstructure of a Low Carbon High Silicon Bainitic Steel Thermomechanically Processed. Materials Research. 24 (1), DOI: 10.1590/1980-5373-mr-2020-0346.

He, T., Ciftci, N., Uhlenwinkel, V., Scudino, S. 2021.
Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders. Journal of Manufacturing and Materials Processing. 5 (1), 1-13. DOI: 10.3390/jmmp5010023. OPEN ACCESS

Sonnenberg, H., Clausen, B. 2021.
Analysis and evaluation of mechanical descriptors from micro compression tests on spherical samples. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. , 12. DOI: 10.1177/1464420721992397.

Böcker, M., Steinbacher, M., Fechte-Heinen, R. 2021.
Visualization of Prior Austenite Grain Boundaries in Low-Carbon Steels. Practical Metallography. 58 (11), 697-714.

Fechte-Heinen, R., Lübben, T. 2021.
Quenching and Distortion Abschreckung und Verzug. HTM Journal of Heat Treatment and Materials. 76 (6), 390-416. DOI: 10.1515/htm-2021-0017.

Kuschel, S., Kinner-Becker, T., Zmich, R., Sölter, J., Meyer, D. 2021.
Modelling and Simulation of Mechanical Loads and Residual Stresses in Deep Rolling at Elevated Temperature. Journal of Manufacturing and Materials Processing. 5 (3), DOI: 10.3390/jmmp5030076. OPEN ACCESS

Heemann, L., Mostaghimi, F., Schob, B., Schubert, F., Kroll, L., Uhlenwinkel, V., Steinbacher, M., Tönjes, A., von Hehl, A. 2021.
Adjustment of Mechanical Properties of Medium Manganese Steel Produced by Laser Powder Bed Fusion with a Subsequent Heat Treatment. Materials. PMC8200226 (11), DOI: 10.3390/ma14113081. OPEN ACCESS

Stahl, J., Ilsemann, J., Pokhrel, S., Schowalter, M., Tessarek, C., Rosenauer, A., Eickhoff, M., Bäumer, M., Mädler, L. 2021.
Comparing co-catalytic effects of ZrOx, SmOx, and Pt on COx methanation over Co-based catalysts prepared by double flame spray pyrolysis. ChemCatChem. 13 (12), 2815-2831. DOI: 10.1002/cctc.202001998. OPEN ACCESS

Filimonov, A., Rogozin, O. A., Dubinin, O. N., Kuzminova, Y. O., Shibalova, A. A., Okulov, I., Akhatov, I. S., Evlashin, S. A. 2021.
Modification of Mechanical Properties in Directed Energy Deposition by a Static Magnetic Field: Experimental and Theoretical Analysis. Materials. PMC8470789 (18), DOI: 10.3390/ma14185190. OPEN ACCESS

Heinzel, C., Heinzel, J., Guba, N., Hüsemann, T. 2021.
Comprehensive analysis of the thermal impact and its depth effect in grinding. CIRP Annals - Manufacturing Technology. 70 (1), 289-292. DOI: 10.1016/j.cirp.2021.04.010.

Filimonov, A., Rogozin, O. A., Firsov, D. G., Kuzminova, Y. O., Sergeev, S. N., Zhilyaev, A. P., Lerner, M. I., Toropkov, N. E., Simonov, A. P., Binkov, I., Okulov, I., Akhatov, I. S., Evlashin, S. A. 2021.
Hardening of Additive Manufactured 316L Stainless Steel by Using Bimodal Powder Containing Nanoscale Fraction. Materials. PMC7794974 (1), 1-13. DOI: 10.3390/ma14010115. OPEN ACCESS

Rashidi, A., Dominguez-Medina, S., Yan, J., Efremenko, D. S., Vasilyeva, A. A., Doicu, A., Wriedt, T., Wirth, C. L. 2020.
Developing Scattering Morphology Resolved Total Internal Reflection Microscopy (SMR-TIRM) for Orientation Detection of Colloidal Ellipsoids. Langmuir. 36 (43), 13041-13050. DOI: 10.1021/acs.langmuir.0c02482. OPEN ACCESS

Langenhorst, L., Sölter, J., Kuschel, S. 2020.
Partition of Primary Shear Plane Heat in Orthogonal Metal Cutting. Journal of Manufacturing and Materials Processing. 4 (3), 1-25. DOI: 10.3390/jmmp4030082. OPEN ACCESS

Borchers, F., Clausen, B., Eckert, S., Ehle, L., Epp, J., Harst, S., Hettig, M., Klink, A., Kohls, E., Meyer, H., Meurer, M., Rommes, B., Schneider, S., Strunk, R. 2020.
Comparison of Different Manufacturing Processes of AISI 4140 Steel with Regard to Surface Modification and Its Influencing Depth. Metals. 10 (7), 1-26. DOI: 10.3390/met10070895. OPEN ACCESS

Borchers, F., Meyer, H., Heinzel, C., Meyer, D., Epp, J. 2020.
Development of surface residual stress and surface state of 42CrMo4 in multistage grinding. Procedia CIRP. 87 , 198-203. DOI: 10.1016/j.procir.2020.02.095. OPEN ACCESS

Bösing, I., Bobrov, I., Epp, J., Baune, M., Thöming, J. 2020.
Influence of Systematically Changed Martensite Content on the Passive Film Properties of Austenitic Stainless Steel in Neutral Electrolyte. International Journal of Electrochemical Science. , 319-333. DOI: 10.20964/2020.01.09. OPEN ACCESS

Herrmann, M., Beckschwarte, B., Hasselbruch, H., Heidhoff, J., Schenck, C., Riemer, O., Mehner, A., Kuhfuss, B. 2020.
Diamond-Like-Carbon Coated Dies for Electromagnetic Embossing. Materials. 13 (21), 1-10. DOI: 10.3390/ma13214939. OPEN ACCESS

Lehtonen, J., Ge, Y., Ciftci, N., Heczko, O., Uhlenwinkel, V., Hannula, S.-P. 2020.
Phase structures of gas atomized equiatomic CrFeNiMn high entropy alloy powder. Journal of Alloys and Compounds. 827 , 1-7.

Frerichs, F., Lübben, T. 2020.
Influence of Initial Microstructure on Manufacturing Processes with Thermal Loads accompanied by Hardening. Procedia CIRP. 87 , 521-526. DOI: 10.1016/j.procir.2020.02.075. OPEN ACCESS

Lemos Bevilaqua, W., Epp, J., Meyer, H., Da Silva Rocha, A., Roelofs, H. 2020.
In Situ Investigation of the Bainitic Transformation from Deformed Austenite During Continuous Cooling in a Low Carbon Mn-Si-Cr-Mo Steel. Metallurgical and Materials Transactions A. 51 (7), 3627-3637. DOI: 10.1007/s11661-020-05800-6.

Stodt, M. F. B., Kiefer, J., Fritsching, U. 2020.
Drop Dynamics in Heterogeneous Spray Flames for Nanoparticle Synthesis. Atomization and Sprays. 30 (11), 779-797. DOI: 10.1615/AtomizSpr.2020034819. OPEN ACCESS

Lenz, B., Hasselbruch, H., Großmann, H., Mehner, A. 2020.
Application of CNN networks for an automatic determination of critical loads in scratch tests on a-C:H:W coatings. Surface and Coatings Technology. 393 , 1-7. DOI: 10.1016/j.surfcoat.2020.125764.

Lenz, B., Hasselbruch, H., Mehner, A. 2020.
Automated evaluation of Rockwell adhesion tests for PVD coatings using convolutional neural networks. Surface and Coatings Technology. 385 , 1-7. DOI: 10.1016/j.surfcoat.2020.125365.

Stodt, M. F. B., Liu, C., Li, S., Mädler, L., Fritsching, U., Kiefer, J. 2020.
Phase-selective laser-induced breakdown spectroscopy in flame spray pyrolysis for iron oxide nanoparticle synthesis. Proceedings of the Combustion Institute. 38 (1), 1711-1718. DOI: 10.1016/j.proci.2020.06.092. OPEN ACCESS

Hettig, M., Meyer, D. 2020.
Sequential multistage deep rolling under varied contact conditions. Procedia CIRP. 87 , 291-296. DOI: 10.1016/j.procir.2020.02.027. OPEN ACCESS

Brinksmeier, E., Karpuschewski, B., Yan, J., Schönemann, L. 2020.
Manufacturing of multiscale structured surfaces. CIRP Annals - Manufacturing Technology. 69 (2), 717-739. DOI: 10.1016/j.cirp.2020.06.001. OPEN ACCESS

Li, H., Pokhrel, S., Schowalter, M., Rosenauer, A., Kiefer, J., Mädler, L. 2020.
The gas-phase formation of tin dioxide nanoparticles in single droplet combustion and flame spray pyrolysis. Combustion and Flame. PMC7116032 , 389-400. DOI: 10.1016/j.combustflame.2020.02.004. OPEN ACCESS

Li, M., Liu, M., Riemer, O., Song, F., Lyu, B. 2020.
Anhydrous based shear-thickening polishing of KDP crystal. Chinese Journal of Aeronautics. 36 (4), 90-99. DOI: 10.1016/j.cja.2020.09.019. OPEN ACCESS

Taruttis, A., Hardes, C., Röttger, A., Uhlenwinkel, V., Chehreh, A. B., Theisen, W., Walther, F., Zoch, H.-W. 2020.
Laser additive manufacturing of hot work tool steel by means of a starting powder containing partly spherical pure elements and ferroalloys. Procedia CIRP. 94 , 46-51. DOI: 10.1016/j.procir.2020.09.010. OPEN ACCESS

Liu, C., Pokhrel, S., Tessarek, C., Li, H., Schowalter, M., Rosenauer, A., Eickhoff, M., Li, S., Mädler, L. 2020.
Rare-Earth-Doped Y4Al2O9 Nanoparticles for Stable Light-Converting Phosphors. ACS Applied Nano Materials. 3 (1), 699-710. DOI: 10.1021/acsanm.9b02231. OPEN ACCESS

Sackmann, D., Heinzel, J., Karpuschewski, B. 2020.
An approach for a reliable detection of grinding burn using the Barkhausen noise multi-parameter analysis. Procedia CIRP. 87 , 415-419. DOI: 10.1016/j.procir.2020.02.076. OPEN ACCESS

Hoja, S., Steinbacher, M., Zoch, H.-W. 2020.
Compound Layer Design for Deep Nitrided Gearings. Metals. 10 (4), 1-12. DOI: 10.3390/met10040455. OPEN ACCESS

Tönjes, A., Sonnenberg, H., von Hehl, A. 2020.
Correlations and Scalability of Mechanical Properties on the Micro, Meso and Macro Scale of Precipitation-Hardenable Aluminium Alloy EN AW-6082. Metals. 10 (5), 608-619. DOI: 10.3390/met10050608. OPEN ACCESS

Lübben, T., Kagathara, J. 2020.
Influence of Case Hardening Process and Hardenability on the Distortion Behavior of a Weight-Reduced Counter Gear Einfluss von Einsatzhärteprozess und Härtbarkeit auf das Verzugsverhalten eines gewichtsreduzierten Vorgelegerads.HTM Journal of Heat Treatment and Materials 75 (6), 373-399. DOI: 10.3139/105.110424.

Buss, L., Noriler, D., Fritsching, U. 2020.
Impact of Reaction Chamber Geometry on the Particle-Residence-Time in Flame Spray Process. Flow Turbulence and Combustion. 105 (1), 1055-1086. DOI: 10.1007/s10494-020-00187-1.

Lübben, T., Kagathara, J. 2020.
Distortion of Gears as Consequence of Lightweight Construction - Influence of Teeth Maß- und Formänderungen von Leichtbauzahnrädern –Einfluss der Verzahnung. HTM Journal of Heat Treatment and Materials. 75 (3), 153-162. DOI: 10.3139/105.110409.

Ummethala, R., Karamched, P. S., Rathinavelu, S., Singh, N., Aggarwal, A., Sun, K., Ivanov, E., Kollo, L., Okulov, I., Eckert, J., Prashanth, K. G. 2020.
Selective laser melting of high-strength, low-modulus Ti-35Nb-7Zr-5Ta alloy. Materialia. 14 , 9. DOI: 10.1016/j.mtla.2020.100941.

Sander, S., Fritsching, U. 2020.
Dynamic flowsheet simulation of re-entrainment from particle layers formed inside electrostatic precipitators. Particuology. 53 , 41-47. DOI: 10.1016/j.partic.2019.12.009.

Hunkel, M. 2020.
Tempering effects of athermal martensite during quenching and reheating of a SAE 52100 bearing steel. Materials Science and Engineering: A. 790 , 1-10. DOI: 10.1016/j.msea.2020.139601.

Lucca, D. A., Klopfstein, M. J., Riemer, O. 2020.
Ultra-Precision Machining: Cutting With Diamond Tools. Journal of Manufacturing Science and Engineering. 142 (11), 1-15. DOI: 10.1115/1.4048194.

Hunkel, M., Dong, J., Epp, J., Kaiser, D., Dietrich, S., Schulze, V., Rajaei, A., Hallstedt, B., Broeckmann, C. 2020.
Comparative Study of the Tempering Behavior of Different Martensitic Steels by Means of In-Situ Diffractometry and Dilatometry. Materials. 13 (22), 1-15. DOI: 10.3390/ma13225058. OPEN ACCESS

Volegov, A. S., Andreev, S. V., Selezneva, N. V., Ryzhikhin, I. A., Kudrevatykh, N. V., Mädler, L., Okulov, I. 2020.
Additive manufacturing of heavy rare earth free high-coercivity permanent magnets. Acta Materialia. 188 , 733-739. DOI: 10.1016/j.actamat.2020.02.058. OPEN ACCESS

Luhede, L., Wollborn, T., Fritsching, U. 2020.
Stability of multiple emulsions under shear stress. The Canadian Journal of Chemical Engineering. 98 (1), 186-193. DOI: 10.1002/cjce.23578.

Luo, N., Scheitler, C., Ciftci, N., Galgon, F., Fu, Z., Uhlenwinkel, V., Schmidt, M., Körner, C. 2020.
Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties. Materials Characterization. 162 , 1-9.

Sandmann, K., Fritsching, U. 2020.
Selektive Partikelklassierung in ultraschallangeregten Aerosolen. Chemie Ingenieur Technik. 92 (5), 635-642. DOI: 10.1002/cite.201900158. OPEN ACCESS

Hunkel, M., Walter, F., Rickers, M. 2020.
Metallographic Investigation of the Intrinsic Heat Treatment in the Additive Manufacturing of the Steel X40CrMoV5-1. Practical Metallography. 57 (5), 304-320. DOI: 10.3139/147.110623.

Vorspohl, J., Frerichs, F., Schneider, S., Meinke, M., Schröder, W., Lübben, T., Klink, A. 2020.
Determination of residual stresses in processes with multiple thermal loads. Procedia CIRP. 87 , 509-514. DOI: 10.1016/j.procir.2020.02.066. OPEN ACCESS

Vovk, A., Sölter, J., Karpuschewski, B. 2020.
Finite element simulations of the material loads and residual stresses in milling utilizing the CEL method. Procedia CIRP. 87 , 539-544. DOI: 10.1016/j.procir.2020.03.005. OPEN ACCESS

Maischner, D., Fritsching, U., Kini, A., Weisheit, A., Uhlenwinkel, V., Schleifenbaum, J. H., Biermann, T. 2020.
Laser additive manufacturing of copper-chromium-niobium alloys using gas atomized powder. International Journal of Materials Research. 111 (7), 587-593. DOI: 10.3139/146.111912.

Hussain, S., Cui, C., He, L., Mädler, L., Uhlenwinkel, V. 2020.
Effect of hot gas atomization on spray forming of steel tubes using a close-coupled atomizer (CCA). Journal of Materials Processing Technology. 282 , 8. DOI: 10.1016/j.jmatprotec.2020.116677.

Ciftci, N., Yodoshi, N., Armstrong, S., Mädler, L., Uhlenwinkel, V. 2020.
Processing soft ferromagnetic metallic glasses: on novel cooling strategies in gas atomization, hydrogen enhancement, and consolidation. Journal of Materials Science and Technology. 59 , 26-36.

Hussain, S., Cui, C., Temple, N., Uhlenwinkel, V., Mädler, L. 2020.
Porosity and microstructure of steel tubes spray-formed by close-coupled atomizer. Journal of Materials Processing Technology. 276 , 9. DOI: 10.1016/j.jmatprotec.2019.116407.

Waite, D. W., Chuvochina, M., Pelikan, C., Parks, D. H., Yilmaz, P., Wagner, M., Loy, A., Naganuma, T., Nakai, R., Whitman, W. B., Hahn, M. W., Küver, J., Hugenholtz, P. 2020.
Proposal to reclassify the proteobacterial classes Deltaproteobacteria and Oligoflexia, and the phylum Thermodesulfobacteria into four phyla reflecting major functional capabilities. International Journal of Systematic and Evolutionary Microbiology. 70 (11), 5972-6016. DOI: 10.1099/ijsem.0.004213.

Schieber, C., Hettig, M., Zäh, M. F., Heinzel, C. 2020.
Verzugskompensation beim Schleifen. wt Werkstattstechnik online. 110 (3), 159-165.

Ivaniski, T. M., Souza, T. F. d., Epp, J., Rocha, A. d. S. 2020.
Constitutive Modelling of High Temperature Flow Behaviour for a Low Carbon High Silicon Bainitic Steel. Materials Research. 23 (5), 1-10. DOI: 10.1590/1980-5373-mr-2020-0264. OPEN ACCESS

Schieber, C., Hettig, M., Zäh, M. F., Heinzel, C. 2020.
3D modeling and simulation of thermal effects during profile grinding. Production Engineering. 14 (5-6), 655-665. DOI: 10.1007/s11740-020-00983-8. OPEN ACCESS

Jaworek, D., Gierden, C., Kinner-Becker, T., Waimann, J., Reese, S. 2020.
Modeling Material Modifications Using a Process Independent Approach. Procedia Manufacturing. 47 , 1442-1448. DOI: 10.1016/j.promfg.2020.04.314. OPEN ACCESS

Wang, K., Weikamp, M., Lin, M., Zimmermann, C., Schwaiger, R., Prahl, U., Hunkel, M., Spatschek, R. 2020.
Influence of Interface Proximity on Precipitation Thermodynamics. Metals. 10 (10), 15. DOI: 10.3390/met10101292. OPEN ACCESS

Jedamski, R., Heinzel, J., Rößler, M., Epp, J., Eckebrecht, J., Gentzen, J., Putz, M.,, Karpuschewski, B. 2020.
Potential of magnetic Barkhausen noise analysis for in-process monitoring of surface layer properties of steel components in grinding.Technisches Messen 87 (12), 787-798. DOI: 10.1515/teme-2020-0048. OPEN ACCESS

Meierhofer, F., Mädler, L., Fritsching, U. 2020.
Nanoparticle evolution in flame spray pyrolysis—Process design via experimental and computational analysis. AIChE Journal. 66 (2), 1-14. DOI: 10.1002/aic.16885. OPEN ACCESS

Mensching, N., Heinz, N., Meyer, D. 2020.
Characterizing the Local Material Properties of Different Fe-C-Cr-steels by Using Deep Rolled Single Tracks.Materials PMC7663921 (21), 14. DOI: 10.3390/ma13214987. OPEN ACCESS

Cui, C., Uhlenwinkel, V., Schulz, A., Zoch, H.-W. 2020.
Austenitic Stainless Steel Powders with Increased Nitrogen Content for Laser Additive Manufacturing. Metals. 10 (1), 1-11. DOI: 10.3390/met10010061. OPEN ACCESS

Mensching, N., Steinbacher, M., Meyer, D. 2020.
Multiscale Material Characterization Based on Single Particle Impact Utilizing Particle-Oriented Peening and Single-Impact Peening. Materials. PMC7079618 (4), 12. DOI: 10.3390/ma13040904. OPEN ACCESS

Czotscher, T., von Hehl, A., Radel, T., Tönjes, A. 2020.
Correlation between Shock Wave-induced Indentations and Tensile Strength. Procedia Manufacturing. 47 , 756-760. DOI: 10.1016/j.promfg.2020.04.230. OPEN ACCESS

Joo, S. H., Bae, J. W., Park, W. Y., Shimada, Y., Wada, T., Kim, H. S., Takeuchi, A., Konno, T. J., Kato, H., Okulov, I. 2020.
Beating Thermal Coarsening in Nanoporous Materials via High-Entropy Design. Advanced Materials Research. 32 (6), e1906160. DOI: 10.1002/adma.201906160. OPEN ACCESS

Joshi, A., Naatz, H., Faber, K., Pokhrel, S., Dringen, R. 2020.
Iron-Doping of Copper Oxide Nanoparticles Lowers Their Toxic Potential on C6 Glioma Cells. Neurochemical Research. PMC7078150 (4), 809-824. DOI: 10.1007/s11064-020-02954-y. OPEN ACCESS

Adam, B., Karpuschewski, B., Riemer, O. 2020.
Geschwindigkeits abhängiger Materialabtrag beim Polieren. WT Werkstatttechnik. 110 (11-12), 796-799.

Jung, H. Y., Peter, N. J., Gärtner, E., Dehm, G., Uhlenwinkel, V., Jägle, E. A. 2020.
Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion process. Additive Manufacturing. 35 , 8. DOI: 10.1016/j.addma.2020.101337.

Schönemann, L., Berger, D., Dörgeloh, T., Riemer, O., Brinksmeier, E., Krüger, R., Schreiber, P., Denkena, B., Hochbein, J., Parsa, N., Schenck, C., Kuhfuß, B. 2020.
Synergistic approaches to ultra-precision high performance cutting. CIRP Journal of Manufacturing Science and Technology. 28 , 38-51. DOI: 10.1016/j.cirpj.2019.12.001. OPEN ACCESS

Kagathara, J., Wieland, S., Gärtner, E., Uhlenwinkel, V., Steinbacher, M. 2020.
Heat Treatment and Formation of Magnetocaloric 1:13 Phase in LaFe11.4Si1.2Co0.4 Processed by Laser Beam Melting. Materials. PMC7041373 (3), 1-10. DOI: 10.3390/ma13030773. OPEN ACCESS

Ali, R., Akhtar, M. U., Zahoor, A., Ali, F., Scudino, S., Shahid, R. N., Tariq, N. U., Srivastava, V. C., Uhlenwinkel, V., Hasan, B. A., Eckert, J. 2020.
Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals. Materials Chemistry and Physics. 251 , 1-6. DOI: 10.1016/j.matchemphys.2020.123071.

Gärtner, E., Jung, H. Y., Peter, N. J., Dehm, G., Jägle, E. A., Uhlenwinkel, V., Mädler, L. 2020.
Reducing cohesion of metal powders for additive manufacturing by nanoparticle dry-coating. Powder Technology. 379 , 1-24. DOI: 10.1016/j.powtec.2020.10.065.

Meyer, H., Epp, J. 2020.
Spatial Internal Material Load and Residual Stress Distribution Evolution in Synchrotron In Situ Investigations of Deep Rolling. Quantum Beam Science. 4 (1), 1-11. DOI: 10.3390/qubs4010003. OPEN ACCESS

Doicu, A., Eremin, Y., Wriedt, T. 2020.
Transition matrix of a nonspherical particle in the non-local optical response theory. Journal of Quantitative Spectroscopy and Radiative Transfer. 242 , 13. DOI: 10.1016/j.jqsrt.2019.106756.

Karpuschewski, B., Beutner, M., Eckebrecht, J., Heinzel, J., Hüsemann, T. 2020.
Surface integrity aspects in gear manufacturing. Procedia CIRP. 87 , 3-12. DOI: 10.1016/j.procir.2020.05.112. OPEN ACCESS

Moqadam, S. I., Baune, M., Bösing, I., Heinzel, C., Meyer, D., Thomann, A., Mensching, N., Ellendt, N. 2020.
Reproducibility of High-Throughput Sample Properties Produced by a High-Temperature Molten Metal Droplet Generator. Metals. 10 (3), 297-308. DOI: 10.3390/met10030297.

Dong, J., Skalecki, M. G., Hatwig, R. A., Bevilaqua, W. L., Stark, A., Epp, J., da Silva Rocha, A., Zoch, H.-W. 2020.
Study of Microstructural Development of Bainitic Steel using Eddy Current and Synchrotron XRD in-situ Measurement Techniques during Thermomechanical Treatment Untersuchung der Gefügeentwicklung eines bainitischen Stahls mittels Wirbelstrom und Synchrotro. HTM Journal of Heat Treatment and Materials. 75 (1), 3-22. DOI: 10.3139/105.110402. OPEN ACCESS

Moriße, S., Hoffmann, F., Lübben, T., Herbold, K. 2020.
Investigation of Parameters Influencing the Hardening Distortion of Driving Bevel Gears Untersuchung von Einflussgrößen auf den Härteverzug von Antriebskegelrädern.HTM Journal of Heat Treatment and Materials 75 (6), 373-399. DOI: 10.3139/105.110425.

Willert, M., Zielinski, T., Rickens, K., Riemer, O., Karpuschewski, B. 2020.
Impact of ultrasonic assisted cutting of steel on surface integrity. Procedia CIRP. 87 , 222-227. DOI: 10.1016/j.procir.2020.02.009. OPEN ACCESS

Schulz, A., Cui, C., Steinbacher, M., Ümit, T., Wunde, M., Jung, I., Acar, S., Nürnberger, F., Gerstein, G., Herbst, S., Maier, H. J. 2020.
Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of High-alloyed Tool Steels Auswirkungen der Kryobehandlung auf die Mikrostruktur und die mechanischen Eigenschaften hochlegierter Werkzeugstähle. HTM Journal of Heat Treatment and Materials. 75 (5), 73-93. DOI: 10.3139/105.110422.

Schulz, A., Klümper-Westkamp, H., Cui, C., Matthaei-Schulz, E., Uhlenwinkel, V., Zoch, H.-W. 2020.
The Use of the Gas Nitriding Process for the Nitridation of Powder for Laser Powder Bed Fusion. HTM Journal of Heat Treatment and Materials. 75 (2), 83-96. DOI: 10.3139/105.110408.

Dröder, K., Karpuschewski, B., Uhlmann, E., Arrabiyeh, P. A., Berger, D., Busemann, S., Hartig, J., Madanchi, N., Mahlfeld, G., Sommerfeld, C. 2020.
A comparative analysis of ceramic and cemented carbide end mills. Production Engineering. 14 (3), 355-364. DOI: 10.1007/s11740-020-00966-9. OPEN ACCESS

Naatz, H., Manshian, B. B., Rios Luci, C., Tsikourkitoudi, V., Deligiannakis, Y., Birkenstock, J., Pokhrel, S., Mädler, L., Soenen, S. J. 2020.
Model-Based Nanoengineered Pharmacokinetics of Iron-Doped Copper Oxide for Nanomedical Applications. Angewandte Chemie International Edition. PMC7004194 (5), 1828-1836. DOI: 10.1002/anie.201912312. OPEN ACCESS

Ebrahimi, A., Fritsching, U., Heuser, M., Lehmhus, D., Struß, A., Tönjes, A., von Hehl, A. 2020.
A digital twin approach to predict and compensate distortion in a High Pressure Die Casting (HPDC) process chain. Procedia Manufacturing. 52 , 144-149. DOI: 10.1016/j.promfg.2020.11.026. OPEN ACCESS

Kinner-Becker, T., Sölter, J., Karpuschewski, B. 2020.
A simulation-based analysis of internal material loads and material modifications in multi-step deep rolling. Procedia CIRP. 87 , 515-520. DOI: 10.1016/j.procir.2020.02.060. OPEN ACCESS

Ehle, L., Strunk, R., Borchers, F., Schwedt, A., Clausen, B., Mayer, J. 2020.
Influence of process chains with thermal, mechanical and thermo-mechanical impact on the surface modifications of a grind-strengthened 42CrMo4 steel. Procedia CIRP. 87 , 426-431. DOI: 10.1016/j.procir.2020.02.088. OPEN ACCESS

Gockeln, M., Ruiter, T., Palacios Saura, A., Baric, V., Glenneberg, J., Busse, M., Pokhrel, S., Kun, R., Mädler, L. 2020.
Enhancing the Utilization of Porous Li4Ti5O12 Layers for Thin-Film Lithium-Ion Batteries. ACS Applied Energy Materials. 3 (10), 9667-9675. DOI: 10.1021/acsaem.0c01231. OPEN ACCESS

Nishihora, R. K., Luhede, L., Fritsching, U., Novy Quadri, M. G., Hotza, D., Rezwan, K., Wilhelm, M. 2020.
Premix membrane emulsification using flat microfiltration inorganic membranes with tailored structure and composition. Journal of Membrane Science. 608 , 1-8. DOI: 10.1016/j.memsci.2020.118124.

Seidel, B., Heinzel, C., Meyer, D., Geilert, P., Karpuschewski, B. 2020.
Sustainable machining by energy- and resource-efficient application of metalworking fluids. Procedia Manufacturing. 43 , 151-158. DOI: 10.1016/j.promfg.2020.02.129. OPEN ACCESS

Klümper-Westkamp, H., Zimmermann, C. 2020.
Entwicklung einer zerstörungsfreien Umwandlungssensortechnik zur Charakterisierung gradiert eingestellter Gefüge und Randzoneneigenschaften während der Werkstoffumwandlung im Abkühlpfad. AWT - Arbeitsblatt - AiF 19595 N. , 1-6.

Okulov, A. V., Joo, S.-H., Kim, H. S., Kato, H., Okulov, I. 2020.
Nanoporous High-Entropy Alloy by Liquid Metal Dealloying. Metals. 10 (10), 7. DOI: 10.3390/met10101396. OPEN ACCESS

Okulov, I., Joo, S. H., Okulov, A. V., Volegov, A. S., Luthringer, B., Willumeit-Romer, R., Zhang, L., Mädler, L., Eckert, J., Kato, H. 2020.
Surface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying.Nanomaterials PMC7466585 (8), 1-12. DOI: 10.3390/nano10081479. OPEN ACCESS

Okulov, I., Soldatov, I., Kaban, I., Sarac, B., Spieckermann, F., Eckert, J. 2020.
Fabrication of Metastable Crystalline Nanocomposites by Flash Annealing of Cu47.5Zr47.5Al5 Metallic Glass Using Joule Heating. Nanomaterials. PMC7022490 (84), 10. DOI: 10.3390/nano10010084. OPEN ACCESS

Silveira, A. C. d. F., Bevilaqua, W. L., Dias, V. W., de Castro, P., Epp, J., Rocha, A. d. S. 2020.
Influence of Hot Forging Parameters on a Low Carbon Continuous Cooling Bainitic Steel Microstructure. Metals. 10 (5), 11. DOI: 10.3390/met10050601. OPEN ACCESS

Emmermacher, J., Spura, D., Cziommer, J., Kilian, D., Wollborn, T., Fritsching, U., Steingroewer, J., Walther, T., Gelinsky, M., Lode, A. 2020.
Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle. Biofabrication. 12 (2), 1-21. DOI: 10.1088/1758-5090/ab7553. OPEN ACCESS

Guba, N., Heinzel, J., Heinzel, C., Karpuschewski, B. 2020.
Grinding burn limits: Generation of surface layer modification charts for discontinuous profile grinding with analogy trials. CIRP Journal of Manufacturing Science and Technology. 31 , 99-107. DOI: 10.1016/j.cirpj.2020.09.014.

Knoop, D., Lutz, A., Mais, B., von Hehl, A. 2020.
A Tailored AlSiMg Alloy for Laser Powder Bed Fusion. Metals. 10 (4), 1-13. DOI: 10.3390/met10040514. OPEN ACCESS

Guba, N., Hüsemann, T., Karpuschewski, B. 2020.
Influence of gear hobbing feed marks on the resulting gear quality after discontinuous profile grinding. CIRP Journal of Manufacturing Science and Technology. 31 , 314-321. DOI: 10.1016/j.cirpj.2020.06.005.

Beckers, D., Ellendt, N., Fritsching, U., Uhlenwinkel, V. 2020.
Impact of process flow conditions on particle morphology in metal powder production via gas atomization. Advanced Powder Technology. 31 (1), 300-311. DOI: 10.1016/j.apt.2019.10.022. OPEN ACCESS

Kohls, E., Zmich, R., Heinzel, C., Meyer, D. 2020.
Residual stress change in multistage grinding. Procedia CIRP. 87 , 186-191. DOI: 10.1016/j.procir.2020.02.068. OPEN ACCESS

Skalecki, M. G., Klümper-Westkamp, H., Winter, K. M., Zoch, H.-W. 2020.
Controlled Carbonitriding and Simulation of Carbonitriding Process Geregeltes Carbonitrieren und Simulation von Carbonitrierbehandlungen. HTM Journal of Heat Treatment and Materials. 75 (2), 105-120. DOI: 10.3139/105.110405.

Paulsen, T., Guba, N., Sölter, J., Karpuschewski, B. 2020.
Influence of the workpiece material on the cutting performance in low frequency vibration assisted drilling. CIRP Journal of Manufacturing Science and Technology. 31 , 140-152. DOI: 10.1016/j.cirpj.2020.10.003.

Epp, J., Dong, J., Meyer, H., Bohlen, A. 2020.
Analysis of cyclic phase transformations during additive manufacturing of hardenable tool steel by in-situ X-ray diffraction experiments. Scripta Materialia. 177 , 27-31. DOI: 10.1016/j.scriptamat.2019.09.021.

Berger, S. A., Okulov, I. 2020.
Open Porous α + β Titanium Alloy by Liquid Metal Dealloying for Biomedical Applications. Metals. 10 (11), 11. DOI: 10.3390/met10111450. OPEN ACCESS

Peng, G., He, Y., Wang, X.-X., Cheng, Y., Zhang, H., Savolainen, K., Mädler, L., Pokhrel, S., Lin, S. 2020.
Redox Activity and Nano-Bio Interactions Determine the Skin Injury Potential of Co3O4-Based Metal Oxide Nanoparticles toward Zebrafish. ACS Nano. 14 (4), 4166-4177. DOI: 10.1021/acsnano.9b08938. OPEN ACCESS

Zhu, Z., Chen, L., Huang, P., Schönemann, L., Riemer, O., Yao, J., To, S. 2020.
Design and Control of a Piezoelectrically Actuated Fast Tool Servo for Diamond Turning of Microstructured Surfaces. IEEE - Institute of Electrical and Electronics Engineers: Transactions on Industrial Informatics. 67 (8), 6688-6697. DOI: 10.1109/TIE.2019.2937051.

Peter, N. J., Duarte, M. J., Liebscher, C. H., Srivastava, V. C., Uhlenwinkel, V., Jägle, E. A., Dehm, G. 2020.
Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds. 820 , 1-14.

Eremin, Y., Doicu, A., Wriedt, T. 2020.
Numerical method for analyzing the near-field enhancement of nonspherical dielectric-core metallic-shell particles accounting for the nonlocal dispersion. Journal of the Optical Society of America: Optics, Image Science and Vision. 37 (7), 1135-1142. DOI: 10.1364/JOSAA.392537. OPEN ACCESS

Hasselbruch, H., Herrmann, M., Heidhoff, J., Böhmermann, F., Riemer, O., Mehner, A., Kuhfuss, B. 2020.
Potentials of Dry Rotary Swaging. Dry Metal Forming Open Access Journal. 6 , 192–227. DOI: 10.26092/elib/158. OPEN ACCESS

Hasselbruch, H., Herrmann, M., Heidhoff, J., Böhmermann, F., Riemer, O., Mehner, A., Kuhfuss, B. 2020.
Potentials of Dry Rotary Swaging – Final Project Report. Dry Metal Forming Open Access Journal. (6), 192-227. DOI: doi:10.26092/elib/158. OPEN ACCESS

Bianchi Neto, P., Meierhofer, F., Meier, Henry F., Fritsching, U., Noriler, D. 2020.
Modelling polydisperse nanoparticle size distributions as produced via flame spray pyrolysis. Powder Technology. 370 , 116-128. DOI: 10.1016/j.powtec.2020.05.019.

Eremin, Yu. A., Mädler, L., Wriedt, T. 2020.
Influence of the Nonlocal Effect on the Optical Properties of Nonspherical Plasmonic Semiconductor Nanoparticles. Computational Mathematics and Modeling. 31 (1), 58-74. DOI: 10.1007/s10598-020-09476-w.

Birkhofer, H., Lübben, T., Taylor, B. 2020.
Optimizing Mandrel Dimensions for a Fixture Hardening Process of High-Strength Steel Aerospace Parts by Finite Element Simulation. Metals. 10 (3), 1-19. DOI: 10.3390/met10030303. OPEN ACCESS

Pokhrel, S., Mädler, L. 2020.
Flame-made Particles for Sensors, Catalysis, and Energy Storage Applications. Energy and Fuels. PMC7743895 (11), 13209-13224. DOI: 10.1021/acs.energyfuels.0c02220. OPEN ACCESS

He, T., Lu, T., Ciftci, N., Tan, H., Uhlenwinkel, V., Nielsch, K., Scudino, S. 2020.
Mechanical properties and tribological behavior of aluminium matrix composites reinforced with Fe-based metallic glass particles: Influence of particle size. Powder Technology. 361 , 512-519. DOI: 10.1016/j.powtec.2019.11.088.

Sonnenberg, H., Clausen, B. 2020.
Short-Term Characterization of Spherical 100Cr6 Steel Samples Using Micro Compression Test. Materials. PMC7040646 (3), 13. DOI: 10.3390/ma13030733. OPEN ACCESS

He, T., Lu, T., Ciftci, N., Uhlenwinkel, V., Chen, W., Nielsch, K., Scudino, S. 2020.
Interfacial characteristics and mechanical asymmetry in Al2024 matrix composites containing Fe-based metallic glass particles. Materials Science and Engineering: A. , 1-10. DOI: 10.1016/j.msea.2020.139971.

Boes, J., Röttger, A., Theisen, W., Cui, C., Uhlenwinkel, V., Schulz, A., Zoch, H.-W., Stern, F., Tenkamp, J., Walther, F. 2020.
Gas atomization and laser additive manufacturing of nitrogen-alloyed martensitic stainless steel. Additive Manufacturing. 34 , 1-12. DOI: 10.1016/j.addma.2020.101379.

Springer, H., Baron, C., Mostaghimi, F., Poveleit, J., Mädler, L., Uhlenwinkel, V. 2020.
Additive manufacturing of high modulus steels: New possibilities for lightweight design. Additive Manufacturing. 32 , 8. DOI: 10.1016/j.addma.2019.101033.

Bog, M., Sree, K. S., Fuchs, J., Hoang, P. T. N., Schubert, I., Küver, J., Rabenstein, A., Paolacci, S., Jansen, M. A. K., Appenroth, K.‐J. 2020.
A taxonomic revision of Lemna sect. Uninerves (Lemnaceae). Taxon. 69 (1), 56-66. DOI: 10.1002/tax.12188. OPEN ACCESS

Filimonov, A., Rogozin, O. A., Firsov, D. G., Kuzminova, Y. O., Sergeev, S. N., Zhilyaev, A. P., Lerner, M. I., Toropkov, N. E., Simonov, A. P., Binkov, I., Okulov, I., Akhatov, I. S., Evlashin, S. A. 2020.
Hardening of Additive Manufactured 316L Stainless Steel by Using Bimodal Powder Containing Nanoscale Fraction. Materials. PMC7794974 (1), DOI: 10.3390/ma14010115. OPEN ACCESS

Heinzel, C., Kirsch, B., Meyer, D., Webster, J. 2020.
Interactions of grinding tool and supplied fluid. CIRP Annals - Manufacturing Technology. 69 (2), 624-645. DOI: 10.1016/j.cirp.2020.05.001.

Fook, P., Berger, D., Riemer, O., Karpuschewski, B. 2019.
Structuring of Bioceramics by Micro-Grinding for Dental Implant Applications. Micromachines. PMC6562720 (5), 14. DOI: 10.3390/mi10050312. OPEN ACCESS

Steinbacher, M., Hoffmann, F., Zoch, H.-W. 2019.
Surface Layer Microstructure of Carburised and Bainitically Transformed Parts and their Mechanical Properties: Part 3: Investigations of the microstructure and residual stresses of carbon graded samples after partial and full bainite transformation Rands. HTM Journal of Heat Treatment and Materials. 74 (3), 164-180. DOI: 10.3139/105.110375.

Langenhorst, L., Cihan, M., Sölter, J. 2019.
A Three Dimensional Calculation Approach for the Heat Flux Density Distribution in Face Milling. Procedia CIRP. 82 , 8-13. DOI: 10.1016/j.procir.2019.04.164. OPEN ACCESS

Fook, P., Riemer, O. 2019.
Characterisation of Zirconia-based Ceramics after Micro-grinding. Journal of Micro and Nano-Manufacturing. 7 (2), 4. DOI: 10.1115/1.4043693. OPEN ACCESS

Heinzel, J., Sackmann, D., Karpuschewski, B. 2019.
Micromagnetic Analysis of Thermally Induced Influences on Surface Integrity Using the Burning Limit Approach. Journal of Manufacturing and Materials Processing. 3 (4), 13. DOI: 10.3390/jmmp3040093. OPEN ACCESS

Borysenko, D., Karpuschewski, B., Welzel, F., Kundrák, J., Felhő, C. 2019.
Influence of cutting ratio and tool macro geometry on process characteristics and workpiece conditions in face milling. CIRP Journal of Manufacturing Science and Technology. 24 , 1-5. DOI: https://doi.org/10.1016/j.cirpj.2018.12.003.

Lehmhus, D., von Hehl, A., Hausmann, J., Kayvantash, K., Alderliesten, R., Hohe, J. 2019.
New Materials and Processes for Transport Applications: Going Hybrid and Beyond. Advanced Engineering Materials. 21 (6), 7. DOI: 10.1002/adem.201900056.

Stodt, M. F. B., Gonchikzhapov, M., Kasper, T., Fritsching, U., Kiefer, J. 2019.
Chemistry of iron nitrate-based precursor solutions for spray-flame synthesis. Phys Chem Chem Phys. 21 (44), 24793-24801. DOI: 10.1039/c9cp05007h. OPEN ACCESS

Stodt, M. F. B., Kiefer, J., Fritsching, U. 2019.
Ethanol droplet formation, dynamics and combustion mode in the flame of the SpraySyn-nozzle. Experiments in Fluids. 60 (8), 11. DOI: 10.1007/s00348-019-2771-9. OPEN ACCESS

Riefler, N., Wriedt, T., Fritsching, U. 2019.
Impedance characterization of a coupled piezo-tube-fluid system for micro droplet generation. Journal of Fluids and Structures. 88 , 185-197. DOI: 10.1016/j.jfluidstructs.2019.05.005.

Fricke, L. V., Skalecki, M. G., Barton, S., Klümper-Westkamp, H., Zoch, H.-W., Zaremba, D. 2019.
In-situ Characterization by Eddy Current Testing of Graded Microstructural Evolution in the Core and Peripheral Zone during Material Conversion during Case Hardening In-situ-Charakterisierung durch Wirbelstromuntersuchungen der gradierten Gefügeausbildun. HTM Journal of Heat Treatment and Materials. 2019 (6), 345-355. DOI: 10.3139/105.110395.

Friedrich, S., Ishkina, S. O., Tönjes, A., Schenck, C., von Hehl, A., Zoch, H.-W., Kuhfuss, B., Seefeld, T., Vollertsen, F. 2019.
Eccentric rotary swaging variants. Manufacturing Review. 6 , 1-7. DOI: 10.1051/mfreview/2019010. OPEN ACCESS

Li, H., Rosebrock, C., Riefler, N., Wriedt, T., Mädler, L. 2019.
Experimental investigations on the effects of water vapor and oxygen concentrations in the ambience on the burning constant, lifetime and residuals of single isolated xylene, isobutanol and ethanol droplets. Experimental Thermal and Fluid Science. 109 , 9. DOI: 10.1016/j.expthermflusci.2019.109920.

Li, H., Rosebrock, C., Wu, Y., Wriedt, T., Mädler, L. 2019.
Single droplet combustion of precursor/solvent solutions for nanoparticle production: Optical diagnostics on single isolated burning droplets with micro-explosions. Proceedings of the Combustion Institute. 37 (1), 1203-1211. DOI: 10.1016/j.proci.2018.06.133. OPEN ACCESS

Risse, K., Schorgel, M., Bartel, D., Karpuschewski, B., Welzel, F. 2019.
Resource-efficient piston ring/cylinder liner pairing. Industrial Lubrication and Tribology. 71 (1), 154-163. DOI: 10.1108/ilt-06-2018-0250.

Hoffmann, R., Baric, V., Naatz, H., Schopf, S., Mädler, L., Hartwig, A. 2019.
Inverse Nanocomposites Based on Indium Tin Oxide for Display Applications: Improved Electrical Conductivity via Polymer Addition. ACS Applied Nano Materials. 2 (4), 2273-2282. DOI: 10.1021/acsanm.9b00191. OPEN ACCESS

Swapnasrita, S., Pesch, G., Dreyer, J., Riefler, N., Wriedt, T., Mädler, L. 2019.
Implementation of parcel method for surface reactions in DSMC. Computers and Fluids. 187 , 11. DOI: 10.1016/j.compfluid.2019.04.015. OPEN ACCESS

Britt, L. G. H., Brieke, T., Niemeyer, M., Lipinsky, D., Meyer, D., Arlinghaus, H. F., Brinksmeier, E. 2019.
Analysis of the Chemical and Tribological Properties of Phosphate Glass Layers Developing during Metalworking Processes on Manual Transmission Synchronizers. HTM Journal of Heat Treatment and Materials. 74 (1), 50-65. DOI: 10.3139/105.110369.

Sackmann, D., Karpuschewski, B., Epp, J., Jedamski, R. 2019.
Detection of surface damages in ground spur gears by non-destructive micromagnetic methods. Forschung im Ingenieurwesen. 83 (3), 563-570. DOI: 10.1007/s10010-019-00368-z.

Lovell, E. C., Grossman, H., Horlyck, J., Scott, J., Mädler, L., Amal, R. 2019.
Asymmetrical Double Flame Spray Pyrolysis-Designed SiO2/Ce0.7Zr0.3O2 for the Dry Reforming of Methane. ACS Applied Materials and Interfaces. 11 (29), 25766-25777. DOI: 10.1021/acsami.9b02572. OPEN ACCESS

Tönjes, A., Mensching, N., Meyer, D., von Hehl, A. 2019.
Analysis of Different 100Cr6 Material States Using Particle-Oriented Peening. Metals. 9 (10), 8. DOI: 10.3390/met9101056. OPEN ACCESS

Tönjes, A., Sonnenberg, H., Plump, C., Drechsler, R., von Hehl, A. 2019.
Measurement and Evaluation of Calorimetric Descriptors for the Suitability for Evolutionary High-Throughput Material Development. Metals. 9 (2), 12. DOI: 10.3390/met9020149. OPEN ACCESS

Buss, L., Meierhofer, F., Bianchi Neto, P., França Meier, H., Fritsching, U., Noriler, D. 2019.
Impact of co-flow on the spray flame behaviour applied to nanoparticle synthesis. The Canadian Journal of Chemical Engineering. 97 (2), 604-615. DOI: 10.1002/cjce.23386. OPEN ACCESS

Tönjes, A., von Hehl, A. 2019.
A Fast Method for Predicting the Mechanical Properties of Precipitation-Hardenable Aluminum Alloys. Metals. 9 (2), 9. DOI: 10.3390/met9020147. OPEN ACCESS

Said Schicchi, D., Caggiano, A., Hunkel, M., Koenders, E. A. B. 2019.
Thermodynamically consistent multiscale formulation of a thermo-mechanical problem with phase transformations. Continuum Mechanics and Thermodynamics. 31 (1), 273-299. DOI: 10.1007/s00161-018-0682-2.

Said Schicchi, D., Hunkel, M. 2019.
Influence of the parent phase on the bainitic transformation under large stress of manganese-boron steel 22MnB5. Materials Characterization. 151 , 457-469. DOI: 10.1016/j.matchar.2019.01.025.

Horlyck, J., Pokhrel, S., Lovell, E., Bedford, N., Mädler, L., Amal, R., Scott, J. 2019.
Unifying double flame spray pyrolysis with lanthanum doping to restrict cobalt–aluminate formation in Co/Al2O3 catalysts for the dry reforming of methane. Catalysis Science and Technology. 9 (18), 4970-4980. DOI: 10.1039/c9cy01293a. OPEN ACCESS

Luca, A., Riemer, O. 2019.
Analysis of the Downscaling Effect and Definition of the Process Fingerprints in Micro Injection of Spiral Geometries. Micromachines. PMC6562889 (5), 1-11. DOI: 10.3390/mi10050335.

Cao, J., Brinksmeier, E., Fu, M., Gao, R. X., Liang, B., Merklein, M., Schmidt, M., Yanagimoto, J. 2019.
Manufacturing of advanced smart tooling for metal forming. CIRP Annals - Manufacturing Technology. 68 (2), 605-628. DOI: 10.1016/j.cirp.2019.05.001.

Hunkel, M., Kagathara, J., Prahl, U. 2019.
The Influence of Segregations after Forming on the Heat Treatment Result of Bevel Gears. steel research international. 90 (6), 1-9. DOI: 10.1002/srin.201800427.

Ciftci, N., Ellendt, N., Coulthard, G., Soares Barreto, E., Mädler, L., Uhlenwinkel, V. 2019.
Novel Cooling Rate Correlations in Molten Metal Gas Atomization. Metallurgical and Materials Transactions B. 50 (2), 666-677. DOI: 10.1007/s11663-019-01508-0. OPEN ACCESS

Hüsemann, T., Saddei, P., Karpuschewski, B. 2019.
Discontinuous profile grinding of multi-phase, case-hardened gears with improved load-carrying capacity. CIRP Annals - Manufacturing Technology. 68 (1), 333-336. DOI: 10.1016/j.cirp.2019.03.022.

Schestkowa, H., Wollborn, T., Westphal, A., Maria Wagemans, A., Fritsching, U., Drusch, S. 2019.
Conformational state and charge determine the interfacial stabilization process of beta-lactoglobulin at preoccupied interfaces.Journal of Colloid and Interface Science 536 , 300-309. DOI: 10.1016/j.jcis.2018.10.043.

Waldeck, S., Castens, M., Riefler, N., Frerichs, F., Lübben, Th, Fritsching, U. 2019.
Mechanisms and Process Control for Quenching with Aqueous Polymer Solutions Mechanismen und Prozesssteuerung beim Abschrecken mit wässrigen Polymerlösungen. HTM Journal of Heat Treatment and Materials. 74 (4), 238-256. DOI: 10.3139/105.110387.

Ishkina, S., Charni, D., Herrmann, M., Liu, Y., Epp, J., Schenck, C., Kuhfuss, B., Zoch, H.-W. 2019.
Influence of Process Fluctuations on Residual Stress Evolution in Rotary Swaging of Steel Tubes. Materials. PMC6471045 (6), 1-13. DOI: 10.3390/ma12060855. OPEN ACCESS

Ivaniski, T. M., Epp, J., Zoch, H.-W., Rocha, A. d. S. 2019.
Austenitic Grain Size Prediction in Hot Forging of a 20MnCr5 Steel by Numerical Simulation Using the JMAK Model for Industrial Applications. Materials Research. 22 (5), 1-8. DOI: 10.1590/1980-5373-mr-2019-0230. OPEN ACCESS

Mensching, N., Kuschel, S., Sölter, J. 2019.
A Comparative Study of the Influence of the Strain-Hardening in Chip Formation Simulations Using Different Software Packages. Procedia CIRP. 82 , 43-46. DOI: 10.1016/j.procir.2019.03.275. OPEN ACCESS

Czotscher, T., Mensching, N., Vetter, K., Vollertsen, F., Meyer, D. 2019.
Rapid Material Characterization of Deep-Alloyed Steels by Shock Wave-Based Indentation Technique and Deep Rolling. Nanomanufacturing and Metrology. 2 (1), 56-64. DOI: 10.1007/s41871-019-00036-4. OPEN ACCESS

Dalcin, R. L., Hatwig, R. A., Oliveira, L. F., Zottis, J., da Silva Rocha, A., Epp, J., Zoch, H.-W. 2019.
Surface processing to improve the fatigue strength of bainitic steels - An overview. International Journal of Engineering and Technology. 8 (3), 324-332. DOI: 10.14419/ijet.v8i3.29483. OPEN ACCESS

Acar, S., Gerstein, G., Cui, C., Schulz, A., Nürnberger, F. 2019.
Preparation Methods for Scanning Electron Microscope Characterization of Nano-Carbides in Cold Work Steel X153CrMoV12. Practical Metallography. 56 (5), 303-316. DOI: 10.3139/147.110555.

Meyer, D., Mensching, N. 2019.
Internal reinforced domains by intermediate deep rolling in additive manufacturing. CIRP Annals - Manufacturing Technology. 68 (1), 579-582. DOI: 10.1016/j.cirp.2019.04.012. OPEN ACCESS

Meyer, D., Seidel, B. 2019.
Influence of artificial aging on the lubricating ability of water miscible metalworking fluids. Production Engineering. 13 (3-4), 425-435. DOI: 10.1007/s11740-019-00891-6.

Kämmler, J., Mensching, N., Guba, N., Ellendt, N., Meyer, D. 2019.
Shot peening using spherical micro specimens generated in high-throughput processes. Materialwissenschaft und Werkstofftechnik. 50 (1), 5-13. DOI: 10.1002/mawe.201800068. OPEN ACCESS

Schönemann, L., Riemer, O. 2019.
Thermo-mechanical tool setting mechanism for ultra-precision milling with multiple cutting edges. Precision Engineering. 55 , 171-178. DOI: 10.1016/j.precisioneng.2018.09.003.

Doicu, A., Vasilyeva, A. A., Efremenko, D. S., Wirth, C. L., Wriedt, T. 2019.
A light scattering model for total internal reflection microscopy of geometrically anisotropic particles. Journal of Modern Optics. 66 (10), 1139-1151. DOI: 10.1080/09500340.2019.1605005. OPEN ACCESS

Doicu, A., Wriedt, T., Khebbache, N. 2019.
An overview of the methods for deriving recurrence relations for T-matrix calculation. Journal of Quantitative Spectroscopy and Radiative Transfer. 224 , 289-302. DOI: 10.1016/j.jqsrt.2018.11.029.

Moqadam, S. I., Mädler, L., Ellendt, N. 2019.
Microstructure Adjustment of Spherical Micro-samples for High-Throughput Analysis Using a Drop-on-Demand Droplet Generator. Materials. PMC6888193 (22), 13. DOI: 10.3390/ma12223769. OPEN ACCESS

Moqadam, S. I., Mädler, L., Ellendt, N. 2019.
A High Temperature Drop-On-Demand Droplet Generator for Metallic Melts.Micromachines PMC6680520 (7), 1-12. DOI: 10.3390/mi10070477. OPEN ACCESS

Dörfert, R., Zhang, J., Clausen, B., Freiße, H., Schumacher, J., Vollertsen, F. 2019.
Comparison of the fatigue strength between additively and conventionally fabricated tool steel 1.2344. Additive Manufacturing. 27 , 217-223. DOI: 10.1016/j.addma.2019.01.010.

Bader, A., Tönjes, A., Mensching, N., Mandle, A., Onken, A. K., von Hehl, A., Meyer, D., Brannath, W., Tracht, K. 2019.
Parameter Optimization in High-Throughput Testing for Structural Materials. Materials. PMC6829500 (20), 1-16. DOI: 10.3390/ma12203439. OPEN ACCESS

Wollborn, T., Luhede, L., Fritsching, U. 2019.
Evaluating interfacial shear and strain stress during droplet deformation in micro-pores. Physics of Fluids. 31 (1), 16. DOI: 10.1063/1.5064858. OPEN ACCESS

Baric, V., Ciacchi, L., Mädler, L. 2019.
Compaction-induced restructuring of aggregated nanoparticle films using the discrete element method. Powder Technology. 342 , 773-779. DOI: 10.1016/j.powtec.2018.10.038.

Wu, Y., Li, H., Wu, X., Gréhan, G., Mädler, L., Crua, C. 2019.
Change of evaporation rate of single monocomponent droplet with temperature using time-resolved phase rainbow refractometry. Proceedings of the Combustion Institute. 37 (3), 3211-3218. DOI: 10.1016/j.proci.2018.09.026. OPEN ACCESS

Seidel, B., Meyer, D. 2019.
Investigation of the Influence of Aging on the Lubricity of Metalworking Fluids by Means of Design of Experiment. Lubricants. 7 (11), 13. DOI: 10.3390/lubricants7110094. OPEN ACCESS

Xiong, G., Gandhi, R., Zhong, X., Mädler, L., Tse, S. 2019.
Binary collision of a burning droplet and a non-burning droplet of xylene: Outcome regimes and flame dynamics. Proceedings of the Combustion Institute. 37 (3), 3345-3352. DOI: 10.1016/j.proci.2018.06.198.

Okulov, I., Geslin, P. A., Soldatov, I. V., Ovri, H., Joo, S. H., Kato, H. 2019.
Anomalously low modulus of the interpenetrating-phase composite of Fe and Mg obtained by liquid metal dealloying. Scripta Materialia. 163 , 133-136. DOI: 10.1016/j.scriptamat.2019.01.017.

Shojaee, S. A., Qi, Y., Wang, Y. Q., Prenzel, T., Mehner, A., Lucca, D. A. 2019.
Heat treatment of ion-irradiated silica-based thin films. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 447 , 55-58. DOI: 10.1016/j.nimb.2019.03.044.

Elsner-Doerge, F., Riemer, O., Willert, M., Meier, A. 2019.
Forces, form deviations and surface roughness in micro-milling of CoCr alloys for dental prostheses. INJM - International Journal of Nanomanufacturing. 15 (3), 315-333. DOI: 10.1504/IJNM.2019.100464.

Skalecki, M. G., Klümper-Westkamp, H., Steinbacher, M. 2019.
Solubility of Carbon and Nitrogen and Precipitation of Carbides and Nitrides during Carbonitriding as Basis for Simulation Löslichkeit von Kohlenstoff und Stickstoff sowie Ausscheidung von Carbiden und Nitriden beim Carbonitrieren als Grundlage für Simul. HTM Journal of Heat Treament and Materials. 74 (4), 215–222. DOI: 10.3139/105.110385.

König, J., Hoja, S., Tobie, T., Hoffmann, F., Stahl, K. 2019.
Increasing the load carrying capacity of highly loaded gears by nitriding. MATEC Web of Conferences. 287 , 1-8. DOI: 10.1051/matecconf/201928702001. OPEN ACCESS

Zhou, J., Fang, Y., Wang, J., Zhu, L., Wriedt, T. 2019.
Rainbow pattern analysis of a multilayered sphere for optical diagnostic of a heating droplet. Optics Communications. 441 , 113-120. DOI: 10.1016/j.optcom.2019.02.061.

Eremin, Y., Doicu, A., Wriedt, T. 2019.
Extension of the discrete sources method to investigate the non-local effect influence on non-spherical core-shell particles. Journal of Quantitative Spectroscopy and Radiative Transfer. 235 , 300-308. DOI: 10.1016/j.jqsrt.2019.07.012.

Eremin, Y., Doicu, A., Wriedt, T. 2019.
The numerical scheme of the discrete sources method to analyze 3D plasmonic nanostructures accounting for the non-local effect. Journal of Computational Physics. 388 , 357-370. DOI: 10.1016/j.jcp.2019.03.018.

Kripak, G., Sharma, M., Kohlmann, R., Clausen, B., Prahl, U., Zoch, H.-W., Bleck, W. 2019.
Entwicklung eines aluminiumreduzierten niobmikrolegierten Einsatzstahls für den Großgetriebebau Development of an Aluminium-Reduced Niobium-Microalloyed Case Hardening Steel for Heavy Gear Manufacturing. HTM Journal of Heat Treatment and Materials. 74 (1), 36-49. DOI: 10.3139/105.110367.

Hasselbruch, H., Lu, Y., Messaoudi, H., Mehner, A., Vollertsen, F. 2019.
Tribological Properties of Multi-Layer a-C:H:W/a-C:H PVD-Coatings Micro-Structured by Picosecond Laser Ablation. Key Engineering Materials. 809 , 439-444. DOI: 10.4028/www.scientific.net/KEM.809.439.

Prieske, M., Hasselbruch, H., Mehner, A., Vollertsen, F. 2019.
Friction and wear performance of different carbon coatings for use in dry aluminium forming processes. Surface and Coatings Technology. 357 , 1048-1059. DOI: 10.1016/j.surfcoat.2018.10.103.

Qi, Y., Shojaee, S. A., Harriman, T. A., Wang, Y. Q., Mehner, A., Lucca, D. A. 2019.
Effects of nuclear and electronic stopping powers on the conversion of hybrid silicate thin films. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 444 , 103-106. DOI: 10.1016/j.nimb.2019.02.014.

Lagenhorst, L., Cihan, M., Sölter, J. 2019.
A Three Dimensional Calculation Approach for the Heat Flux Density Distribution in Face Milling. Procedia CIRP. 82 , 8-13. DOI: 10.1016/j.procir.2019.04.164. OPEN ACCESS

Steinbacher, M., Alexe, G., Baune, M., Bobrov, I., Bösing, I., Clausen, B., Czotscher, T., Epp, J., Fischer, A., Langstädtler, L., Meyer, D., Raj Menon, S., Riemer, O., Sonnenberg, H., Thomann, A., Tönjes, A., Vollertsen, F., Mensching, N., Ellendt, N. 2019.
Descriptors for High Throughput in Structural Materials Development. High Throughput. PMC6966690 (4), 27. DOI: 10.3390/ht8040022. OPEN ACCESS

Heinzel, C., Kolkwitz, B. 2019.
The Impact of fluid supply on energy efficiency and process performance in grinding. CIRP Annals - Manufacturing Technology. 68 (1), 337-340. DOI: 10.1016/j.cirp.2019.03.023.

Steinbacher, M., Hoffmann, F., Zoch, H.-W. 2018.
Surface Layer Microstructure of Carburised and Bainitically Transformed Parts and their Mechanical Properties: Part 2: Examination of the Microstructure and Internal Stress of Carbon Graded Samples Randschichtgefüge aufgekohlter und bainitisch umge wande. HTM Journal of Heat Treatment and Materials. 73 (6), 298-316. DOI: 10.3139/105.110370.

Steinbacher, M., Hoffmann, F., Zoch, H.-W. 2018.
Surface Layer Microstructure of Carburised and Bainitically Transformed Parts and their Mechanical Properties*. Part 2: Examination of the Microstructure and Internal Stress of Carbon Graded Samples. 73 (6), 298-316. DOI: doi:10.3139/105.110370. OPEN ACCESS

Langenhorst, L., Borchers, F., Heinzel, C. 2018.
Analysis of internal material loads and resulting modifications for grinding with mechanical main impact.Procedia CIRP 77 , 533–536. DOI: 10.1016/j.procir.2018.08.241. OPEN ACCESS

Heithoff, S., Kück, U. D., Volkmer, P., Fritsching, U., Räbiger, N. 2018.
Modelling gas-liquid mass transfer in a two-phase jet flow. The Canadian Journal of Chemical Engineering. 96 (11), 2484-2491. DOI: 10.1002/cjce.23178. OPEN ACCESS

Laube, J., Baric, V., Salameh, S., Mädler, L., Colombi Ciacchi, L. 2018.
A new contact model for the discrete element method simulation of TiO2 nanoparticle films under mechanical load. Granular Matter. 20 (2), 1-16. DOI: 10.1007/s10035-018-0799-9. OPEN ACCESS

Borchers, F., Kämmler, J., Meyer, H., Epp, J., Meyer, D. 2018.
Influence of pre-machining on the surface integrity after processing by mechanical surface treatment. Procedia CIRP. 71 , 453-459. DOI: 10.1016/j.procir.2018.05.047. OPEN ACCESS

Frerichs, F., Lübben, T. 2018.
Development of Process Signatures for Manufacturing Processes with Thermal Loads without and with hardening. Procedia CIRP. 71 , 418-423. DOI: 10.1016/j.procir.2018.05.057.

Bösing, I., Herrmann, M., Bobrov, I., Thöming, J., Kuhfuss, B., Epp, J., Baune, M. 2018.
The influence of microstructure deformation on the corrosion resistance of cold formed