2010

Achelis, L., Sulatycki, K., Uhlenwinkel, V., Mädler, L. "Spray angle and particle size in the pressure gas atomization of Tin and Tin-Copper alloys", PM 2010 Proceedings,   (2010).

Achelis, L., Sulatycki, K., Uhlenwinkel, V., Mädler, L. "Lamellenzerfall von Metallschmelzen im Düsenbereich eines Druck-Gas-Zerstäubers zur Erzeugung von Kompositpartikeln", Spray 2010 Proceedings,   (2010).

Achelis, L., Uhlenwinkel, V., Ristau, R., Krug, P. "Transient temperatures and microstructure of spray formed aluminium alloy Al-Si sheets. Transiente Temperaturen und Mikrostruktur von sprühkompaktierten Al-Si-Flachprodukten", Materialwissenschaft und Werkstofftechnik, 41 (7) 498-503 (2010). dx.doi.org/10.1002/mawe.201000635

Cui, C., Schulz, A., Uhlenwinkel, V., Zobel, F., Zoch, H.W. "Spray forming of stainless steel matrix composites with injection of hard particulates. Sprühkompaktieren von Edelstahl-Matrix-Verbundwerkstoffen mit der Injektion von harten Partikeln", Materialwissenschaft und Werkstofftechnik, 41 (7) 524-531 (2010). dx.doi.org/10.1002/mawe.201000638

Ellendt, N. (2010). Einfluss der Prozessparameter auf Porosität und Mikrostruktur sprühkompaktierter übereutektischer Al-Mg2Si-Legierungen. Dissertation, Universität Bremen, Shaker-Verlag, Aachen, ISBN 978-3-8322-9473-1.

Ellendt, N., Stelling, O., Uhlenwinkel, V., von Hehl, A., Krug, P. "Influence of spray forming process parameters on the microstructure and porosity of Mg2Si rich aluminum alloys. Einfluss der Prozessparameter auf Mikrostruktur und Porosität beim Sprühkompaktieren von Aluminium-Legierungen mit hohen Mg2Si –Gehalten", Materialwissenschaft und Werkstofftechnik, 41 (7) 532-540 (2010). dx.doi.org/10.1002/mawe.201000639

Srivastava, V.C., Surreddi, K.B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Eckert, J., Rosenauer, A., Zoch, H.W. "Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming", Materials Science and Engineering: A, 527 (10-11) 2747-2758 (2010). www.sciencedirect.com/science/article/B6TXD-4Y88DCG-3/2/d826b62f626b288414fd2300f356ddbf

Stelling, O., Ellendt, N., Uhlenwinkel, V., von Hehl, A., Zoch, H.-W. "Hardness and microstructural developments of spray formed aluminium alloys with high Mg2Si content during hot extrusion and heat treatment", International Heat Treatment & Surface Engineering, 4 (1 (6)) 41-46 (2010). dx.doi.org/10.1179/174951410X12572442577345

Surreddi, K.B., et al. "Production of high-strength Al 85 Y 8 Ni 5 Co 2 bulk alloy by spark plasma sintering", Journal of Physics: Conference Series, 240 (1) 012155 (2010). stacks.iop.org/1742-6596/240/i=1/a=012155

Uhlenwinkel, V., Achelis, L., Sulatycki, K., Mädler, L. "New Approach To Generate Composite Particles", PMTEC 2010, 27.-30. June, Fort Lauderdale, Florida USA, Paper No. 2010-01-0039,   (2010).

2009

Achelis, L., Uhlenwinkel, V., Ristau, R., Krug, P. "Transient temperatures and microstructure of spray formed aluminium alloy Al-Si sheets. Transiente Temperaturen und Mikrostruktur von sprühkompaktierten Al-Si-Flachprodukten", Proc. SDMA 2009, 6.-9. Sept., Bremen (Germany),   (2009).

Ellendt, N., Stelling, O., Uhlenwinkel, V., von Hehl, A., Krug, P. "Influence of spray forming process parameters on the microstructure and porosity of Mg2Si rich Aluminum alloys", Proc. SDMA 2009, 6.-9. Sept., Bremen (Germany),   (2009).

Meyer, C., Uhlenwinkel, V., Ristau, R., Jahn, P., Müller, H., Krug, P., Trojahn, W. "Thermal simulation of multilayer composites generated by spray forming", Proc. SDMA 2009, 6.-9. Sept., Bremen (Germany),   (2009).

Schulz, A., Cui, C., Uhlenwinkel, V., Buschenhenke, F., Seefeld, T., Vollertsen, F., Zoch, H.-W. "Spray forming of hypereutectic Al-Si-filler materials for welding high strength aluminum alloys", Proc. SDMA 2009, 6.-9. Sept., Bremen (Germany),   (2009).

Srivastava, V.C., Surreddi, K.B., Schowalter, M., Uhlenwinkel, V., Schulz, A., Eckert, J., Rosenauer, A., Zoch, H.-W. "Novel microstructural characteristics of spray formed Al-RE-TM based glass forming alloys", Proc. SDMA 2009, 6.-9. Sept., Bremen (Germany),   (2009).

Srivastava, V.C., Surreddi, K.B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Rosenauer, A., Zoch, H.-W., Eckert, J. "Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures", ICSSP, Int. Conf. on Solidification Sci. and Process. 4, in: Transactions of the Indian Institute of Metals 62 (2009) 4/5, 331-335 (ISSN: 0972-2815),   (2009).

Stelling, O., Ellendt, N., Uhlenwinkel, V., von Hehl, A., Krug, P., Zoch, H.W. "Coarsening of spray formed aluminium alloys with high Mg2Si-content during subsequent processing", Proc. SDMA 2009, 6.-9. Sept., Bremen (Germany),   (2009).

Srivastava, V.C., Uhlenwinkel, V., Achelis, L., Mukhopadhyay, N.K., Chowdhury, S.G. "On the synthesis of single phase bulk Al-Cu-Fe quasicrystalline alloy by spray casting route. ", Journal of Non-crystalline solids, 223 (11-12 ICQ10 Proceedings Part I)  (2009).

Srivastava, V.C., Surreddi, K.B., Uhlenwinkel, V., Schulz, A., Eckert, J., Zoch, H.-W. "Formation of nano-crystalline matrix composite during spray forming of Al83La5Y5Ni5Co2 alloy", Metallurgical and Materials Transactions A Vol.40A  450-461 (2009).

Jindal, V., Srivastava, V.C., Uhlenwinkel, V. "On the Role of Liquid Phase Stability and GFA Parameters. ", Journal Non-crystalline Solids (2009).

2008

Uhlenwinkel, V., Schulz, A., Bomas, H., Schumacher, J., Spiegelhauer, C., Zoch "Sprühkompaktierte contra gießtechnisch hergestellte Stähle – welche Verbesserungen darf man vom Sprühkompaktieren erwarten?", MaschinenMarkt,   (2008).

Uhlenwinkel, V., Paula Pinto, C., Achelis, L., Ristau, R., Krug, P., Bolfarini, C. "Thermal history of  sprayformed Al-Mg-Si sheets", Proc. PM2008, 8.-12. June 2008, Washington, USA,   (2008).

Uhlenwinkel, V., Achelis, L., Mädler, L. "New atomization process to achieve high production rates during thermal spraying of thick coatings.", Proc. ITSC2008,  2.-4. June 2008, Maastricht, Netherlands,   (2008).

Stelling, O., Ellendt, N., Uhlenwinkel, V., Krug, P., Keßler, O., Zoch, H. "Einfluss des primär ausgeschiedenen Mg2Si-Anteils sowie dessen Verteilung auf die Eigenschaften von sprühkompaktierten AlMgSiCu-Legierungen", J. Heat Treatm. Mat., 63  276-282 (2008).

Srivastava, V.C., Uhlenwinkel, V., Schulz, A., Zoch, H.-W., Mukhopadhyay, N.K., Chowdhury, S.G. "Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming", Zeitschrift für Kristallographie 223 (11-12 ICQ10 Proceedings Part I) 711-715 (2008). dx.doi.org/10.1524/zkri.2008.1032

Srivastava, V.C., Rudrakshi, G.B., Uhlenwinkel, V., Ojha, S.N. "Wear characteristics of spray formed Al alloys and their composites", J Mater Sci,   (2008). dx.doi.org/10.1007/s10853-008-2924-3

Srivastava, V.C., Jindal, V., Uhlenwinkel, V., Bauckhage, K. "Hot-deformation behaviour of spray-formed 2014 Al + SiCP metal matrix composites.", MSE A 477 86-95 (2008). dx.doi.org/10.1016/j.msea.2007.06.086 

Schulz, A., Uhlenwinkel, V., Escher, C., Kohlmann, R., Kulmburg, A., Montero, M.C., Rabisch, R., Schützenhöfer, W., Stocchi, D., Viale, D. "Opportunities and challenges of spray forming high-alloyed steels.", MSE A 477 Volume 477 (Issues 1-2) 69-79 (2008). http://dx.doi.org/10.1016/j.msea.2007.08.082

McHugh, K., Uhlenwinkel, V., Ellendt, N. (2008). Density of sprayformed materials, in Proc. PM2008, 8.-12. June 2008. www.inl.gov/technicalpublications/Documents/4027527.pdf

Ellendt, N., Uhlenwinkel, V., Ahmetovic, L., Boddez, L., Henein, H. "Quality of Sn-Ag powders produced by drop-on-demand technique", Proc. PM2008, 8.-12. June 2008,   (2008). www.retsch-technology.nl/dltmp/www/56036-fd50c094476b/lit_camsizer_quality_of_sn_ag_powder_en.pdf

Achelis, L., Uhlenwinkel, V. "Characterisation of metal powders generated by a pressure-gas-atomizer.", MSE A 477, Volume 477 (Issues 1-2) 15-20 (2008). dx.doi.org/10.1016/j.msea.2007.07.095

2007

Ellendt, N., Uhlenwinkel, V. "Experimental investigation and modeling of the specific enthalpy distribution in a spray cone", Materials Science Forum, 534-536  417-420 (2007).

Ellendt, N., Uhlenwinkel, V., Stalling, O., Irretier, A., Kessler, O. "Spray forming of Mg2Si rich aluminum alloys", Materials Science Forum, 534-536  437-440 (2007). dx.doi.org/10.4028/www.scientific.net/MSF.534-536.437

Uhlenwinkel, V., Ellendt, N. "Porosity in spray-formed materials", Materials Science Forum, 534-536  429-432 (2007).

Uhlenwinkel, V., Ellendt, N., Zoch, H.W., Schulz, A., Stelling, O., Andersen, O. "Optimierung der Dichte sprühkompaktierter Werkstoffe", Proc. 26. Hagener Symposium, November 29th – 30th, 2007, Hagen (Germany), 26   (2007).

Uhlenwinkel, V. "Spray Forming of Al-Mg-Si-Alloy with High Volume of Mg2Si", Proc. TMS 2007 136th Annual Meeting & Exhibition, Materials Processing and Manufacturing Division, February. 25th-28th, USA,  53-60 (2007).

2006

Achelis, L., Uhlenwinkel, V. "Pressure-Gas-Atomization of Molten Metal", Harterei-Technische Mitteilungen, 61 (5) 260-266 (2006).

Achelis, L., Uhlenwinkel, V. "Characterization of Metal Powders Generated by a Gas-Pressure-Atomizer", Proc. PM 2006, 04.-06. Sept., Bremen (Germany),   (2006). dx.doi.org/10.1016/j.msea.2007.07.095

Achelis, L., Uhlenwinkel, V. "Dralldruck-Gas-Zerstäubung von Metallschmelzen", Workshop Spray 29.05.-30.05, Lampoldhausen,   (2006).

Achelis, L., Uhlenwinkel, V., Bauckhage, K. "Influence of Process Parameters on Particle Charateristics using a combined Pressure-Swirl-Gas Atomizer", Int. J. of Materials Research (www.ijmr.de), 97 (11) 1571-1578 (2006). www.ijmr.de/directlink.asp

Achelis, L., Uhlenwinkel, V., Lagutkin, S., Sheikhaliev, S. "Atomization Using a Pressure-Gas-Atomizer", Proc. PM 2006, 24.-28. Sept., Busan (South Korea),   (2006). dx.doi.org/10.4028/www.scientific.net/MSF.534-536.13

Ellendt, N., Uhlenwinkel, V. "Experimental Investigation and Modelling of the Specific Enthapy Distribution in a Spray Cone", Proc. PM 2006, 24.-28. Sept., Busan (South Korea),   (2006).

Ellendt, N., Uhlenwinkel, V., Irretier, A., Kessler, O. "Spray Forming of Mg2Si Rich Aluminium Alloys", Proc. PM 2006, 24.-28. Sept., Busan (South Korea),   (2006). dx.doi.org/10.4028/www.scientific.net/MSF.534-536.437

Ellendt, N., Uhlenwinkel, V., Stelling, O., Kessler, O. "Spray Forming of Mg2Si Rich Aluminium Alloys", Proc. SDMA 2006, 4.-6. Sept., Bremen (Germany),   (2006). dx.doi.org/10.4028/www.scientific.net/MSF.534-536.437

Minisandram, R.S., Forbes-Jones, R.M., Suthar, P.K., Carter, W.T., Uhlenwinkel, V., Ellendt, N. "Characterization of Spray in Nucleated Casting of Superalloys", Proc. SDMA 2006, 04.-06. Sept., Bremen (Germany),   (2006).

Schulz, A., Uhlenwinkel, V.e.a. "Opportunities and Challanges of Spray Forming High-alloyed Steels", Proc. SDMA 2006, 4.-6. Sept., Bremen (Germany),   (2006). dx.doi.org/10.1016/j.msea.2007.08.082

Srivastava, V.C., Jindal, V., Uhlenwinkel, V., Bauckhage, K. "Deformation Behavior of Spray Deposited 2014 Al-SiCp Composites", Proc. SDMA 2006, 04.-06. Sept., Bremen (Germany),   (2006).

Stelling, O., Kessler, O., Zoch, H.W., Ellendt, N., Uhlenwinkel, V. "New Spray Formed Aluminium-Copper Alloys with high Mg2Si content", Proc. SDMA 2006, 4.-6. Sept., Bremen (Germany),   (2006).

Uhlenwinkel, V., Ellendt, N. "Porosity in Spray-formed Materials", Proc. PM 2006, 24.-28. Sept., Busan (South Korea),   (2006).

2005

Sokolowski, P., Uhlenwinkel, V., Liu, Y., Linetski, V., Pulbere, S., Anderson, I. "Advanced Atomization Process for Metal Spray Deposition",    (2005).

Walter, M., Stockinger, M., Tockner, J., Ellendt, N., Uhlenwinkel, V. "Spray forming and post processing of superalloy rings",    (2005).

2004

Bauckhage, K., Schneider, A., Srivastava, V.C., Uhlenwinkel, V. "Effect of thermomechanical treatment on spray formed Cu-Ni-Si alloy", Materials Science and Technology, 20 (7) 839-848 (2004). dx.doi.org/10.1179/026708304225017265

Bauckhage, K., Uhlenwinkel, V., Linetzki, V., Achelis, L., Peschel, F. "Metallurgisch bediente Probleme beim Ausfließen metallischer Schmelzen aus engen Verteileröffnungen", Kolloquien des SFB 372, Universität Bremen, ISBN: 3-8334-2259-9, 7   (2004). sfb372.iwt.uni-bremen.de/downloads/pdf-kolloquium%201-7.pdf

Ellendt, N., Schmidt, R., Knabe, J., Henein, H., Uhlenwinkel, V. "Spray deposition using impulse atomization technique", Materials Science and Engineering A, 383 (1) 107-113 (2004). dx.doi.org/10.1016/j.msea.2004.02.067

Lagutkin, S., Achelis, L., Sheikhaliev, S., Uhlenwinkel, V., Srivastava, V. "Atomization process for metal powder", Materials Science and Engineering A, 383 (1) 1-6 (2004). dx.doi.org/10.1016/j.msea.2004.02.059

Ristau, R., Srivastava, V., Schulz, A., Uhlenwinkel, V., Kienzler, R. "Sprühkompaktieren von Rohren, Simulation und Experiment", Kolloquien des SFB 372, Universität Bremen, 7   (2004). sfb372.iwt.uni-bremen.de/downloads/pdf-kolloquium%201-7.pdf

Schneider, A., Uhlenwinkel, V., Bauckhage, K. "Intergral Process Model of Spray Forming with Particle Injection", Kolloquien des SFB 372, Universität Bremen, 7   (2004). sfb372.iwt.uni-bremen.de/downloads/pdf-kolloquium%201-7.pdf

Schneider, A., Uhlenwinkel, V., Harig, H., Bauckhage, K. "Overspray injection in spray forming of CuSn13.5 billets", Materials Science and Engineering A, 383 (1) 114-121 (2004). dx.doi.org/10.1016/j.msea.2004.02.038

Schulz, A., Uhlenwinkel, V., Bertrand, C., Escher, C., Kohlmann, R., Kulmburg, A., Montero-Pascual, C.M., Rabitsch, R., Schneider, R., Stocchi, D., Viale, D. "Sprühkompaktierte hochlegierte Werkzeugstähle – Herstellung und Eigenschaften", Kolloquien des SFB 372, Universität Bremen, 7   (2004).

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohimann, R., Kulmburg, A., Oldewurtel, A., Schneider, R., Viale, D. "Nitrogen pick-up during spray forming of high-alloyed steels and its influence on microstructure and properties of the final products", Materials Science and Engineering A, 383 (1) 58-68 (2004). dx.doi.org/10.1016/j.msea.2004.02.036

Srivastava, V.C., Schneider, A., Uhlenwinkel, V., Bauckhage, K. "Effect of porosity and reinforcement content on the electrical conductivity of spray formed 2014-Al alloy + SiCp composites", Journal of Materials Science, 39 (22) 6821-6825 (2004). dx.doi.org/10.1023/B:JMSC.0000045611.25373.20

Srivastava, V.C., Schneider, A., Uhlenwinkel, V., Ojha, S.N., Bauckhage, K. "Age-hardening characteristics of Cu-2.4M-0.6Si alloy produced by the spray forming process", Journal of Materials Processing Technology, 147 (2) 174-180 (2004).

Uhlenwinkel, V., Fritsching, U., Bauckhage, K. "Selected Papers of 2nd Int. Conf. on Spray Deposition and Melt Atomization and the 5th Int. Conf. on Spray Forming, Bremen (Germany), 22.-25. June", Materials Science and Engineering, A 383 (1) 1-189 (2004).

Uhlenwinkel, V., Achelis, L., Bauckhage, K. "Symposium Sprühkompaktieren", Kolloquien des SFB 372, Universität Bremen, 7   (2004). sfb372.iwt.uni-bremen.de/downloads/pdf-kolloquium%201-7.pdf

Vetters, H., Spanget, S., Schutz, A., Schimanski, K., Uhlenwinkel, V., Bauckhage, K., Schissler, J.M. "Spray casting of alloys: an innovating approach", Hommes et Fonderie, (341) 9-15 (2004).

2003

Bauckhage, K., Schulz, A., Uhlenwinkel, V. "Verallgemeinerungsfähige Merkmale und Besonderheiten des Sprühkompaktierens", Mat.-wiss. u. Werkstofftechnik, 34  6-12 (2003). dx.doi.org/10.1002/mawe.200390019

Ellendt, N., Schmidt, R., Knabe, J., Henein, H., Uhlenwinkel, V. "Spray Deposition using Impulse Atomization Technique", SDMA 2003 and ICSF V, Bremen, June 23-25, 2  6-15 (2003). dx.doi.org/10.1016/j.msea.2004.02.067

Freyberg, A.V., Henein, H., Uhlenwinkel, V., Buchholz, M. "Droplet solidification and gas-droplet thermal coupling in the atomization of a Cu-6Sn alloy", Metallurgical and Materials Transactions B, 34B (2) 243-253B (2003). dx.doi.org/10.1007/s11663-003-0011-3

Lagutkin, S., Achelis, L., Sheikhaliev, S., Uhlenwinkel, V., Srivastava, V.C. "Atomization Process for Metal Powder", SDMA 2003 and ICSF V, Bremen (Germany), June 23-25, 1  2-51 (2003).

Meyer, O., Schneider, A., Uhlenwinkel, V., Fritsching, U. "Convective heat transfer from a billet due to an oblique impinging circular jet within the spray forming process", International Journal of Thermal Sciences, 42 (6) 561-569 (2003). dx.doi.org/10.1016/S1290-0729(03)00022-X

Schneider, A., Uhlenwinkel, V., Bauckhage, K. "Injection of Overspray in a Metal Spray – Local Mass Flux and Enthalpy Distribution", Proc. of the ICLASS 2003, Sorrento (Italy), July 13.-18.,   (2003).

Schneider, A., Uhlenwinkel, V., Harig, H., Bauckhage, K. "Overspray Injection in Spray Forming of CuSn13,5 Billets", SDMA 2003 and ICSF V, Bremen (Germany), June 23-25, 2  6-39 (2003). dx.doi.org/10.1016/j.msea.2004.02.038

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlman, R., Kulmburg, A., Oldewurtel, A., Schneider, R., Viale, D. "High-alloyed Tools Steels Spray-formed to medium Size Billets and their Performance in comparison to conventional route Material", Kolloquien des SFB 372, 6  149-172 (2003).

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlman, R., Kulmburg, A., Oldewurtel, A., Schneider, R., Viale, D. "Nitrogen pick-up during Spray Forming of high alloyed Steels and its influence on Microstructure and Properties of the final Products", SDMA 2003 and ICSF V, Bremen (Germany), June 23-25, 1  4-31 (2003).

Uhlenwinkel, V., Ziesenis, J.T., Bauckhage, K. "Symposium Spray Forming", Kolloquien des SFB 372, 6   (2003). 

Uhlenwinkel, V., Rauscher, B., Ziesenis, J.T., Schulz, A., Anderson, I., Terpstra, R. "Initial Spray Deposition Trials with Close Coupled Atomization", SDMA 2003 and ICSF V, Bremen (Germany), June 23-25, 1  4-47 (2003).

Uhlenwinkel, V., Achelis, L., Srivastava, V.C., Sheikhaliev, S.M., Lagutkin, S. "New Atomization Process for Metal Powder", Vortrag TMS Annual Meeting, 132nd Annual Meeting & Exhibition, San Diego (USA),   (2003).

Vetters, H., Schulz, A., Uhlenwinkel, V., Bauckhage, K., Mayr, P. "Spray casting of eutectic ferrous alloys, an alternative to powder metallurgy",    (2003).

2002

Buchholz, M., Uhlenwinkel, V., Freyberg, A.V., Bauckhage, K. "Specific enthalpy measurement in molten metal spray",    (2002). dx.doi.org/10.1016/S0921-5093(01)01421-6

Fritsching, U., Uhlenwinkel, V., Bauckhage, K. "Selected Papers from the "Spray Deposition and Melt Atomization" conference SDMA 2000", Materials Science and Engineering, A 326   (2002).

Fritsching, U., Uhlenwinkel, V., Bauckhage, K. (2002). International Conference on Spray Deposition and Melt Atomization (SDMA 2000), Elsevier Science SA, P.O. Box 564, Lausanne 1, CH-1001, Switzerland, [URL:http://www.elsevier.com].

Schneider, A., Klein, R., Uhlenwinkel, V., Heinein, H. "Investigation of Local Particle Mass Flux in a Jet Stream with an Isokinetic Probe", Kolloquien des SFB 372, Universität Bremen, 6  111-148 (2002).

Schneider, R., Schulz, A., Bertrand, C., Kulmburg, A., Oldewurtel, A., Uhlenwinkel, V., Viale, D. "The Perfomance of Spray formed Tool Steels in comparison to conventional route Material", The Use of Steels: Experience and Research; Proc. 6th Int. Tooling Conference, Karlstad (Schweden), 10-13 September,  931-942 (2002). www.ingvet.kau.se/material/fo/pub/itc/79_1111_1124.pdf

Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlman, R., Kulmburg, A., Oldewurtel, A., Schneider, R., Viale, D. "Spray forming of high-alloyed Tool Steel to Billtes of medium size Dimensions", The Use of Steels: Experience and Research; Proc. 6th Int. Tooling Conference, Karlstad (Schweden), 10-13 September,  931-942 (2002). www.ingvet.kau.se/material/fo/pub/itc/80_1125_1146.pdf

Uhlenwinkel, V., Schneider, A., Wriedt, T., Harig, H., Bauckhage, K. "Effect of Particle Injection during Spray Forming of Cu-Sn Billets", Proc. of the Int. Conf. on Powder Metallurgy & Particulate Materials (PM²TEC), Orlando (USA),   (2002).

Uhlenwinkel, V. "Production of Metals by Spray Forming", Vortrag Automation and Progressive Technologies, Novouralsk (Russia),   (2002).

Vetters, H., Schulz, A., Schimanski, K., Spangel, S., Uhlenwinkel, V., Bauckhage, K. "Spray Forming of Cast Alloys, an Innovative Alternative", 65th World Foundry Congress of World Foundrymen Organization, October 20.-24.,  1089-1096 (2002).

Vetters, H., Schulz, A., Uhlenwinkel, V., Bauckhage, K., Schissler, J.M. "Spray Casting of Eutectic Ferrous Alloys: An Alternative Competition to Powder Metallurgy", Proc. 7th SPCI Symposium, Science and Precessing of Cast Iron, Barcelona (Spain), 04.-07. September,   (2002).

2001

Bauckhage, K., Bergmann, D., Fritsching, U., Lohner, H., Schreckenberg, P., Uhlenwinkel, V. "Das Scaling-Down-Problem bei der Zweistoff-Gaszerstäubung von Metallschmelzen", Chemie Ingenieur Technik, 73  304-313 (2001).

Meyer, O., Schneider, A., Uhlenwinkel, V., Fritsching, U. "Wärmeübertragungskoeffizienten an einem schräg angeströmten Bolzen für die Anwendung beim Sprühkompaktieren", Kolloquium des SFB 372, Universität Bremen, 5  155-178 (2001).

Schneider, A., Meyer, O., Tillwick, F., Uhlenwinkel, V., Fritsching, U. "Konvektiver Wärmeübergang an einem schräg angeströmten Bolzen in einer turbulenten Düsenströmung", Kolloquien des SFB 372, Universität Bremen, 5  155-178 (2001).

Schneider, A., Uhlenwinkel, V., Bauckhage, K. "Zum Ausfließen von Metallschmelzen", Kolloquien des SFB 372, Universität Bremen, 5  69-96 (2001).

Schneider, A., Uhlenwinkel, V., Wriedt, T., Harig, H., Bauckhage, K. "Sprayforming of MMC-study on the particle distribution in CuNi2Si billets with graphite",    (2001).

Uhlenwinkel, V., Peschel, F., Linetskyi, V., Bauckhage, K. "Inductive heating of coated ceramics for molten metal application at high temperature",    (2001).

2000

Buchholz, M., Uhlenwinkel, V., Freyberg, A.v., Bauckhage, K. "Specify Enthalpy Measurement in Molten Metal Spray", Kolloquien des SFB 372, Universität Bremen, ISBN: 3-88722-508-2, 5  139-154 (2000).

Freyberg, A.v., Uhlenwinkel, V., Henein, H. "An Analysis of Droplet Cooling in the Atomization of a Cu-6Sn Alloy", SDMA 2000, Bremen, June 26-28, 2  647-658 (2000).

Pedersen, T.B., Hattel, J.H., Pryds, N.H., Buchholz, M., Uhlenwinkel, V. "A new integratednumerical Model for Spray Atomization and Deposition: Comparison between numerical Results and Experiments", SDMA 2000 Spray and Melt Atomization, Bremen, June 26-28, 2  813-823 (2000).

Schneider, A., Uhlenwinkel, V., Wriedt, T., Harig, H., Bauckhage, K. "Study on the Distribution of Al2O3-and Graphite-Particles in Spray- Formed Copper (CuNi2Si) MMC", SDMA 2000 Spray Deposition and Melt Atomization, Bremen, June 26-28, 1  219-229 (2000).

Ziesenis, J., Tillwick, J., Krauss, M., Uhlenwinkel, V. "Analysis of molten metal atomization process using modified phase-Doppler-anemometry",    (2000).

Ziesenis, J.T., Tillwick, J., Uhlenwinkel, V., Bauckhage, K. "Analysis of a Spray Forming Process with Scanning Atomizer Using Modified Phase-Doppler-Anemometry", SDMA 2000 Spray Deposition and Melt Atomization, Bremen, June 26-28, 2  691-702 (2000).

Vor 2000

Uhlenwinkel, V., Fischer, J.E., Schröder, R., Schulz, A., Bauckhage, K. "Thermal History of Spray Formed Billets and its Effect on hot Cracks", Proc. Conf. PM²TEC, Vancouver, B.C., Canada, 20.-24.06.1999, 2  4-235 (1999).

Uhlenwinkel, V., Buchholz, M., Tinscher, R., Schulz, A., Fischer, J.E., Schröder, R. "Investigation of Spray Formed Billets from Bearing Steel AISI 52100", Proc. Int. Conf. of Spray Forming, September 13.-15., Baltimore (USA),   (1999).

Uhlenwinkel, V., Buchholz, M., Bauckhage, K. "Particle mass flux in the spray cone of a free fall atomizer",    (1999).

Tillwick, J., Ziesenis, J.T., Uhlenwinkel, V., Bauckhage, K. "Investigation of the Atomization of Molten Metal using Extended Phase-Doppler-Anemometry", Advances in Powder Metallurgy & Particulate Materials, Proc. Conf. PM²TEC, 20.-24.06, Vancouver (B.C., Canada), 2  1-35 (1999).

Tillwick, J., Uhlenwinkel, V., Bauckhage, K. "Analysis of the spray forming process using backscattering phase-Doppler anemometry", International Journal of Heat and Fluid Flow (USA), 20 (5) 530-537 (1999).

Tillwick, J., Uhlenwinkel, V., Bauckhage, K. "Phase-Doppler Measurements in the Spray Cone of a Spray Forming Process using Extended Signal Processing", Proc. ILASS-Europe, Toulouse (France),   (1999).

Schulz, A., Matthaei-Schulz, E., Spangel, S., Tinscher, R., Uhlenwinkel, V., Mayr, P., Bauckhage, K. "Spray forming of tubes from ball bearing steel SAE 52100", P/M Science & Technology Briefs, 1 (5) 5-10 (1999).

Schulz, A., Matthaei-Schulz, E., Spangel, S., Tinscher, R., Uhlenwinkel, V. "Spray Forming of Ball Bearing Steel", Advances in Powder Metallurgy and Particulate Materials, 2  4-177 (1999).

Schmedders, T., Uhlenwinkel, V., Koch, D., Grathwohl, G. "Novel Ceramic Shaping Techniques by the Freezecast Process", Euromat 99, Surface Engineering, Weinheim, 11   (1999).

Fischer, J.E., Uhlenwinkel, V., Schroder, R., Jordan, N., Hansmann, S., Muller, H.R. "Thermal cracking in large diameter spray formed billets", International Journal of Powder Metallurgy (USA), 35 (6) 27-34 (1999).

Fischer, J.E., Uhlenwinkel, V., Schroder, R., Jordan, N., Hansmann, s., Muller, H.R. "Reduction of crack probability during spray forming of billets",    (1999).

Buchholz, M., Uhlenwinkel, V., Ellendt, N. "The Effect of Deposit Temperature on the Sticking Efficiency during Spray Forming", Proc. International Conference on Spray Forming, September 13-15, Baltimore (USA),   (1999).

Aumund-Kopp, C., Buchholz, M., Uhlenwinkel, V., Evers, S., Müller, D.H. "Mass Flux Distribution of a Mechanically Scanning Atomiser for Application with Spray Forming", Proc. 4th ICSF, September 13-15, Baltimore/USA,   (1999).

Uhlenwinkel, V., Buchholz, M., Kramer, C., Bauckhage, K. "The Characterization of the Spray Cone of a Free Fall Atomizer and its Influence on the Spray Forming Process", Proc. Int. Conf. on Powder Metallurgy, October 18.-22., Granada (Spain),   (1998).

Tillwick, J., Uhlenwinkel, V., Bauckhage, K. "Analysis of the Spray Forming Process using Backscattering Phase-Doppler Anemometry", Proc. ILASS-Europe, Manchester,   (1998).

Tillwick, J., Tost, P., Uhlenwinkel, V., Bauckhage, K. "Untersuchung der Zerstäubung von Metallschmelzen mit einem weiterentwickelten Phasen-Doppler-Anemometer", Proc. Spray, 13.-14.10, Essen (Deutschland),   (1998).

Kramer, C., Uhlenwinkel, V., Bauckhage, K. "Spray forming: the sticking efficiency and its dependency on affecting parameters",    (1998).

Bauckhage, K., Uhlenwinkel, V. "Sprühkompaktieren/Sprayforming", Kolloquien des SFB 372, Universität Bremen, 4   (1998).

Tillwick, J., Uhlenwinkel, V., Dahl, H., Bauckhage, K., Wriedt, T. "Massenstrommessung an Flüssigkeitsstrahlen mittels Phasen-Doppler-Anemometrie", Technisches Messen, 64 (12) 481-486 (1997).

Kramer, C., Uhlenwinkel, V., Bauckhage, K. "Die Bestimmung der Kompaktierungsrate bei der Sprühkompaktierung von Metallen", Kolloquien des SFB 372, Universität Bremen, 2  163-193 (1997).

Uhlenwinkel, V., Kramer, C., Bauckhage, K., Ulrich, J. "Experimental investigation of the sticking efficiency during sprayforming",    (1996).

Kramer, C., Uhlenwinkel, V., Bauckhage, K. "Die Kompaktierung von zerstäubten Metallschmelzen", Spray'96, 2. Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, 4.-5. Juni, Verfahrenstechnik, Uni.-Bremen,   (1996).

Kramer, C., Uhlenwinkel, V., Bauckhage, K. "The Sticking Efficiency at the Spray Forming of Metals", Int. Conf. on Spray Forming, Cardiff (UK), 09.-11. September,   (1996).

Bauckhage, K., Uhlenwinkel, V. "On the possibilities of automated and optimized spray forming", Harterei-Technische Mitteilungen (Germany), 51 (5) 289-297 (1996).

Bauckhage, K., Uhlenwinkel, V. "Sprükompaktieren/Sprayforming", Kolloquien des SFB 372, Universität Bremen, 2   (1996).

Bauckhage, K., Schreckenberg, P., Uhlenwinkel, V. "Metal powder production by melt atomization and rapid solidification in ultrasonic sound standing wave fields. II. Heat transfer and particle cooling in the gas field of an ultrasonic standing wave atomizer", Harterei-Technische Mitteilungen, 50 (4) 245-253 (1995).

Uhlenwinkel, V., Bauckhage, K. "Mass flux profile and local particle size in the spray cone during spray forming of steel, copper and tin",    (1993).

Uhlenwinkel, V., Fritsching, U., Bauckhage, K. "The Influence of Spray Parameters on Local Mass Fluxes and Deposit Growth Rates During Spray Compaction Process",    (1991).

Uhlenwinkel, V., Fritsching, U., Baukhage, K., Urlau, U. "Flow Tests at the Nozzle Outlet of a Two-Material Nozzle-Modelling Tests for the Atomization of Metal Melts", Chemie Ingenieur Technik, 62 (3) 228-229 (1990).

Bauckhage, K., Liu, H.M., Seuren, B., Uhlenwinkel, V. "Spray Forming of Liquid Steel; Local Size and Velocity Distributions of Particles in the Spray Cone and Their Reference to Varying Process Parameters. (Comparison Between a Phase Doppler-Measuring Technique and Patternator Results)", Pm \\\'90, 1  207-215 (1990).