2011
/328/ Stark, P.; Fritsching, U.: Modellierung und Simulation des Siedeeinflusses beim Abschrecken in Flüssigkeiten, HTM Journal of Heat Treatment and Materials 66 (2011) 5, 275-280, www.htm-journal.de/directlink.asp?HT110116
/327/ Riefler, N.; Heiland, M.; Waske, A.; Räbiger, N.; Odenbach, S.; Fritsching, U.: Particle deposition and detachment in capillary sphere packings, Chemical Engineering Journal 174 (2011), 93-101, doi:10.1016/j.cej.2011.08.055
/326/ Glasse, B.; Fritsching, U.: Spectrocscopy of emulsions, more than particle size measurement, 8th Europ. Congress of Chem. Engineering ECCE 2011, Sep. 25-29, 2011, Berlin, Germany, Abstract: www.ecce2011.de
/325/ Hornig, N.; Fritsching, U.: Modeling and Simulation of Heat Transfer in Porous Structures, 8th Europ. Congress of Chem. Engineering ECCE 2011, Sep. 25-29, 2011, Berlin, Germany, Abstract: www.ecce2011.de
/324/ Lampa A.., Fritsching, U.: Atomisation and spraying of viscous feed materials for powder production using hot gas atomisation, 8th Europ. Congress of Chem. Engineering ECCE 2011, Sep. 25-29, 2011, Berlin, Germany, Abstract: www.ecce2011.de
/323/ Knoop, C.; Fritsching, U.: Agglomerate Dispersion in an Ultrasound Environment, 8th Europ. Congress of Chem. Engineering ECCE 2011, Sep. 25-29, 2011, Berlin, Germany, Abstract: www.ecce2011.de
/322/ Krause, F.; Li, X.; Fritsching, U.: Simulation of droplet-formation and –interaction in emulsification processes, Eng. Appl. Comp. Fluid Dyn. 5 (2011)3, 406-415
/321/ Li, X.; Fritsching, U.: Simulation of Head-on collisions of binary liquid droplets, 6th International Berlin Workshop on Transport Phenomena with Moving Boundaries24th-25th November 2011, Berlin, Germany
/320/ Stark, P.; Fritsching, U.: Modelling the influence of flow boiling on the cooling behaviour of a cylindrical specimen during quenching in liquids, 3rd International Conference on Distortion and Engineering IDE 2011, Bremen, Germany, 14-16 September 2011
/319/ Schüttenberg, S.; Lütjens, J.; Hunkel, M.; Fritsching, U.: Adapted spray quenching for distortion control, 3rd International Conference on Distortion and Engineering IDE 2011, Bremen, Germany, 14-16 September 2011
/318/ Stark, P.; Fritsching, U.; Hunkel, M.; Hansmann, D.: Process integrated distortion compensation of large bearing rings, 3rd International Conference on Distortion and Engineering IDE 2011, Bremen, Germany, 14-16 September 2011
/317/ Lampa, A.; Fritsching, U.: Atomization and Spraying of Viscous Polymer Solutions for Powder Production, ILASS – Europe 2011, 24th European Conference on Liquid Atomization and Spray Systems, Estoril, Portugal, 5 - 7 September 2011
/316/ Rosebrock, C.; Pokhrel, S.; Mädler, L.; Fritsching, U.; Noriler, D.; Meier, H.F.: Spray structural parameter influence on the Flame Spray Pyrolysis (FSP) process for nanoparticle production, ILASS – Europe 2011, 24th European Conference on Liquid Atomization and Spray Systems, Estoril, Portugal, 5 - 7 September 2011
/315/ Li, X.G.; Achelis, L.; Uhlenwinkel, V.; Fritsching, U.: Spray process model and simulation for three phase flow in MMC production, ILASS – Europe 2011, 24th European Conference on Liquid Atomization and Spray Systems, Estoril, Portugal, 5 - 7 September 2011
/314/ Hornig, N.; Fritsching, U.: Emulsification with structured membranes: modeling and simulation, 12th Int. Conf. Multiphase Flow in Industrial Plants MFIP 2011, Ischia (Napoli), Italy, Sep. 21-23, 2011
/313/ Lampa, A.; Fritsching, U.: Spray Processes for Powder Production, 12th Int. Conf. Multiphase Flow in Industrial Plants MFIP 2011, Ischia (Napoli), Italy, Sep. 21-23, 2011
/312/ Stark, P.; Schuettenberg, S.; Fritsching, U.: Spray quenching of specimen for ring heat treatment, in: Mammoli, A.A.; Brebbia, C.A. (Eds.): Computational Methods in Multiphase Flow VI, WIT Transactions on Engineering Sciences, Vol. 70, WIT Press, Southampton, Boston, 2011, 201-212
/311/ Glasse, B.; Fritsching, U.; Paiva, J.L.; Quina, F.H.; Guardani, R.: Trübungsspektrometrie – Ein prozessintegrierter Ansatz für die Qualitätssicherung von Kühlschmierstoffen in der Metallverarbeitung, Industrie Management 27 (2011) 2, 59-63
/310/ Lampa, A.; Fritsching, U.: Analyse des Sprayprozesses von komplex viskosen Polymerlösungen in der Pulverproduktion, In: Teipel, U. (Hrsg.): Produktgestaltung in der Partikeltechnologie Band 5, Fraunhofer Verlag, 2011, 5. Symp. Partikeltechnologie, 19.+20. Mai 2011, Pfinztal (Burghausen), S. 255-268
/309/ Schmidt, R.R.; Fritsching, U., Quenching intensity of cylinder loads in high pressure gas quenching, Heat Processing 9 (2011) 1, 1-5
2010
/308/ Brinksmeier, E.; Lübben, Th.; Fritsching,.; Cui, C.; Rentsch, R.; Sölter, J.: Distortion minimization of disks for gear manufacture, International Journal of Machine Tools & Manufacture 51 (2011), 331-338, doi:10.1016/j.ijmachtools.2010.12.005
/307/ Glasse, B.; Seta, G.; Guardani, R.; Fritsching, U.: Emulsion Process Monitor in Metalworking Processes, 2nd International BRAGECRIM-Meeting, Berlin, October 6th-7th 2010
/306/ Schmidt, R.R.; Fritsching, U.: Abschreckintensität von Zylinderchargen bei der Hochdruckgasabschreckung – High pressure gas quenching intensity of cylinder loads, Gaswärme International 59 (2010) 6, 467- 471
/305/ Stark, P.; Krause, F.; Krauss, M.; Fritsching, U.: Modelling and simulation of liquid quenching processes, Proc. 12th Workshop on Two-Phase Flow Predictions, Halle (Saale), Germany, 22. – 25. March 2010
/304/ Glasse, B.; Fritsching, U.: Emulsions-Prozess-Monitor für den Einsatz in der Metallverarbeitung (Kühlschmierstoffe), Chemie Ingenieur Technik 8 (2010) 9, 1421, DOI 10.1002/cite201050305
/303/ Gao, S.; Fritsching, U.: Study of binary in-flight droplet collisions, Mat.-wiss. u. Werkstofftech. 41 (2010) 7, 547-554, DOI 10.1002/mawe.201000641
/302/ Fritsching, U.; Mädler, L.; Uhlenwinkel, V.: Special Issue: Spray Deposition and Melt Atomization (SDMA 2009) and Spray Forming (ICSF VII) - Preface, Materialwissenschaft und Werkstofftechnik / Materials Science and Engineering Technology 41 (2010) 7, 497
/301/ Fritsching, U.; Mädler, L.; Uhlenwinkel, V. (Guest Eds.): Special Issue: Spray Deposition and Melt Atomization (SDMA 2009) and Spray Forming (ICSF VII) - Selected Contributions, Materialwissenschaft und Werkstofftechnik / Materials Science and Engineering Technology 41 (2010) 7
/300/ Pham, D.K.; Hornig, N.; Fritsching, U.; Mädler, L.: Highly Porous Film Synthesis by Single-Step Direct Aerosol Deposition, Earozoru Kenkyu 25 (2010) 2, 140-148, www.jstage.jst.go.jp/article/jar/25/2/140/_pdf
/299/ Decker, R.K.; Meier, H.F.; Fritsching, U.; Mori, M.: Analysis of Particle Interaction with Coherent Structures in a Two-Phase Mixing Jet, Multiphase Science and Technology 22 (2010) 1, 1-30, DOI: 10.1615/MultScienTechn.v22.i1.10
/298/ Decker, R.K.; Noriler, D.; Wiggers, V.R.; Fritsching, U.; Meier, H.F.; Mori, M.: Numerical Simulation of Particle Laden Jet Flows by CFD Techniques, Book of Abstracts 7th International Conference on Multiphase Flow ICMF 2010, Tampa, FL USA, May 30-June 4, 2010
/297/ Lübben, Th.; Rath, J.; Krause, F.; Hoffmann, F.; Fritsching, U.; Zoch, H.-W.: Determination of heat transfer coefficient during high-speed water quenching, 15th International Metallurgy and Materials Congress (IMMC 2010); November 11-13 2010; Istanbul, Turkey
/296/ Dallo, L.; Fritsching, U.; Ludewig, H.: AWT-Fachausschuss 16 „Energieffizienz“, Gaswärme International 59 (2010) 4, 271-272
/295/ Gao, S.; Fritsching, U.: Droplet-Particle Collisions in Intersecting Melt Sprays, Atomization and Sprays 20 (2010) 1, 31-40
/294/ Gutheil, E.; Fritsching, U. (Hrsg.): Proc. SPRAY 2010, 9. Workshop über Sprays, Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Heidelberg, 3.-5. Mai 2010
/293/ Lampa, A.; Fritsching, U.: Analysis of time-dependent structures in sprays in enclosures with square cross sections, Proc. SPRAY 2010; 9. Workshop über Sprays, Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Heidelberg, 3.-5. Mai 2010
/292/ Lampa, A.; Fritsching, U.: Spray structures in spray processes in enclosures with square cross sections, Proc. ILASS – Europe 2010, 23rd Annual Conf. Liquid Atomization and Spray Systems, Brno, Czech Republic, September 2010
/291/ Schüttenberg, S.; Fritsching, U.: Two phase spray cooling for specific local quenching of worpieces in flexible flow fields, Proc. ILASS – Europe 2010, 23rd Annual Conf. Liquid Atomization and Spray Systems, Brno, Czech Republic, September 2010
/290/ Krause, F.; Schüttenberg, S.; Fritsching, U.: Modelling and simulation of flow boiling heat transfer, Int. J. Num. Methods Heat & Fluid Flow 20 (2010) 3, 312-331
/289/ Stark, P.; Krause, F.; Fritsching, U.: Modeling and simulation of liquid quenching processes, Proc. 7th International Conference on Multiphase Flow ICMF 2010, Tampa, FL USA, May 30-June 4, 2010
/288/ Lampa, A.; Fritsching, U.: Analysis of time-dependent spray structures of spray processes in enclosures, Proc. 7th International Conference on Multiphase Flow ICMF 2010, Tampa, FL USA, May 30-June 4, 2010
/287/ Krause, F.; Fritsching, U.: Modelling drop interactions with topological changes in liquid-liquid dispersions, 7th International Conference on Multiphase Flow ICMF 2010, Tampa, FL USA, May 30-June 4, 2010
/286/ Fritsching, U.; Mulhem, B.; Kurt, O.; Schulte, G.: Collision and Break-up of suspension drops, Proc. 1st Graz Workshop Drop Impact on Fluid Objects; Graz, Austria, Feb. 4 and 5, 2010, 1-17
/285/ Fritsching, U.; Kurt, O.; Mulhem, B.; Schulte, G.: Break-up process of suspension ligaments and film, Proc. of World Congress on Particle Technology WCPT 2010, Nürnberg, 26.-29. April 2010
/284/ Ludewig, H.; Haase, B.; Fritsching, U.: Catalytic Flue Gas Treatment from Nitriding Processes, Chem. Eng. Technol. 33 (2010) 1, 145-154
2009
/283/ Schmidt, R.; Fritsching, U.; Lübben, Th.: Möglichkeiten des gezielten Gasabschreckens, HTM Journal of Heat Treatment and Materials 64 (2009) 6, 351-363
/282/ Krause, F.; Fritsching, U.: Pore structures and process parameters for membrane emulsification, International Conference on Non-linearities and Upscaling in Porous Media, Stuttgart, 5. - 7. Oktober 2009
/281/ Xiong, B.; Wang, F.; Zhang, Y.; Zhu, B.; Liu, H.; Li, Z.; Zuo, Y.; Zhang, J.; Fritsching, U.: On the microstructures of spray deposited and homgenized Al-Zn-Mg-Cu alloys, Proc. Spray Deposition and Melt Atomization Conference SDMA 2009, 7.-9. Sep. 2009, Bremen, Germany
/280/ Krause, F.; Fritsching, U.: Numerische Modellierung und Simulation des Membranemulgierens, Chem.-Ing.Tech. 81 (2009) 8, S. 1082-1083
/279/ Gjesing, R.; Hattel, J.; Fritsching, U.: Coupled Atomization and Spray Modelling in the Spray Forming Process using openFOAM, Eng. Appl. Comp. Fluid Dyn. 3 (2009) 4, pp. 471-48
/278/ Fritsching, U.; Mädler, L.; Uhlenwinkel, V. (Eds.): Proc. Spray Deposition and Melt Atomization Conference, SDMA 2009, 7.-9. Sept. 2009, Bremen, Germany, ISBN 978-3-88722-710-4
/277/ Zhu, B.; Xiong, B.; Zhang, Y.; Wang, F.; Li, Z.; Liu, H.; Fritsching, U.; Zhang, J.: Precipitate Behavior and Microstructure Characterization of An Al-Zn-Mg-Cu Alloy Prepared by Spray Forming Process, Proc. Spray Deposition and Melt Atomization Conference SDMA 2009, 7.-9. Sep. 2009, Bremen, Germany
/276/ Schmidt, R.R.; Fritsching, U.: Homogenisation of heat treatment process in high pressure gas quenching, International Heat Treatment and Surface Engineering 3 (2009) 1, pp. 1-10, DOI 10.1179/174951509X466995
/275/ Gao, S.; Fritsching, U.: Droplet Collisions in Overlapping Melt Sprays, Spray Deposition and Melt Atomization Conference SDMA 2009, 6.-8. Sept. 2009, Bremen, Germany
/274/ Riefler, H.; Haselbach, P.; Nickelt, M.; Fritsching, U.: PIV-Messungen um poröse Quader in Querströmungen im Vergleich mit dem Darcy-Forchheimer Modell, GALA 2009 „Lasermethoden in der Strömungmesstechnik“, 8.-10. September 2009, Erlangen
/273/ Scholler, M.; Fritsching, U.: Oscillating Jet Flow in Enclosures with Non-Circular Cross Section, Int. Journal Flow Control 1 (2009) 2, 167 – 173
/272/ Schüttenberg, S.; Krause, F.; Hunkel, M.; Zoch, H.-W.; Fritsching, U.: Quenching with Fluid Jets – Abschrecken mit Flüssigkeitsjets, Mat.-wiss. u. Werkstofftech. 40 (2009), No. 5-6, 408-413, DOI: 10.1002/mawe.200900468
/271/Fritsching, U.: Production of functionalized solid particles in spray processes - From powder properties to tailored processes - “ProcessSpray”, Proc. ICLASS 2009, Int. Conf. Liquid Atomization Spraying Systems, Vail, Colorado USA, July 2009
/270/ Stark, P, Krause, F.; Krauss, M; Fritsching, U.: Modelling and Simulation of Heat Transfer of a Metallic Specimen during Quenching with Liquid Jets, Proc. Multiphase Flows: Simulation, Experiment and Application, Dresden, 26-28 May 2009
/269/ Fritsching, U.; Schuettenberg, S.; Krause, F.; Stark, P.; Schmidt. R.: Controlling Temporal and Spatial Heat Transfer Rates during Quenching of Specimen in Heat Treatment Processes, Turbulence, Heat Mass Transfer 6, 2009, Hanjalic, K.; Nagano, Y.; Jakirlic, S. (Eds.)
/268/ Fritsching, U.; Schmidt, R.: Flow Control in Gas Pressure Quenching for Reducing Distortion Potential, Journal of Mechanical Engineering 55 (2009) 3, 174-181
/267/ Fritsching, U.; Kurt, O.; Mulhem, B.; Schulte, G.: Influence of suspended solid particles on suspension atomization processes, Proc. ICLASS 2009, Int. Conf. Liquid Atomization Spraying Systems, Vail, Colorado USA, July 2009
/266/ Kurt, O.; Fritsching, U.; Schulte, G.: Secondary Droplet Formation during Binary suspension Droplet Collision, Atomization and Sprays 19 (2009) 5, 57-472
/265/ Schmidt, R.; Fritsching, U.: Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching, Journal of ASTM International JAI 6 (2009) 4, 1-14, DOI: 10.1520/JAI101782
/264/ Ludewig, H.; Haase, B.; Fritsching, U.: Zur Reinigung von ammoniakhaltigen Abgasen aus Gasnitrierprozessen, HTM J. Heat Treatment Mat. 64 (2009) 1, 34 – 44
2008
/263/ Krause, F;. Fritsching, U.: Use of micro structured membranes for emulsification, Proc. VII Annual Meeting of the Brazilian Materials Research Society, Guaruja, Sao Paulo, Brazil, 28.9.-2.10.2008
/262/ Schüttenberg, S; Fritsching, U.: Quenching with Fluid Jets, 2nd International Conference on Distortion Engineering 2008, 17.-19.9.2008, Bremen, Germany
/261/ Mori, M.; Bastos, J.; Decker, R.K.; Fritsching, U.: Simulation of a Confined Turbulent Two Phase Jet Flow, AIChEs 2008 Annual Meeting, Philadelphia Pennsylvania, USA, Nov. 16 -21., 2008
/260/ Kurt, O.; Schulte, G.; Fritsching, U.: Secondary droplet formation during binary suspension droplet collisions, Proc. ILASS 2008, Sep. 8-10, Como Lake, Italy
/259/ Czisch, C.; Fritsching, U.: Flow-adapted design for Free-fall atomizers, Atomization and Sprays 18 (2008) 6, 511-522
/258/ Schmidt, R.; Fritsching, U.: Flow Control in Gas Pressure Quenching for reducing Distortion Potential, 2nd International Conference on Distortion Engineering 2008, 17.-19.9.2008, Bremen, Germany
/257/ Bastos, J.C.S.C.; Decker, R.K.; Mori, M.; Fritsching, U.: Particle Interaction with Coherent Structures in a Two-phase Confined Jet, CHEMPOR 2008 - 10th International Chemical and Biological Engineering Conference, 4.-6. Sep. 2008, Braga, Portugal
/256/ Schüttenberg, S.; Krause, F.; Hunkel, M.; Zoch, H.W.; Fritsching, U.: Heat Transfer on Workpieces by Quenching in Fluid Jet Fields, European Conference on Heat Treatment 2008, Innovation in Heat Treatment for Industrial Competetiveness, ECHT 2008, 7.-9. Mai 2008, Verona, Italy
/255/ Fritsching, U.; Schmidt, R.: Gas Flow Control in Batch Mode High Pressure Gas Quenching, European Conference on Heat Treatment 2008, Innovation in Heat Treatment for Industrial Competetiveness, ECHT 2008, 7.-9. Mai 2008, Verona, Italy
/254/ Schmidt, R.; Fritsching, U.: Homogenisierung des Wärmebehandlungsergebnisses bei der chargenweisen Hochdruckgasabschreckung, HTM Z. Werkst. Wärmebeh. Fertigung 63 (2008) 1, 6-4
/253/ Mi, J.; Grant, P.S.; Fritsching, U.; Belkessam, O.; Garmendia, I.; Landabarea, A.: Multiphysics modelling of the spray forming process, Mat. Sci. Engng. A 477 (2008) 1-2, 2-8
/252/ Fritsching, U.; Grant, P.; Uhlenwinkel, V.: Special Issue SDMA 2006 and ICSF VI: Preface, Mat. Sci. Engng. A 477 (2008) 1-2, 1
/251/ Fritsching, U.; Grant, P.; Uhlenwinkel, P.; Kostorz, G. (Guest Eds.): Special Issue: 3rd Int. Conf. on Spray Deposition and Melt Atomization and the 6th International Conference on Spray Forming (ICSF VI), Mat. Sci. Engng. A 477 (2008) 1-2
/250/ Czisch, C.; Fritsching, U.: Atomizer design for viscous-melt atomization, Mat. Sci. Engng. A 477 (2008) 1-2, 21-25
2007
/249/ Krause, F.; Fritsching, U.: Influence of Incident Flow on Boiling Heat Transfer 5th Short Course and Workshop "Multiphase Flow - Simulation, Experiment and Applications Dresden, 25 - 27 April 2007
/248/ Scholler, M.; Fritsching, U.: Jet Flow in a Rectangular Chamber, Proceedings of 26th International Conference of Fluid Dynamics and Thermodynamics Departments, Herbertov, Czech Republic, 2007, ISBN 80-86786-09-9
/247/ Heinlein, J.; Schulte, G.; Fritsching, U.; Guardani, R.: Mapping the structure of a liquid spray by means of neural networks, Chem. Eng. Proc. 46 (2007); 1357-1364
/246/ Krause, F.; Fritsching, U.: Modellierung und Simulation von Prozessen mit transienten Siedeströmungen, Chem.-Ing.-Tech. 79 (2007) 9; 1377
/245/ Schüttenberg, S.; Krause, F.; Hunkel, M.; Zoch, H.-W.; Fritsching, U.: Controlling of workpiece distortion by quenching in flexible Fluid Jet Fields, HTM Z. Werkst. Wärmebeh. Fertigung 62 (2007) 4; 167 – 172
/244/ Kurt, O.; Fritsching, U.; Schulte, G.: Binary Collisions of Droplets with Fluid and Suspension Droplets, Proc. ILASS Europe Meeting 2007, 10.-12.9.07, Mugla, Turkey
/243/ Kurt, O.; Fritsching, U.; Schulte, G.: Binäre Kollision von Tropfen mit fluiden und Suspensions-Partikeln, GALA-Tagung 2007, 4.-6. September 2007, Rostock
/242/ Fritsching, U.; Körich-Decker, R.; Heinlein, J.: Droplet Structure Formation at the Spray Edge, Proc. ILASS Europe Meeting 2007, 10.-12.9.07, Mugla, Turkey
/241/ Fritsching, U.; Czisch, C.; Schubert, L.; H. Motz; Mudersbach, D.; Kühn, M.: Faserfreie Zerstäubung von basischer Hochofenschlacke, FEhS – Report 2 (2007) 14, Institut für Baustoff-Forschung Duisburg¸ ISSN 0948-4795, S. 4 - 8
/240/ Schmidt, R.; Fritsching, U.: Homogenisierung der chargenweisen Hochdruckgasabschreckung, Gaswärme International 56 (2007) 4, 285-289
/239/ Krause, F.; Fritsching, U.: Modeling and Simulation of Boiling Heat Transfer in Quenching Applications, Paper No. S5 Mon C 7, Proc. Int. Conf. Multiphase Flow ICMF 2007, Leipzig, Germany, July 9-13, 2007
/238/ Cui, C.; Fritsching, U.; Schulz, A.: Three-Dimensional Mathematical Modeling and Numerical Simulation of Billet Shape in Spray Forming Using a Scanning Gas Atomizer, Metallurgical and Materials Transactions B 38 (2007), 333-346
/237/ Decker, R.K.; Meier, H.F.; Mori, M.; Fritsching, U.: Particle Interaction with Coherent Structures in a Two-Phase Jet, Paper No. S3 Thu D 58, Proc. Int. Conf. Multiphase Flow ICMF 2007, Leipzig, Germany, July 9-13, 2007
/236/ Schüttenberg, S.; Fritsching, U.; Ströbl, M.; Lohrmann, M.: Controlling flow conditions during ring gear press quenching for distortion reduction, Europ. Conf. on Heat Treatment 2007, Berlin, April 25-27 2007
/235/ Schüttenberg, S.; Hunkel, H.; Zoch, H.-W,; Fritsching, U.: Controlling of distortion by quenching in flexible fluid jet fields, Europ. Conf. on Heat Treatment 2007, Berlin, April 25-27 2007
/234/ Schmidt, R.; Fritsching, U.: Multi-scale modelling and experimental validation of gas quenching processes, Europ. Conf. on Heat Treatment 2007, Berlin, April 25-27 2007
2006
/233/ Fritsching, U.; Uhlenwinkel, V.; Bauckhage, K.; Zoch, H.-W. (Hrsg.): Proc. Spray Deposition and Melt Atomization Conference SDMA 2006, Sep. 4-9, 2006, Bremen, Germany
/232/ Decker, R.K.; Fritsching, U.; Meier, H.F.; Mori, M.: Experimental Study of Particles Interactions with Large Scale Vortices in Two-Phase Jet, Proc. XXII Interamerican Congress of Chemical Engineering, Buenos Aires, Argentina, 1.-4. Oktober 2006
/231/ Czisch, C.; Fritsching, U.: Nozzle Design for Viscous Melt Atomization Spray Deposition and Melt Atomization Conference SDMA 2006, Sep. 4-9, 2006, Bremen, Germany
/230/ Mi, J.; Grant, P.; Fritsching, U.; Belkessam, O.; Garmendia, I.; Landabarea, A.: Multiphysics Modelling of the Spray Forming Process, Spray Deposition and Melt Atomization Conference SDMA 2006, Sep. 4-9, 2006, Bremen, Germany
/229/ Cui, C.; Schulz, A.; Fritsching, U.: Spray Formed Honogeneous Steels of low Distortion Potential, Spray Deposition and Melt Atomization Conference SDMA 2006, Sep. 4-9, 2006, Bremen, Germany
/228/ Fritsching, U.; Körich-Decker, R.; Heinlein, J.: Tropfen-Cluster Diagnose in Sprays und Jets, Fachtagung „Lasermethoden in der Strömungsmesstechnik“ der Gesellschaft für angewandte Laser-Anemometrie GALA, 5.-7. September 2006, Braunschweig, Proceedings; Hrsg.: D. Dopheide, H. Müller, V. Strunck, B. Ruck, A. Leder
/227/ Mulhem, B.; Khoja, G.; Fritsching, U.; Schulte, G.: Break-up of hollow cone and flat suspension lamellae of pressure atomizers, Int. Conf. Liquid Atomization Spraying Systems ICLASS-2006, 27. Aug. - 1. Sep. 2006, Kyoto, Japan
/226/ Schüttenberg, S.; Hunkel, M.; Fritsching, U.; Zoch, H.-W.: Controlled Qunechning of Steel Parts in Fluid Jet Fields, 15th International Federation of Heat Treatment and Surface Modification Technologies Congress 2006, Wien, 25.-29. Sept. 2006
/225/ Markus, S.; Fritsching, U.: Discrete break-up modeling for melt sprays, Int. J. Powder Metall. 42 (2006) 4, 23-32
/224/ Czisch, C.; Fritsching, U.: Auslegung eines Hybridzerstäubers für hochviskose Fluide, SPRAY 2006, Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, Lampoldshausen, 29.-30. Mai 2006
/223/ Heinlein, J.; Fritsching, U.: Konzentrationsinhomogenitäten in Sprays, SPRAY 2006, Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, Lampoldshausen, 29.-30. Mai 2006
/222/ Fritsching, U.; Bauckhage, K.: Sprayforming of Metals (revised edition), Ullmann´s Encyclopedia of Industrial Chemistry, 7th Edition, 2006 Electronic Release, Wiley VCH, Weinheim 2006
/221/ Huang, Z; Czisch, C.; Schreckenberg, P.; Büllesfeld, F.; Fritsching, U.: Powder production by Gas Atomization of Bioglass Melt, Part. Part. Syst. Charact. 22 (2005) 5, pp. 345-351
/220/ Mulhem, B.; Schulte, G.; Fritsching, U.: Solid-liquid separation in suspension atomization, Chem. Eng. Sci. 61 (2006) 8, 2582-2589
/219/ Fritsching, U.; Zhang, G. (Eds.): Sprayforming of New Materials, Proc. Sino-German Workshop, Oct. 9-14, 2005, Beijing, P.R.China
/218/ Schüttenberg, S.; Hunkel, M.; Fritsching, U.; Zoch, H.-W.: Controlling of Distortion by means of Quenching in an adapted Jet Fields, Mat.-wiss. u. Werkstofftech. 37 (2006) 1, 92-96
/217/ Garbero, M.; Vanni, M.; Fritsching, U.: Gas/Surface Heat Transfer in Spray Deposition Processes, Int. J. Heat Fluid Flow 27 (2006) 1, pp. 105-122
/216/ Heinlein, J.; Fritsching, U.: Droplet Clustering in Sprays, Experiments in Fluids 40 (2006) 3, pp. 464-472
/215/ Cui, C.; Schulz, A.; Fritsching, U.; Kohlmann, R.: Spray Forming of Homogeneous 20MnCr5 Steel of Low Distortion Potential, Mat. Wiss. u. Werkstofftech. 37 (2006) 1, 34-39
/214/ Brzoza, M.; Specht, E.; Ohland, J.; Belkessam, O.; Lübben, T.; Fritsching, U.: Minimising Stress and Distortion for Shafts and Discs by Controlled Quenching in a Field of Nozzles, Mat. Wiss. u. Werkstofftech. 37 (2006) 1, 97-102
/213/ Schüttenberg, S.; Hunkel, M.; Fritsching, U.; Zoch, H.-W.: Distortion Compensation by Means of Quenching in Flexible Jet Fields, Proceedings of the 23th ASM Heat Treating Society Conference, Pittsburgh 26.-28. September 2005, ASM (2006)
2005
/212/ Ye, H.; Fritsching, U.; Bauckhage, K.: Simulation der Depositentstehung beim Sprühkompaktieren, HTM 60 (2005) 4, 223-228
/211/ Kühne, U.; Fritsching, U.: Dosage of highly disperse powders by ultrasound agitated tube modules, Powder Technology 155 (2005) 2, 117-124
/210/ Cui, C.; Fritsching, U.; Schulz, A.; Tinscher, R.; Bauckhage, K.; Mayr, P.: Spray forming of homogeneous 100Cr6 bearing steel billets, Journal of Materials Processing Tech. 168 (2005) 3, pp. 496-504
/209/ Mulhem, B.; Fritsching, U.: Solid-liquid seperation in suspension sprays, Proc. 20th ILASS Europe Meeting 2005, Orleans, 5.-7.9.2005, S. 23-28
/208/ Lohner, H.; Czisch, C.; Schreckenberg, P.; Fritsching, U.; Bauckhage, K.: Atomization of viscous melts, Atomization and Sprays 15 (2005) 2, 169-180
/207/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Spray formed bearing steel insensitive to distortion, Part II: Distortion behaviour, J. Mater. Sci., 40 (2005), 1673-1680
/206/ Garmendia, I.; Landabarea, A.; Vicario, T.; Fritsching, U.; Belkessam, O.; Grant, P.; Mi, J.: A unified computer model of the spray forming process of Inconel 718 billets and rings, 6th Int. Superalloys Symp., TMS (The Minerals, Metals & Materials Society), 2-5 October 2005, Pittsburgh, Pennsylvania
/205/ Brzoza, M.; Specht, E.; Ohland, J.; Lübben, Th.; Belkessam, O.; Fritsching, U.; Mayr, P.: Düsenfeldanpassung bei der flexiblen Gasabschreckung – Vergleichmäßigung des Härteergebnisses am Beispiel einer abgesetzten Welle, HTM 60 (2005) 3, 164-172
/204/ Heinlein, J.; Fritsching, U.; Schulte, G.: Erfassung und Bewertung von Konzentrations-Inhomogenitäten von Tropfenverteilungen in Sprays, Proc. Fachtagung “Lasermethoden in der Strömungsmesstechnik”, 6. – 8. September 2005, BTU Cottbus
/203/ Frerichs, F.; Lübben, Th.; Fritsching, U.; Lohner, H.; Rocha, A.; Löwisch, G.; Hoffmann, F.; Mayr, P.: Simulation of gas quenching, Journal de Physique IV 120 (2004), 727-735
/202/ Cui, C.; Fritsching, U.; Schulz, A.; Li, Q.: Mathematical modeling of spray forming process of tubular preforms, Part 2: Heat Transfer, Acta Materialia 53 (2005), 2775-2784
/201/ Schulz, A.; Vetters, H.; Zoch, H.-W.; Bauckhage, K.; Fritsching, U.; Uhlenwinkel, V.: Ergebnisse, Konsequenzen und Perspektiven des Sprühkompaktierens, HTM 60 (2005) 3, 124-131
/200/ Fritsching, U.: “Spray Systems” in: Multiphase Flow Handbook, Ed.: C.T. Crowe, CRC-Press, Boca Raton, Fl, USA, 2006, Chapter 8, pp. 8.1 - 8.100
/199/ Brzoza, M.; Specht, E.; Ohland, J.; Belkessam, O.; Lübben, T.; Fritsching, U.: Minimising Stress and Distortion for Shafts and Discs by Controlled Quenching in a Field of Nozzles, Proc. 1st International Conference on Distortion Engineering IDE 2005, Bremen, 14.-16.9.2005; S. 397-404
/198/ Cui, C.; Fritsching, U.; Schulz, A.; Li, Q.: Mathematical modeling of spray forming process of tubular preforms, Part 1: Shape evolution, Acta Materialia 53 (2005), 2765-2774
/197/ Fritsching, U.: Droplets and Particles in Sprays: Tailoring Particle Properties within Spray Processes, Particuology Vol. 3 (2005) No. 1-2, 125-133
/196/ Schüttenberg, S.; Frerichs, F.; Hunkel, M., Fritsching, U.: Process technology for distortion compensation by means of quenching in flexible jet fields, Int. J. Materials and Product Technology 24 (2005) 1-4, 259-269
/195/ Schüttenberg, S.; Hunkel, M.; Fritsching, U.; Zoch, H.-W.: Controlling of Distortion by means of Quenching in adapted Jet Fields, 1st International Conference on Distortion Engineering, Bremen, 14.-16.9.2005; S. 389-396
/194/ Cui, C.; Schulz, A.; Fritsching, U.; Kohlmann, R.: Spray Forming of Homogeneous 20MnCr5 Steel of Low Distortion Potential, Proc. 1st International Conference on Distortion Engineering, Bremen, 14.-16.9.2005; S. 84-94
/193/ Schmidt, R.; Fritsching, U.: Homogenization of hardness distribution and distortion in high pressure gas quenching, Proc. 1st International Conference on Distortion Engineering, Bremen, 14.-16.9.2005; S. 471-478
2004
/192/ Kühne, U.; Fritsching, U.; Bauckhage, K.: Conveying and dosage of fine solid particles in ultrasound agitated tube modules, in: Handling of highly dispersed powders, Eds.: E. Müller und C. Oestreich, Shaker Verlag, Aachen 2004, S. 267 – 274
/191/ Ye, H.; Fritsching, U.; Bauckhage, K.: Evolution of the Top Surface Temperature of Spray Formed Billet, Powder Metallurgy World Congress & Exhibition PM2004, 17-21 October 2004, Vienna, Austria
/190/ Fritsching, U.; Huang, Z.; Czisch, C.; Markus, S.: Powder Production from Melts by Controlled Gas Atomisation, Powder Metallurgy World Congress & Exhibition PM2004, 17-21 October 2004, Vienna, Austria
/189/ Fritsching, U.; Cui, C.; Huang, Z.; Schulz, A.: Control of the Temperature Distribution in a billet during Spray Forming for minimizing Distortion Potential, Powder Metallurgy World Congress & Exhibition PM2004, 17-21 October 2004, Vienna, Austria
/188/ Ye, H.; Fritsching, U.; Bauckhage, K.: Dreidimensionale Simulation von Depositen beim Sprühkompaktieren, Kolloquium des SFB 372, Bd. 7, Hrsg.: K. Bauckhage, V. Uhlenwinkel, ISBN 3-88722-508-2, S. 33 - 44; Universität Bremen 2004
/187/ Uhlenwinkel, V.; Fritsching, U.; Bauckhage, K. (Eds.): Selected papers of 2nd International Conference on Spray Deposition and Melt Atomization and the 5th International Conference on Spray Forming, Bremen, 22 - 25 June 2003, Materials Science and Engineering A 383 (2004) 1, pg. 1-189
/186/ Hunkel, M.; Schüttenberg, S.; Frerichs, F.; Fritsching, U.; Zoch, H.-W.: Verzugskompensation mittels Abschreckung in flexiblen Düsenfeldern, Teil 2: Wärmebehandlung, HTM 59 (2004) 4, 351 – 357
/185/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Spray formed bearing steel insensitive to distortion, Part I: Material Characterization, J. Mater. Sci., 39 (2004), 5639-5645
/184/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Spray forming of tubular bearing steel performs, Int. J. Powder Metallurgy, 40 (2004) 5, 49-53
/183/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Control of cooling during spray forming of bearing steel billets, Materials Science and Engineering A 383 (2004) 158-165
/182/ Heinlein, J.; Fritsching, U.: Droplet Clustering in Sprays, 19th ILASS Europe 2004, 6-8 September 2004, Nottingham, UK, S. 412-417
/181/ Mulhem, B.; Khoja, G.; Fritsching, U.; Bauckhage, K.: Photographic Observation of Break-up of Hollow Cone Suspension Sheet, 19th ILASS Europe 2004, 6-8 September 2004, Nottingham, UK, S. 451-456
/180/ Czisch, C.; Fritsching, U.; Bauckhage, K.: Prefilming Hybrid Atomization, 19th ILASS Europe 2004, 6-8 September 2004, Nottingham, UK, S. 463-468
/179/ Fritsching, U.; Heinlein, J.: Analysis of Single Point Particle Time Series for Detection of Particle Clustering, 3rd Int. Symp. Two-Phase Flow Modelling and Experimentation, Pisa, 22-24 September 2004
/178/ Verdurmen, R.E.M.; Menn, P.; Ritzert, J.; Blei, S.; Nhumaio, G.C.S.; Sonne Sørensen, T.; Gunsing, M.; Straatsma, J.; Verschueren, M.; Sibeijn, M.; Schulte, G.; Fritsching, U.; Bauckhage, K.; Tropea, C.; Sommerfeld, M.; Watkins, A.P.; Yule, A.J.; Schønfeldt, H.: Simulation of Agglomeration in Spray Drying Installations: The EDECAD Project, Drying Technology 22 (2004) 6, S. 1403-1461
/177/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Spray Forming of Homogeneous Bearing Steel of Minimized Distortion Potential, Materials Science Forum Vols. 475-479 (2005), pp. 2795-2798
/176/ Schüttenberg, S.; Frerichs, F.; Hunkel, M.; Fritsching, U.; Mayr, P.: Verzugskompensation mittels Abschreckung in flexiblen Düsenfeldern, Teil 1: Prozesstechnik, HTM 59 (2004) 3, 185 – 191
/175/ Fritsching, U.; Krauss, M.: Partikeltemperaturmessung bei der Zerstäubung von Metallschmelzen, Chem.-Ing.-Tech. 76 (2004) 6, S. 787-790
/174/ Czisch, C.; Lohner, H.; Fritsching, U.: Einfluss der Gasdüsenanordnung auf den Desintegationsvorgang und das Zerstäubungsergebnis bei der Zweistoffzerstäubung, Chem.-Ing.-Tech. 76 (2004) 6, S. 754-757
/173/ Schulz, A.; Cui, C.; Fritsching, U.; Bauckhage, K.; Mayr, P.: Verzugsminimierung von Wälzlagerkomponenten im Fertigungsprozess durch Sprühkompaktieren, HTM 59 (2004) 3, 161-168
/172/ Bergmann, D.; Fritsching, U.: Sequential Thermal Modelling of the Spray-Forming Process, Int. J. Thermal Science 43 (2004), 403-415
/171/ Markus, S.; Cui, C.; Fritsching, U.; Analysis of deposit growth in spray forming with multiple atomizers, Materials Science and Engineering A 383 (2004) 166-174
/170/ Fritsching, U.; Mulhem, B.; Schulte, G.; Bauckhage, K.: Solid-liquid Separation of Suspensions by Atomization in Twin-fluid Atomizers, 5th International Conference on Multiphase Flow, ICMF’04, Yokohama, Japan, May 30 – June 4, 2004, Paper No. 231
/169/ Markus, S.; Fritsching, U.: Modelling and Direct Simulation of the Behaviour and Secondary Break-up of Melt Droplets in Atomization Processes, 5th International Conference on Multiphase Flow, ICMF’04; Yokohama, Japan, May 30 – June 4, 2004, Paper No. 432
/168/ Fritsching, U.; Kühne, U.: Conveying and Dosage of Fine Solid Particles in an Ultrasound Agitated Tube Module, 5th International Conference on Multiphase Flow, ICMF’04, Yokohama, Japan, May 30 – June 4, 2004, Paper No. 519
/167/ Fritsching, U.: Spray Simulation: Modeling and Numerical Simulation of Sprayforming Metals, Cambridge University Press, Cambridge, UK, 2004, ISBN 0-521-82098-7
/166/ Czisch, C.; Huang, Z.; Lohner, H.; Fritsching, U.; Bauckhage, K.: Atomization of mineral melts with hot gas, Schriftenreihe Mechanische Verfahrenstechnik, Bd. 7, DFG-Schwerpunktprogramm “Fluidzerstäubung”, Dortmund, 18.-19. März 2004, Shaker Verlag, Hrsg.: P. Walzel und C. Tropea, paper no. 1.4
/165/ Heinlein, J.; Fritsching, U.: Detection and evaluation of droplet concentration variations in sprays, Schriftenreihe Mechanische Verfahrenstechnik, Bd. 7, DFG-Schwerpunktprogramm “Fluidzerstäubung”, Dortmund, 18.-19. März 2004, Shaker Verlag, Hrsg.: P. Walzel und C. Tropea, paper no. 5.1
/164/ Hunkel, M.; Schüttenberg, S.; Frerichs, F.; Fritsching, U.: Verzugskompensation einfacher Bauteile mittels Gasabschreckung in flexiblen Düsenfeldern, ATTT/AWT Europ. Tagung „Härten und Abschrecken“, 18. und 19. März 2004, Strasbourg
/163/ Mulhem, B.; Schulte, G.; Fritsching, U.; Bauckhage, K.: Separation of particles from liquids within suspension atomization, Proc. PARTEC 2004, International Congress for Particle Technology, Nürnberg, 16.-18. März 2004
2003
/162/ Belkessam, O.; Fritsching, U.: Modelling and simulation of continuous metal foaming process, Modelling Simul. Mater. Sci. Eng. 11 (2003) 6, S. 823 – 837
/161/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Spray Forming of Homogeneous Bearing Steel Billets using Twin Atomizer, Euro Powder Met. 2003, October 20-22 2003, Valencia, Spain
/160/ Bauckhage, K.; Fritsching, U.; Uhlenwinkel, V.; Ziesenis, J.; Leatham, A. (Eds.): Proceedings of the joint conferences on Spray Deposition and Melt Atomization SDMA 2003 and International Conference on Spray Forming ICSF V, Vol. 1 and 2, Bremen, June 22-25, 2003, ISBN 3-8330-0571-8, publ. by University of Bremen
/159/ Meyer, O.; Schneider, A.; Uhlenwinkel, V.; Fritsching, U.: Convective Heat Transfer from a billet due to an oblique impinging circular jet within the spray forming process, Int. J. Thermal Sci. 42 (2003) 6, S. 561 – 569
/158/ Markus, S.; Fritsching, U.: Spray-Forming with Multiple Atomisation, Proc. Spray Deposition and Melt Atomization SDMA 2003, Bremen June 22-25, 2003
/157/ Czisch, C.; Lohner, H.; Fritsching, U.; Bauckhage, K.; Edlinger, A.: Atomization of Highly Viscous Melts, Proc. Spray Deposition and Melt Atomization SDMA 2003, Bremen June 22-25, 2003
/156/ Krauss, M.; Hua, Y.; Cui, C.; Fritsching, U.: Diagnostic of the Mushy Zone by in-line Measurements and Numerical Simulations, Proc. Spray Deposition and Melt Atomization SDMA 2003, Bremen June 22-25, 2003
/155/ Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Control of Cooling during Spray Forming of Bearing Steel Billet, Proc. Spray Deposition and Melt Atomization SDMA 2003, Bremen June 22-25, 2003
/154/ Czisch, C.; Lohner, H.; Fritsching, U.; Bauckhage, K.: Powder generation from melts with high viscosity, Proc. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, 13.7.-18.7.2003, Sorrento, Italien
/153/ Lohner, H.; Czisch, C.; Fritsching, U.: Impact of Gas Nozzle Arrangement on the Flow Field of a Twin Fluid Atomizer with External Mixing, Proc. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, 13.7.-18.7.2003, Sorrento, Italien
/152/ Markus, S.; Fritsching, U.: Modelling Secondary Breakup of Melts in Sprays, Proc. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, 13.7.-18.7.2003, Sorrento, Italien
/151/ Garbero, M.; Fritsching, U.; Vanni, M.: Influence of Spray Impingement on Gas-Surface Heat Transfer, Proc. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, 13.7.-18.7.2003, Sorrento, Italien
/150/ Mulhem, B.; Fritsching, U.; Schulte, G.; Bauckhage, K.: Characterisation of Twin-Fluid Atomisation for Suspensions, Proc. International Conference on Liquid Atomization and Spray Systems ICLASS 2003, 13.7.-18.7.2003, Sorrento, Italien
/149/ Meyer, O.; Fritsching, U.; Bauckhage, K.: Numerical Investigation of alternative process conditions for influencing the thermal history of spray formed billets, Int. J. Thermal Sci. 42 (2003) 2, 153 – 168
/148/ Kühne, U.; Fritsching, U.; Bauckhage, K.: Conveying of micro- and nano-scale powders in tube modules, 4th Intern. Conf. For Conveying and Handling of Particulate Solids, Budapest, May 27-30, 2003
2002
/147/ Kühne, U.; Fritsching, U.; Bauckhage, K.: Förderung feindisperser Pulver in ultraschallangeregten Rohrmodulen, Schüttgut 5 (2002), S. 480 – 484
/146/ Lohner, H.; Czisch, C.; Fritsching, U.; Bauckhage, K.: Granulation viskoser Mineralschmelzen mittels Heißgaszerstäubung, Chem.-Ing.-Tech. 74 (2002) 9; S. 1270 – 1272
/145/ Kurt, O.; Mulhem, B.; Fritsching, U.; Schulte. G.: Zerstäubung von Suspensionen mittels eines Rotationszerstäubers, Freiberger Forschungshefte A 870, Verfahrenstechnik, TU Freiberg, Obermeier, F. (Hrsg.), Proc. SPRAY 2002, Freiberg 21.-22. November 2002, S. 183 – 192
/144/ Mulhem, B.; Fritsching, U.; Schulte, G.: Einfluß der dispersen Feststoffphase auf den Lamellenzerfall von Suspensionen mit Newtonscher Trägerflüssigkeit, Freiberger Forschungshefte A 870, Verfahrenstechnik, TU Freiberg, Obermeier, F. (Hrsg.), Proc. SPRAY 2002, Freiberg 21.-22. November 2002, S. 93 – 102
/143/ Frerichs, F.; Lübben, T.; Fritsching, U.; Lohner, H.; Rocha, A.; Löwisch, G.; Hoffmann, F; Mayr, P.: Simulation of gas quenching, 2nd International Conference on Thermal Process Modelling and Computer Simulation, Nancy/France 31.3.-2.4.2003
/142/ Czisch, C.; Lohner, H.; Fritsching, U.; Bauckhage, K.: Powder generation from melts with high viscosity, ACHEMA 2003, Frankfurt 19.-24.5.2003; 27th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology, Abstract-Proceedings, p. 304
/141/ Mulhem, B.; Fritsching, U.; Schulte, G.; Bauckhage, K.: Effect of Solid Particle Characteristics on Suspension Atomization, Atomization and Sprays 13 (2003) 2&3, pp. 321-343
/140/ Khalighi, A.; Gould, W.; Freitas, F.; Fritsching, U.; Liepsch, G. (Eds.): Experimental and Numerical Flow Visualization & Laser Anemometry, ASME-FED Symposium, Summer Meeting, Montreal, 14-18 July 2002 (CD-Proceedings)
/139/ Lohner, H.; Fritsching, U.; Bauckhage, K.: Melt Atomization by Heated Gases, ILASS-Europe 2002, Zaragoza, Spanien, 9-11 September 2002, Proceedings
/138/ Mulhem, B.; Bauckhage, K.; Fritsching, U.; Schulte, G.: Beugungsspektrometrie in Sprays von Suspensionen: Modellexperimente und differenzierte, Interpretation der Ergebnisse, 10. Fachtagung Lasermethoden in der Strömungsmeßtechnik, 10. bis 12. September 2002, Universität Rostock
/137/ Fritsching, U.; Kühne, U.; Bauckhage, K.: Particle Transport in Small Tubes by Ultrasound, World Congress on Particle Technology 4, 21-25 July 2002, Sydney, Australia
/136/ Fritsching, U.; Mulhem, B.; Schulte, G.; Bauckhage, K.: Spray Characteristics in Liquid Atomization with Suspended Solid Particles, World Congress on Particle Technology 4, 21-25 July 2002, Sydney, Australia
/135/ Lohner, H.; Czisch, C.; Fritsching, U.; Bauckhage, K.: Zerstäuben viskoser Glas- und Mineralschmelzen mit Heißgas, GVC/DECHEMA Jahrestagung 2002, Wiesbaden, 11-13. Juni 2002, Chem.-Ing. Tech. 74, (2002) 5; S. 568
/134/ Fritsching, U.; Ohland, J.; Belkessam, O.; Lübben, Th.; Mayr, P.; Brzoza, M.; Specht, E.: Flexible Gasabschreckung komplexer Bauteile zur Einstellung gleichmäßiger Härte und minimierter Maß- und Formänderungen, Gaswärme International 51 (2002) 5, S. 227 – 231
/133/ Cui, C.; Meyer, O.; Zöller, H.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P.: Production of Homogeneous Bearing Steel by Spray Forming, CD-ROM Proc. 2002 World Congress on Powder Metallurgy and Particulate Materials, June 16-21, 2002, Orlando, Florida
/132/ Markus, S.; Fritsching, U.: Instability Processes in Melt Atomization, Proc. 2002 World Congress on Powder Metallurgy and Particulate Materials, June 16-21, 2002, Orlando, Florida
/131/ Markus, S.; Fritsching, U.; Bauckhage, K.: Jet Break Up of Liquid Metals in Twin Fluid Atomization, Materials Sci. & Engng. A 326 (2002), S. 122 - 133
/130/ Krauss, M.; Bergmann, D.; Fritsching, U.; Bauckhage, K.: In-situ particle temperature, velocity and size measurement in the spray forming process, Materials Sci. & Engng. A 326 (2002), S. 154 - 164
/129/ Fritsching, U.; Uhlenwinkel, V.; Bauckhage, K. (Eds.): Selected Papers from the „Spray Deposition and Melt Atomization“ conference SDMA 2000, Materials Science and Engineering A 326 ,2002
/128/ Kühne, U.; Fritsching, U.; Bauckhage, K.: Förderung feindisperser Pulver, Tagungsband Innovative Energieträger in der Verfahrenstechnik; 21. Jan. 2002, Leipzig
2001
/127/ Hunkel, M.; Lübben, Th.; Belkessam, O.; Fritsching, U.; Hoffmann, F.; Mayr, P.: Simulation der Wärmebehandlung von einfachen Bauteilen bei der Abschreckung im Gasdüsenfeld, HTM 56 (2001) 6, S. 386 - 393
/126/ Hunkel, M.; Lübben, Th.; Belkessam, O.; Fritsching, U.; Hoffmann, F.; Mayr, P.: Modeling and Simulation of Coupled Gas and Material Behaviour during Gas Quenching, Proc. ASM 2001, Heat Treatment, Indianapolis, Indiana, USA, 5.-7.11.2001
/125/ Bergmann, D.; Fritsching, U.; Bauckhage, K.: Simulation of molten metal droplet sprays, Comp. Fluid Dynamics-Journal Vol. 9 (2001), Jap. Soc. CFD; Ed.: K. Oshima; S. 203 211
/124/ Lohner, H.; Czisch, C.; Schreckenberg, P.; Fritsching, U.; Bauckhage, K.: Zweistoff-Zerstäubung mit Heißgas, Spray 2001, 6. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, TU Hamburg-Harburg, 14./15. November 2001, Eds.: Eggers, R.; Peric, M.
/123/ Mulhem, B.; Fritsching, U.; Schulte, G.; Bauckhage, K.: Zweistoff-Zerstäubung von Suspensionen bei Variation von Feststoffpartikelgröße und Suspensionsliquid, Spray 2001, 6. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, TU Hamburg-Harburg, 14./15. November 2001, Eds.: Eggers, R.; Peric, M.
/122/ Schöne, A.; Büngener, N.; Baumeister, J.; Weber, M.; Belkessam, O.; Fritsching, U.: Continuous Metal Foam Production within an adapted Foaming Equipment, in: Cellular Metals and Metals Foaming Technology, Eds.: J. Banhart, M. Ashby, N. Fleck, MIT-Verlag, Bremen, 2001, S. 161-166
/121/ Meyer, O.; Schneider, A.; Uhlenwinkel, V.; Fritsching, U.: Wärmeübergangskoeffizienten an einem schräg angeströmten Bolzen für die Anwendung beim Sprühkompaktieren, Kolloquium des SFB 372, Bd. 5, Hrsg.: K. Bauckhage, V. Uhlenwinkel, ISBN 3-88722-508-2, S. 155 - 178; Universität Bremen 2001
/120/ Mulhem, B.; Fritsching, U.; Schulte, G.; Bauckhage, K.: Effect of Solid Particle Size on Suspension Atomization, Proc. ILASS-Europe 2001, Zurich, 2-6 Sept. 2001
/119/ Gillandt, I.; Fritsching, U.; Bauckhage, K.: Measurement of Phase Interaction in Dispersed Gas / Particle Two Phase Flow, Int. J. Multiphase Flow 27 (2001), 1313 - 1332
/118/ Bauckhage, K.; Bergmann, D.; Fritsching, U.; Lohner, H.; Schreckenberg, P.; Uhlenwinkel, V.: Das Scaling-Down-Problem bei der Zweistoffzerstäubung von Metallschmelzen, Chemie-Ingenieur-Technik 73 (2001) 4; S. 304 - 313
/117/ Fritsching, U.; Zöller, H.; Ulrich, J.: Heat Transfer in Boundary Layers of Single Crystals in Flowing Solutions, 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September 2001, ISBN 0-7340-2201-8
/116/ Fritsching, U.; Mulhem, B.; Bauckhage, K.: Droplet Characteristics in Liquid Atomization with Suspended Particles, 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September 2001, ISBN 0-7340-2201-8
/115/ Bergmann, D.; Fritsching, U.; Bauckhage, K.: Thermische Simulation des Sprühkompaktierprozesses, HTM 56 (2001) 2; S. 110 - 119
/114/ Fritsching, U.: Spraysimulation - Modellierung und numerische Simulation von Sprayprozessen am Beispiel des Sprühkompaktierens von Metallen, Habil. Univ. Bremen 1999, Shaker Verlag Aachen 2001, ISBN: 3-8265-8179-2
/113/ Fritsching, U.; Gillandt, I.; Bauckhage, K.: Measurement of Turbulence Modulation Effects in Gas/Particle Two-Phase Flow, 3rd European Congress of Chemical Engineering ECCE, 26 - 28 June 2001, Nuremberg, Chem.-Ing. Tech. 73 (2001) 6; S. 738
/112/ Bauckhage, K.; Fritsching, U.; Zöller, H.: Temperaturführung bei Wärmeprozessen, in: Beherrschung von Wärmeprozessen im Fertigungsablauf, Hrsg.: Mayr. P.; Hoffmann, F.; Walter, A., Universität Bremen mit Stiftung Institut für Werkstofftechnik, Bremen, Selbstverlag, 2001, ISBN: 3-88722-506-6; S. 125 – 144
/111/ Fritsching, U.; Markus, S.; Bauckhage, K.: Liquid Jet Instability of Liquid Metals prior to Atomization, Proc. ICMF-2001, 4th Int. Conf. Multiphase Flow, May 27 - June 1, 2001, New Orleans, USA
/110/ Fritsching, U.; Gillandt, I.: Derivation and Discussion of Turbulence Energy Spectra in Dispersed Multiphase Jet Flow, Proc. ICMF-2001, 4th Int. Conf. Multiphase Flow, May 27 - June 1, 2001, New Orleans, USA
/109/ Kühne, U.; Fritsching, U.; Bauckhage, K.: Ultrasound Assisted Transport of Highly Disperse Metal Powders, Proc. PARTEC 2001, International Congress for Particle Technology, Nürnberg, 27-29 März 2001
/108/ Mulhem, B.; Schulte, G.; Fritsching, U.; Bauckhage, K.: Atomization of Suspension in Twin-Fluid Atomizer, Proc. PARTEC 2001, International Congress for Particle Technology, Nürnberg, 27-29 März 2001
/107/ Kühne, U.; Fritsching, U.; Bauckhage, K.: Förderung feindisperser Metallpulver, in: Einsatz innovativer Energieträger in der Verfahrenstechnik II, Hrsg.: Barthen, D.; Schmidt-Traub, H.; Shaker Verlag Aachen 2001, S. 145 - 158
/106/ Heck, U.; Fritsching, U.; Bauckhage, K.: Fluid Flow and Heat Transfer in Gas Jet Quenching, Int. Journal Numerical Methods for Heat & Fluid Flow 11 (2001) 1; S. 36 - 49
2000
/105/ Mulhem, B.; Fritsching, U.; Schulte, G.; Bauckhage, K.: Atomization of Suspensions in a Twin-Fluid Atomizer, IFPRI-Annual Meeting 2000, 9.7.-14.7.2000, Scheveningen, Niederlande, Proceedings
/104/ Bauckhage, K.; Uhlenwinkel, U.; Fritsching, U. (Hrsg.): Proceedings of the Spray Deposition and Melt Atomization Conference SDMA 2000, 26.-28. Juni 2000, Bremen, Univ. Bremen 2000, ISBN: 3-88722-473-6
/103/ Krauss, M.; Bergmann, D.; Fritsching, U.: In-Situ Particle Temperature, Velocity and Size Measurements in the Spray Forming Process, Proc. Spray Deposition and Melt Atomization SDMA 2000, 26.-28. Juni 2000, Bremen, S. 659 - 670
/102/ Markus, S.; Fritsching, U.; Bauckhage, K.: Jet Break Up of Liquid Metals, Proc. Spray Deposition and Melt Atomization SDMA 2000, 26.-28. Juni 2000, Bremen, S. 497 - 510
/101/ Meyer, O.; Fritsching, U.; Bauckhage, K.: Numerical Investigation of Alternative Process Conditions for Influencing the Thermal History of Spray Deposited Billets, Proc. Spray Deposition and Melt Atomization SDMA 2000, 26.-28. Juni 2000, Bremen, S. 771 - 788
/100/ Büngener, N.; Schöne, A.; Fritsching, U.: Zum kontinuierlich thermisch-chemischen Aufschäumen und Ausbringen von Aluminium und Aluminiumlegierungen, Mat.-wiss. u. Werkstofftech. 31 (2000), S. 535 - 537
/99/ Gillandt, I.; Crowe, C.T.; Fritsching, U.: Analysis of Turbulence Modulation Effects in Dispersed Two-Phase Jet Flow, Proc. ASME FEDSM 2000: June 11-15, 2000, Boston Massachusetts, FED-Vol. 251, The American Society of Mechanical Engineers 2000
/98/ Bergmann, D.; Fritsching, U.; Bauckhage, K.: A mathematical model for cooling and rapid solidification of molten metal droplets, Int. J. Therm. Sci. 39 (2000), S. 53 - 62
/97/ Heck, U.; Fritsching, U.; Bauckhage, K.: Gas-Flow Effects on Twin-Fluid Atomization of Liquid Metals, Atomization & Sprays 10 (2000) 1, S. 25 - 46
/96/ Bauckhage, K.; Fritsching, U.: Production of Metal Powders by Gas Atomization, in: Liquid Metal Atomization: Fundamentals and Practice, Eds.: Cooper, K.P.; Anderson, I.E.; Ridder, S.D.; Biancaniello F.S., TMS, Warrendale, USA, June 2000, S. 23 - 36
1999
/95/ Bauckhage, K.; Fritsching, U.; Schulte, G. (Hrsg.): Proceedings Spray ´99, 5. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Univ. Bremen, 5. und 6. Oktober 1999, ISBN 3-88722-448-5
/94/ Bergmann, D.; Fritsching, U.; Bauckhage, K.: Coupled Simulation of Molten Metal Droplet Sprays, 8th Int. Symp. Comp. Fluid Dynamics ISCFD´99, 5.- 10. September 1999, Bremen, Proceedings, Ed.: H.J. Rath
/93/ Schneider, A.; Mulhem, B.; Fritsching, U.: Zur aerodynamisch angeregten Zweistoffzerstäubung, Spray ´99, 5. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Univ. Bremen, Eds.: Bauckhage, K.; Schulte, G.; Fritsching, U., 5. und 6. Oktober 1999
/92/ Gillandt, I.; Fritsching, U.: Turbulenzmodulationseffekte im zweiphasigen Freistrahl, Spray ´99, 5. Workshop über Techniken der Fluidzerstäubung und Untersuchung von Sprühvorgängen, Univ. Bremen, Eds.: Bauckhage, K.; Schulte, G.; Fritsching, U., 5. und 6. Oktober 1999
/91/ Sultan, G.; Schulte, G.; Bauckhage, K.; Fritsching, U.: Effect of Spray Characteristics outside the Measuring Volume on Measurement Results of Phase Doppler Anemometry, 8th Intern. Conf. Laser Anemometry, Advances and Applications, Univ. of Rome La Sapienza; Ed.: A. Cenedese, Rome, Italy, September 6-8, 1999
/90/ Zöller, H.; Fritsching, U.; Ulrich. J.: Simulation and Visualisation of the Flow around a Single Cubic Crystal, BIWIC-99, MLU Halle-Wittenberg, 6. und 7. September 1999, Ed.: J. Ulrich
/89/ Gillandt, I.; Fritsching, U.: Messung der Turbulenzmodulation im zweiphasigen Freistrahl, 7. Fachtagung Lasermethoden in der Strömungsmechanik GALA 1999, Saint-Louis, Frankreich, 27. - 29. September 1999, Hrsg.: Pfeifer, H.J., Schäfer, H.J., Ruck, B., Dopheide, D., Leder, A., Shaker Verlag Aachen, ISBN 3 8265 6447 2
/88/ Fritsching, U.; Markus, S.; Sternowsky, S.; Schulte, G.; Bauckhage, K.: Control of Droplet Characteristics in Liquid Atomization with Suspended Particles, IFPRI - Annual Meeting, Somerset, New Jersey, June 6 - 11, 1999
/87/ Bergmann, D., Bauckhage, K., Fritsching, U.: Modelling the Spray Forming Process, 1999 Int. Conf. Powder Metallurgy & Particulate Materials, June 20 - 24, Vancouver, Canada, Proceedings, Rose, C.L. and Thibodeau, M. (Eds.), Metals Powder Ind. Fed. (MPIF), Princeton, N.J. 1999
/86/ Fritsching, U., Bergmann, D.; Heck, U.; Bauckhage, K.: Particle Size Distribution Width in Gas Atomization of Molten Metals, 1999 Int. Conf. Powder Metallurgy & Particulate Materials, June 20 - 24, Vancouver, Canada, Proceedings, Rose, C.L. and Thibodeau, M. (Eds.), Metals Powder Ind. Fed. (MPIF), Princeton, N.J. 1999
/85/ Hunkel, M., Bergmann, D., Lübben, T., Hoffmann, F., Fritsching, U., Bauckhage, K., Mayr, P.: Modellierung des flexiblen Gasabschreckhärtens, Gaswärme International 48 (1999) 4/5, S. 288 - 290
/84/ Bergmann, D., Heck, U., Fritsching, U., Bauckhage, K.: Heat Transfer and Cooling Characteristics of Individual Parts Gas Quenching, Proc. ASM 3rd Intern. Conf. on Quenching and Control of Distortion, 24-26 March 1999, Prague, Czech Republic
/83/ Fritsching, U., Bauckhage, K.: Sprayforming of Metals, Ullmann´s Encyclopedia of Industrial Chemistry, 6th Edition, 1999 Electronic Release, Wiley VCH, Weinheim 1999
/82/ Fritsching, U., Gillandt, I., Bauckhage, K.: Measurement of Phase Interaction in Dispersed Gas / Particle Two Phase Flow, 2nd Symp. Two Phase Flow Modelling and Experimentation, Pisa, Italy, 23. - 25. Mai 1999; Edizioni ETS, Eds.: Celata, G.P.; di Marco, P.; Shah, R.K.; ISBN 88-467-0177-1; Vol. 3, S. 1419 - 1426, Pisa 1999
/81/ Bergmann, D., Fritsching, U., Bauckhage, K.: Averaging Thermal Conditions in Molten Metal Sprays, Proc. TMS - Annual Meeting, EPD Congress 1999, San Diego USA, Feb. 28 - March 4, 1999, Ed.: Mishra, B.
1998
/80/ Budwig, R.; Prosperetti, A.; Fritsching, U.; Carpenter, B. (Eds.): Symposium on the Manipulation of Particles by External Forcing, in: Proceedings ASME 1998 Fluids Engineering Division Summer Meeting, Washington, DC, June 21-25, 1998, FED-Vol. 245 (CD-ROM)
/79/ Bergmann, D., Fritsching, U., Bauckhage, K.: Modellierung der Abkühlung und raschen Erstarrung von Metalltropfen im Fluge während des Sprühkompaktierens, Kolloquium des SFB 372, Bd. 3, Hrsg.: K. Bauckhage, V. Uhlenwinkel, ISBN 3-88722-419-1, S. 175 - 196 Universität Bremen 1998
/78/ Zöller, H., Fritsching, U., Ulrich, J.: Numerical Simulation of the Flow around a Single Cubic Crystal, Proc. Int. Symp. Industrial Crystallization, 21.-25. September 1998, Tianjin, China, S. 383 - 387
/77b/ Gondesen, B., Heck, U., Lübben, T., Fritsching, U., Hoffmann, F., Bauckhage, K., Mayr, P.: Optimierung der Einzelteilabschreckung im Düsenfeld, Teil 2: Maß- und Formänderungen und numerische Simulation, HTM 53 (1998) 3, S. 194 - 198
/77a/ Gondesen, B., Heck, U., Lübben, T., Fritsching, U., Hoffmann, F., Bauckhage, K., Mayr, P.: Optimierung der Einzelteilabschreckung im Düsenfeld, Teil 1: Einfluß von Düsenfeldparametern auf Abkühlgeschwindigkeit und Oberflächenhärte, HTM 53 (1998) 2, S. 87 – 92
/76/ Heck, U., Fritsching, U.: Dynamik der Phasengrenzfläche bei der Fluidzerstäubung, Proc. 1. CFX-Workshop Mehrphasenströmungen, 16. und 17. September 1997, Bad Dürkheim, 1997
/75/ Fritsching, U., Gillandt, I., Bauckhage, K.: Enhancement of PDA Device for Simultaneous Measurement of Continuous and Dispersed Phase in Two Phase Flow, Proc. Int. Conf. Multiphase Flow 98, Lyon, France, June 8-12, 1998
/74/ Fritsching, U., Heck, U., Bauckhage, K.: Interaction of Supersonic Jets in an Array Configuration, Proc. 1998 ASME Fluids Engineering Division Summer Meeting FEDSM´98, June 21-25, 1998 Washington DC, ASME-FED Vol. 245, 1998
1997
/73/ Gillandt, I., Schulze, T., Fritsching, U., Bauckhage, K.: Simultaneous Measurement of Continuous and Dispersed Phase in a Two Phase Jet Flow, Flow Meas. Instrum. 8 (1997) 3/4, S. 199 - 206
/72/ Heck, U., Fritsching, U., Bauckhage, K.: Zur Fluiddisintegration in Freifall-Zerstäubern, Spray`97, 3. Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, DLR Lampoldshausen, 22.-23. Oktober 1997, Hrsg.: Koschel, W.W., Haidn, O.J., ISBN: 3-89100-029-4
/71/ Gillandt, I., Schulze, T., Fritsching, U., Bauckhage, K.: Adaption of a Phase-Doppler-Anemometry System for Simultaneous Measurement of Continuous and Dispersed Phase in a Two Phase Jet, Proc. Laser Anemometry, Advances and Applications, 8.-11. September 1997, Karlsruhe
/70/ Fritsching, U., Bauckhage, K.: The Interaction of Drops and Particles with Ultrasonic Standing Wave Fields, in: Computational Acoustics and its Environmental Applications, Eds.: Brebbia, C.A., Kenny, J., Ciskowski, R.D., Computational Mechanics Publications, Southampton 1997, S. 150 - 168
/69/ Fritsching, U., Bergmann, D., Heck, U., Bauckhage, K.: Modellierung und Simulation des Sprühkompaktierprozesses, Kolloquium des SFB 372, Bd. 2, Hrsg.: K. Bauckhage, V. Uhlenwinkel, ISBN 3-88722-388-8, Universität Bremen 1997
/68/ Fritsching, U., Bergmann, D., Bauckhage, K.: Metal Solidification during Spray Forming, Int. Conf. Liquid Atomization Spray Systems ICLASS´97, Seoul / Korea, 18.-22. August 1997
/67/ Fritsching, U., Heck, U., Bauckhage, K.: The Gas-Flowfield in the Atomization Region of a Free Fall Atomizer, Int. Conf. Liquid Atomization Spray Systems ICLASS´97, Seoul / Korea: 18.-22. August 1997
/66/ Fritsching, U., Bauckhage, K.: Fluid / Gas - Wechselwirkungen in resonanten Ultraschall-Stehwellen-Feldern, Chem.-Ing.-Tech. 69 (1997) 7, S. 934 - 938
/65/ Gondesen, B., Lübben, Th., Hoffmann, F.T., Mayr, P., Heck, U., Fritsching, U., Bauckhage, K.: Optimization of single part quenching in nozzle fields, ASM 1997 Heat Treating Society Conference, 15.-18. Sept. 1997, Indianapolis, USA, S. 25 - 31
/64/ Chen, M.M., Crowe, C.T., Fritsching, U., Pien, S.J. et al. (Eds.): Transport Phenomena in Materials Processing and Manufacturing, HTD-Vol. 336, FED-Vol. 240, The American Society of Mechanical Engineers ASME, New York 1996
/63/ Fritsching, U., Bauckhage, K.: Ultrasonic Field Characteristics in Resonant Standing Waves, Ultrasonics 35 (1997), Elsevier Publ., S. 151 - 156
1996
/62/ Heck, U., Fritsching, U.: Wärmeübergangsberechnung für Prallstrahlenfelder, 3. CFDS - Nutzertreffen, Stuttgart 10./11. September 1996, Hrsg.: AEA Technology, Waldbronn (1996)
/61/ Muoio, N.G., Crowe, C.T., Bergmann, D., Fritsching, U.: Numerical Simulation of Spray Temperature in Spray Forming Process by Ceramic Powder Injection, ASME IMECE Multiphase Flow and Heat Transfer in Materials Processing, Atlanta, USA, 17.-22. November 1996
/60/ Gillandt, I., Fritsching, U., Riehle, C.: Zur mehrphasigen Strömung in einem Zick-Zack-Sichter, Vergleich experimenteller und numerischer Ergebnisse, Forschung im Ingenieurwesen - Engineering Research 62 (1996) 11/12, VDI-Verlag, S. 315 - 321
/59/ Gillandt, I., Riehle, C., Fritsching, U.: Gas/solid flow in a zig-zag classifier - comparison of measurements and simulations, Symp. Modelling Dispersed Two-Phase Flow, 12th Int. Congress of Chemical and Process Engineering, CHISA `96, Prag, Tschechische Republik, 25.- 30. August 1996
/58/ Crowe, C.T., Fritsching, U.: Multiphase Particle Processes for Manufacturing, Proc. Vision Workshop Emerging Particle Technologies at the 2nd Int. Particle Technology Forum in conjunction with the 5th World Congress of Chemical Engineering, Ed: M.C. Roco, San Diego California, July 14, 1996
/57/ Muoio, N., Crowe, C.T., Fritsching, U., Bergmann, D.: Effect of Thermal Coupling on Numerical Simulations of the Spray Forming Process, 2nd Int. Symp. Numerical Methods for Multiphase Flows, San Diego, USA, 7. - 11. Juli 1996, proceedings
/56/ Fritsching, U., Bauckhage, K.: Characteristics of Ultrasonic Standing Wave Fields and their Interaction with Drops and Particles, 2nd Int. Symp. Numerical Methods for Multiphase Flows, San Diego, USA, 7. - 11. Juli 1996, proceedings
/55/ Bauckhage, K., Fritsching, U., Schulte, G. (Hrsg.): SPRAY `96, 2. Workshop über Sprays, Erfassung von Sprühvorgängen und Techniken der Fluidzerstäubung, Bremen, 4. und 5. Juni 1996, ISBN 3-88722-364-0
/54/ Bauckhage, K., Fritsching, U., Uhlenwinkel, V.: Influence of Ultrasonic Standing-Wave on Heat Transfer, 2nd European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, 29. - 31. Mai 1996, proceedings
/53/ Muoio, N.G., Crowe, C.T., Bergmann, D., Fritsching, U.: Numerical simulation of the Turbulent Gas-Droplet Field in Spray Forming, 3rd Int. Symp. Engng. Turbulence Modelling and Measurements, Kreta, Griechenland, 27. - 29. Mai 1996
/52/ Fritsching, U.: Mehrphasenströmung: Verfahrenstechnische Bilanzierung von Impuls-, Wärme- und Stoffströmen, Vorlesungsskript Universität Bremen, Schriftenreihe Vt-Uni Bremen 1996
/51/ Gillandt, I., Riehle, C., Fritsching, U.: Gas-Solid Flow in a Zig-Zag Classifier - Comparison of Measurements and Simulations, Proceedings of the 8th Workshop on Two-Phase Flow Predictions, Merseburg, 26. - 29. 3. 1996, Ed.: M. Sommerfeld, Martin-Luther-Univ. Halle-Wittenberg, 2000
/50/ Fritsching, U., Bauckhage, K.: Gas - Particle Interactions in Resonant Ultrasonic Standing Waves, Proceedings of the 8th Workshop on Two-Phase Flow Predictions, Merseburg, 26. - 29. 3. 1996, Ed.: M. Sommerfeld, Martin-Luther-Univ. Halle-Wittenberg, 2000
1995
/49/ Heck, U., Fritsching, U.: Berechnung des Wärmeübergangs an von Düsensystemen senkrecht angeströmten ebenen Flächen, CFDS-Nutzertreffen, Stuttgart 19./20. Sept. 1995, Hrsg.: AEA Technology, Waldbronn (1995)
/48/ Fritsching, U., Andersen, O., Bauckhage, K.: Nonlinear Computation of Ultrasonic Field Characteristics in Standing Waves for Fluid Atomization, 1995 World Congress on Ultrasonics, Berlin 2. - 7. Sept. 1995, proceedings
/47/ Fritsching, U., Wriedt, T.: Application of PDA in Difficult Process Einvironment, 1st French-German Seminar: Research on Liquid Rocket Propulsion - Combustion Phenomena Studies, Strasburg, 27. - 28. März 1995, proceedings C-3
/46/ Muoio, N.G., Crowe, C.T., Fritsching, U., Bergmann, D.: Modelling Metal Droplet Sprays in Spray Forming, ASME FED Vol. 223 (1995), S. 111 - 115
/45/ Fritsching, U.: Modelling the Spray Cone Behaviour in the Metal Spray Forming Process, Momentum and Thermal Coupling in Two-Phase Flow, PHOENICS J. Comp. Fluid Dynamics, 8 (1995) 1, S. 68 - 90
/44/ Fritsching, U., Rheims, J., Wriedt, T., Bauckhage, K.: Use of Homogeneously Absorbing Materials for Research in Dispersed Multiphase Flows, Proceedings International Symposium on Measuring Techniques for Multiphase Flows, Nanjing, China, 10. - 13. April 1995
/43/ Wriedt, T., Mitschke, M., Fritsching, U., Bauckhage, K.: Measurement of Optically Inhomogeneous Droplets by Phase-Doppler-Anemometry, Proceedings International Symposium on Measuring Techniques for Multiphase Flows, Nanjing, China, 10. - 13. April 1995
/42/ Bauckhage, K., Fritsching, U.: Powder Production from Melts by Ultrasonic-Standing Wave-Atomization, Proc. 2nd Intern. Conf. on Multiphase Flow, Kyoto, Japan, 3. - 7. April 1995
/41/ Wriedt, T., Mitschke, M., Fritsching, U., Bauckhage, K.: Inversion of PDA Particle Size Distributions from Sprays of an Optically Inhomogeneous Liquid, Proc. 2nd Intern. Conf. on Multiphase Flow, Kyoto, Japan, 3. - 7. April 1995
/40/ Bergmann, D., Fritsching, U., Crowe, C.T.: Multiphase Flows in the Spray Forming Process, Proceedings 2nd International Conference on Multiphase Flow, Kyoto, Japan, 3. - 7. April 1995, Vol. 1, S. SP1 - SP8
1994
/39/ Fritsching, U., Bauckhage, K.: Momentum Transfer Between a Fluid in Laminar Shear Flow and a Spherical Particle, Int. Chem. Eng. 34 (1994) 3, S. 292 - 294
/38/ Fritsching, U., Bauckhage, K.: Thermal Treatment and Conditions of the Deposit in Spray Forming Applications, in: Multiphase Flow and Heat Transfer in Materials Processing, presented at International Mechanical Engineering Congress 94, Chicago, USA, November 6 - 11 1994, ASME-FED Vol. 201, Eds.: Chen, M.M., Crowe, C.T., S. 7 - 18
/37/ Fritsching, U., Bauckhage, K.: Spray Modelling in Spray Forming, in: Multiphase Flow and Heat Transfer in Materials Processing, presented at International Mechanical Engineering Congress 94, Chicago, USA, November 6 - 11 1994, ASME-FED Vol. 201, Eds.: Chen, M.M., Crowe, C.T., S. 49 - 54
/36/ Fritsching, U., Bauckhage, K.: Sprays and Jets for Metallurgical Applications, Proceedings 7th Workshop on Two-Phase Flow Predictions, Erlangen, April 11 - 14, 1994
/35/ Fritsching, U., Zhang, H., Bauckhage, K.: Numerical Results of Temperature Distribution and Solidification Behaviour during Spray Forming, steel research 65 (1994) 8, S. 322 - 325
/34/ Fritsching, U., Zhang, H., Bauckhage, K.: Numerical Simulation of Temperature Distribution and Solidification Behaviour during Spray Forming, steel research 65 (1994) 7, S. 273 - 278
/33/ Fritsching, U., Bauckhage, K.: Zum Impuls- und Wärmetransport bei der Zerstäubung und anschließenden Kompaktierung von Schmelzen, Chem.-Ing.-Tech. 66 (1994) 3, S. 380 - 382
1993
/32/ Fritsching, U., Zhang, H., Bauckhage, K.: Modelling of Thermal Histories and Solidification in the Spray Cone and Deposit of Atomised and Compacted Metals, Proceedings International Conference on Spray Forming, ICSF-2, Swansea, UK, 13-15 September 1993
/31/ Fritsching, U., Bauckhage, K.: Lagrangian Modelling of Thermal and Kinetic Droplet/Particle Behaviour in the Metal Spray Compaction Process, Proceedings ILASS-93 / CHISA-93, Prag, CR, 29. August - 3. September 1993
/30/ Fritsching, U., Zhang, H., Bauckhage, K.: Thermal Histories of Atomized and Compacted Metals, Proceedings Powder Metallurgy World Congress PM-93, Kyoto, Japan, 12-15 Juli 1993
/29/ Fritsching, U., Uhlenwinkel, V., Bauckhage, K.: Spreading of the Spray Cone for Spray Forming Applications, Proceedings Powder Metallurgy World Congress, PM-93, Kyoto, Japan, 12-15 Juli 1993
1992
/28/ Fritsching, U., Bauckhage, K.: The Momentum Exchange between Fluid and a Sphere Shaped Particle in Laminar Shear Flow, Silsoe Res. Inst. Transl. No. 40, Dec. 1992
/27/ Fritsching, U., Bauckhage, K.: Investigations on the atomization of molten metals: The coaxial jet and the gas flow in the nozzle near field, PHOENICS J. Comp. Fluid Dynamics 5 (1992) 1, 81-98
1991
/26/ Fritsching, U., Liu, H., Bauckhage, K.: Two-Phase Flow and Heat Transfer in the Metal Spray Compaction Process, Proceedings International Conference on Multiphase Flows '91, Tsukuba, Japan, September 24-27, 1991
/25/ Fritsching, U., Bauckhage, K.: The Behaviour of Spherical Particles in Laminar Shear Flow, A Numerical and Experimental Approach, Proceedings International Conference on Multiphase Flows '91, Tsukuba, Japan, September 24-27, 1991
/24/ Fritsching, U., Bauckhage, K.: Zum Impulsaustausch zwischen Fluid und einer kugelförmigen Partikel in laminarer Scherströmung, Chem.-Ing.-Tech. 12 (1991) 1260-1261
/23/ Fritsching, U., Liu, H., Bauckhage, K.: Numerical Modelling in the Spray Compaction Process, Proceedings of the Fifth International conference on Liquid Atomization and Spray Systems, ICLASS-91, Gaithersburg, M.D., USA, NIST SP813 (1991), S. 491-498
/22/ Uhlenwinkel, V., Fritsching, U., Bauckhage, K.: The Influence of Spray Parameters on Local Mass Fluxes and Deposit Growth rates During Spray Compaction Process, Proceedings of the Fifth International conference on Liquid Atomization and Spray Systems, ICLASS-91, Gaithersburg, M.D., USA, NIST SP813 (1991), S. 483-490
1990 und früher
/21/ Uhlenwinkel, V., Fritsching, U., Bauckhage K., Urlau, U.: Strömungsuntersuchungen im Düsen-nahbereich einer Zweistoffdüse - Modelluntersuchungen für die Zerstäubung von Metallschmelzen, Chem.-Ing. Tech. 62 (1990) 3, 228-229, Synopse 1840
/20/ Fritsching, U., Uhlenwinkel, V., Bauckhage, K., Urlau, U.: Gas und Partikelströmungen im Dü-sennahbereich einer Zweistoffdüse, Modelluntersuchungen zur Zerstäubung von Metallschmelzen, Chem.-Ing.-Tech. 62 (1990) 2, 146-147
/19/ Fritsching, U.: Simulation der Umströmung sphärischer und zylindrischer Körper in laminarer Scheranströmung, Dissertation Universität Bremen, Fortschritts-Berichte VDI, Reihe 7, Nr. 184, VDI-Verlag Düsseldorf 1990
/18/ Fritsching, U.: Investigations on the Atomization of Molten Metals, Institute of Liquid Atomization and Spraying Systems, European Meeting, ILASS-89, Bremen, Juli 1989, Proceedings
/17/ Uhlenwinkel, V., Fritsching, U., Bauckhage, K.: Strömungsuntersuchungen im Düsennahbereich einer Zweistoffdüse, TIZ International Powder Magazine 113 (1989) 11, S. 890 f.
/16/ Dannehl, M., Fritsching, U., Schulte, G., Uhlenwinkel, V.: Analysis of drop size and drop motion in sprays on an internal and external mixing pneumatic atomizer, 3rd Intern. Conf. Laser Anemometry, Adv. and Appl., 26.-29.9.1989, Swansea/U.K., p 17.1
/15/ Fritsching, U., Bauckhage, K.: Numerical Investigations on the Atomization of Molten Metals, 3rd Int. PHOENICS-User Conference, Dubrovnik, August 28 - September 1, 1989, publ. CHAM Ltd., Lon-don, proceedings
/14/ Fritsching, U., Bauckhage, K.: Lateral forces on spherical bodies in shear flow, 3rd Int. PHOENICS-User Conference, Dubrovnik, August 28 - September 1, 1989, publ. CHAM Ltd., London, proceedings
/13/ Bauckhage, K., Flögel, H.-H., Fritsching, U., Hiller, R.: The Phase-Doppler-Difference-Method, a New Laser-Doppler Technique for Simultaneous Size and Velocity Measurements, Part 2: Optical Particle Characteristics as a Base for the New Diagnostic Technique, Particle & Particle Systems Characterization 5 (1988), S. 66 - 71
/12/ Bauckhage, K., Liu, H.M., Fritsching, U.: Models for the Transport Phenomena in a New Spray Compacting Process, 4th Intern. Conf. on Liquid Atomization and Spray Systems, ICLASS `88, Sen-dai/Japan, 21.-24.8.1988, proceedings, published by The Fuel Society of Japan, Tokyo 1988, pp. 424 - 430
/11/ Fritsching, U., Bauckhage, K.: Kinetics and Kinematics of Freely Moving Bodies in Shear Flow, Proc. Intern. Conf. on Mathematical Modelling in Science and Technology, Madras, India, Aug. 11-14, 1988, Eds.: N.V.C. Swamy, P. Achuthan, S.N. Majhi, Tata McGraw-Hill Publishing New Delhi, S. 172 - 179
/10/ Bauckhage, K., Fritsching, U., Heuermann, J., Schulte, G.: Particle size and velocity measure-ment on flows transparent or non transparent spherical particles by Laser-Doppler-Anemometry, prob-lems of practical application, presented at: Conference "Laser Technologies in Industry", Porto/Portugal, 6.-8.6.1988
/9/ Bauckhage, K., Flögel, H.-H., Fritsching, U., Hiller, R.: Simultaneous Measurement of the Size and Velocity of Spherical Metal Particles using the Phase-Doppler-Method, 2nd Intern. Conf. on Laser Anemometry - Advances and Applications, 21.-23.9.1987, Strathclyde / UK - proceedings
/8/ Bauckhage, K., Dannehl, M., Fritsching, U., Schöne, F., Schulte, G.: Phase Doppler Measure-ments of Drop Size and Velocity in the Spray Cone of a Pressure Nozzle and a Pneumatic Atomizer, 2nd Intern. Conf. on Laser Anemometry - Advances and Applications, 21.-23.9.1987, Strathclyde / UK, proceedings
/7/ Schulte, G., Bauckhage, K., Flögel, H.-H., Fritsching, U.: Two-Dimensional Distributions of Drop Size and Velocity for the Characterization of the Atomization of Water using a Fan Spray Atomizer, CHISA `87, 30.8.-4.9.1987, Prag/CSSR
/6/ Bauckhage, K., Fritsching, U., Schöne, F.: Analysis of the Two-Phase-Flow in the Spray Cone of a Fan Type Nozzle for Water Atomisation, Intern. Conf. of Fluid Mechanics, 1.-4.7.1987, Peking / VR China, proceedings
/5/ Bauckhage, K., Fritsching, U., Schöne, F., Schulte, G.: Size and Velocity Measurements of Spherical Particles in Multiphase Flow Systems, 12th Intern. Congress on Instrumentation in Aero-space Simulation Facilities, 22.-25.6.1987, Williamsburg/USA
/4/ Fritsching, U., Bauckhage, K.: Die Bewegung von Tropfen im Sprühkegel einer Ein- und einer Zweistoffdüse, Chem.-Ing.-Tech. 59 (1987) 9, 744-745
/3/ Bauckhage, K., Flögel, H.-H., Fritsching, U., Hiller, R., Schöne, F.: Analysis of Particle Sizes with the Aid of Laser-Doppler-Anemometry: The Influence of Specific Geometrical and Optical Properties of Particles, 3rd Intern. Symp. on Appl. of Laser Anemometry to Fluid Mechanics, 7.-9.7.1986, Lis-bon/Portugal, p 18.5
/2/ Schulte, G., Bauckhage, K., Flögel, H.-H., Fritsching, U.: Two-Dimensional Distributions of Drop Size and Velocity Measured by Phase Doppler Method in the Spray Cone of a Fan Spray Atomizer, 3rd Intern. Symp. on Appl. of Laser Anemometry to Fluid Mechanics, 7.-9.7.1986, Lisbon/Portugal
/1/ Fritsching, U., Panahi, Z., Stojanoff, C.G.: Development of a computer program for the hydrody-namic equations of the recirculating flow in the lower convective zone of a Solar Pond, DRI 4/83, De-sert Research Institute - Energy Systems Center, Nevada-USA (1983)
Seite drucken
